Official 22LR setup pictures thread !! - Page 42

AR Sponsor:

Site Notices

Official 22LR setup pictures thread !! (Page 42 of 51)

icecoast Joined Dec 2015 Posts 53 EE 100% (58) USA	Posted: 10/26/2016 1:27:07 PM EDT [#1] I had this upper sitting in the safe for almost a year and finally got it to run reliably. After that it absorbed most of my spare parts and became its own rifle. Chiappa barrel and bolt now reside in anderson upper. I can't decide if I should cut it down and pin on a surefire 3p I just removed from another rifle.

Shaggy6005 Joined Oct 2016 Posts 3 EE 0% (0) KY, USA	Posted: 10/27/2016 5:46:25 PM EDT [#2]

xwarp Mr. Joined May 2007 Posts 7290 EE 100% (8) AZ, USA	Posted: 12/31/2016 5:55:36 AM EDT [#3] Here's an updated picture: Attached File
	82ND-ABN: "It is wise to consume at least eight beers prior to posting on AR15.com. It will enhance your English composition skills to a tier one operator level."

OilfieldTrash78 Member Joined Sep 2012 Posts 1937 EE 100% (253) TX, USA	Posted: 1/6/2017 8:21:20 PM EDT [#4] My .22 upper I just put together.... Attached File

GrimEReaper Joined Jan 2015 Posts 1595 EE 100% (2) MS, USA	Posted: 1/7/2017 12:33:39 PM EDT [#5] Quote History Originally Posted By OilfieldTrash78: My .22 upper I just put together.... https://www.AR15.Com/media/mediaFiles/315898/IMG-1073-120828.JPG View Quote Nice! What specs?

Outrider Black Rifle Disease Joined Mar 2009 Posts 4391 EE 100% (372) AL, USA	Posted: 1/7/2017 4:39:19 PM EDT [#6]

IntenseImage Joined Feb 2013 Posts 6 EE 100% (3) PA, USA	Posted: 1/7/2017 8:35:41 PM EDT [#7] Built this ULW 22 for my daughter and since the lower was SBRd, built a little 300bo to go w it

OilfieldTrash78

Member

Joined Sep 2012
Posts 1939
EE 100% (253)

TX, USA

Posted: 1/7/2017 10:57:47 PM EDT

[#8]

Quote History

Originally Posted By GrimEReaper:

Nice! What specs?

View Quote View All Quotes

View All Quotes

Quote History

Originally Posted By GrimEReaper:

Originally Posted By OilfieldTrash78:
My .22 upper I just put together....
https://www.AR15.Com/media/mediaFiles/315898/IMG-1073-120828.JPG

Nice! What specs?

The lower is an SBR PSA lower with a Boonie Packer adapter.
Upper:
M&P 15 Sport receiver
CMMG 4.5" barrel and BCG
Cheapo Guntec 7" MLOK rail
M&P 15-22 sights
SilencerCo Spectre II

dominicandemon Joined Aug 2012 Posts 27 EE 100% (6) IN, USA	Posted: 1/13/2017 1:27:46 PM EDT [#9] I already have a CMMG 22lr conversion.. is there a cheap, threaded 4.5" barrel option?

xwarp Mr. Joined May 2007 Posts 7315 EE 100% (8) AZ, USA	Posted: 1/13/2017 2:00:18 PM EDT [#10] Quote History Originally Posted By dominicandemon: I already have a CMMG 22lr conversion.. is there a cheap, threaded 4.5" barrel option? View Quote Site member/dealer "Hochimin" might have 4.5" Spike .22lr barrels. I got one from him a while back.
	82ND-ABN: "It is wise to consume at least eight beers prior to posting on AR15.com. It will enhance your English composition skills to a tier one operator level."

jeepfreek

Joined Nov 2006
Posts 184
EE 100% (9)

OR, USA

Posted: 1/13/2017 10:57:08 PM EDT

[#11]

16" Spike's .22 middy barrel from hochimin on EE

Olympic cast post ban neutered .750 front sight base

Ceiner kit that was originally supplied with the Spike's rifles

D style buttstock, mottled grip, A1 handguards

605 style upper receiver purchased on the EE

Repro 3 prong

Using Black Dog and Ceiner mags

I popped the pins on the original front sight base and tapped the holes in the Oly base at 6-32. I also tapped the gas tube hole 8-32 and attached the triangle handguard cap to the sight base. I then installed the handguards, dropped the sight base on, installed the 3 prong and tightened it against the sight. I checked sight alignment, then installed 4 6-32 headless set screws to lock the sight on. I still have to take it out and run it. It's on a Bushy lower right now, but I'll mark and cut an 80% for it. I love the 605 look, so it was a no brainer to do this.

Boosdady Member Joined Nov 2002 Posts 213 EE 100% (76) WA, USA	Posted: 1/13/2017 11:06:26 PM EDT [#12] Quote History Originally Posted By dominicandemon: I already have a CMMG 22lr conversion.. is there a cheap, threaded 4.5" barrel option? View Quote Depends on your idea of cheap. CMMG makes a quality 4.5" barrel that can be had for less than $100 online.

Brazz04 Joined Jan 2017 Posts 1 EE 100% (3) TX, USA	Posted: 1/29/2017 11:36:34 AM EDT [Last Edit: Brazz04] [#13] Here's my contribution. Aero Precision Upper, Lower, 7" Rail. Taccom bolt, pressure plug, and 4" ULW Barrel. Mega Arms Trigger. Thompson Machine CHD, I hope it's out of jail soon!

Rick_A

Joined Mar 2008
Posts 4971
EE 0% (0)

FL, USA

Posted: 2/14/2017 2:42:17 PM EDT

[#14]

My latest.

CMMG 4.5" barrel and bolt assy
Anderson upper/lower
Slipstream Precision 22lr receiver plug
Superstition Precision muzzle device
UTG red dot
Lone Star Ordnance Stoway grip
KNS pins
EMA tactical single point sling
Generic/takeoff everything else

20170214_002204_Richtone(HDR) by Slick_Rick77, on Flickr

Also used with a 7" FF tube and GM-22 on an SBR lower

20170212_014442_Richtone(HDR) by Slick_Rick77, on Flickr

Messer Joined Oct 2004 Posts 1115 EE 100% (2) VA, USA	Posted: 2/14/2017 2:54:12 PM EDT [Last Edit: Messer] [#15] My 22LR dedicated upper on my SBR lower. 4.5" CMMG barrel, 7" Aero Precision M-Lok Handguard, SilenceCo Sparrow, Holosun H503C sight, LWRC UCIW Stock, Magpul K2+ grip, Geissele SD3G Trigger

vbpylot Joined Mar 2013 Posts 14 EE 0% (0) VA, USA	Posted: 2/14/2017 10:22:49 PM EDT [Last Edit: vbpylot] [#16] Just finished my build! Spent waaaay too much on it! Anderson Lower Bootleg Inc stripped upper Taccom 17" ULW Barrel Seekins MCSR 12" Handguard MFT Grip MFT Minamalist Stock CMMG ARC Bolt w/ collar Strike Industries Link foregrip

Lead-slinger Mommy, he voted for Trump. Joined Nov 2009 Posts 2433 EE 0% (0) OR, USA	Posted: 2/15/2017 12:07:46 AM EDT [#17] Attached File
	Remember, no matter where you're at, there you are.

02Overlander Member Joined Mar 2004 Posts 3917 EE 100% (50) SC, USA	Posted: 2/16/2017 2:37:29 AM EDT [#18] Ops Inc 15th / Geissele SSA
	OEF 2001/2002 \| OIF 2003/2004

gkgeiger Joined Jul 2016 Posts 57 EE 0% (0) OH, USA	Posted: 2/16/2017 1:00:21 PM EDT [#19] My M&P 15-22 Sport.

Outrider Black Rifle Disease Joined Mar 2009 Posts 4714 EE 100% (372) AL, USA	Posted: 2/26/2017 1:04:46 PM EDT [#20]

stagepaint Member Joined Sep 2009 Posts 1058 EE 100% (26) VA, USA	Posted: 3/7/2017 1:47:37 PM EDT [Last Edit: stagepaint] [#21] Quote History Originally Posted By Outrider: http://i.imgur.com/fosdgBQ.jpg http://i.imgur.com/bzMCeUZ.jpg http://i.imgur.com/WvrvPGg.jpg View Quote How does the back of the receiver look with that stock folded? I'm interested in using that stock when I have a lower dedicated to my .22 upper.

Lead-slinger

Mommy, he voted for Trump.

Joined Nov 2009
Posts 2522
EE 0% (0)

OR, USA

Posted: 3/7/2017 11:06:23 PM EDT

[#22]

Quote History

Originally Posted By stagepaint:

How does the back of the receiver look with that stock folded? I'm interested in using that stock when I have a lower dedicated to my .22 upper.

View Quote View All Quotes

View All Quotes

Quote History

Originally Posted By stagepaint:

Originally Posted By Outrider:
http://i.imgur.com/fosdgBQ.jpg

http://i.imgur.com/bzMCeUZ.jpg

http://i.imgur.com/WvrvPGg.jpg

How does the back of the receiver look with that stock folded? I'm interested in using that stock when I have a lower dedicated to my .22 upper.

Yes this intrests me as well. We need details. What is it.

Remember, no matter where you're at, there you are.

AlabamaPaul In Pursuit of Silence Joined Dec 2012 Posts 5047 EE 100% (4) AL, USA	Posted: 3/8/2017 9:45:08 AM EDT [#23] Quote History Originally Posted By Lead-slinger: Yes this intrests me as well. We need details. What is it. View Quote It looks like an APG folding stock.

Outrider

Black Rifle Disease

Joined Mar 2009
Posts 4801
EE 100% (372)

AL, USA

Posted: 3/8/2017 10:41:00 AM EDT

[#24]

Quote History

Originally Posted By AlabamaPaul:
It looks like an APG folding stock.

View Quote

It is.

There is a threaded disc that fits into the buffer tube threads. The 4 allen heads attached to this threaded disc. It may be hard to see but there is a small delrin circle that fits in the end plate hole that prevents the stock assembly from rotating much like the end plate does on a normal AR. It's a really well made kit that I've been very happy with. Excuse the red paint pen mess from prior witness marks.

Robocop1051 Joined Feb 2010 Posts 35 EE 100% (1) CA, USA	Posted: 3/8/2017 12:22:02 PM EDT [#25] Spent way too much $$ on a .22lr, lol

stagepaint

Member

Joined Sep 2009
Posts 1059
EE 100% (26)

VA, USA

Posted: 3/8/2017 3:03:32 PM EDT

[#26]

Quote History

Originally Posted By Outrider:

It is.

There is a threaded disc that fits into the buffer tube threads. The 4 allen heads attached to this threaded disc. It may be hard to see but there is a small delrin circle that fits in the end plate hole that prevents the stock assembly from rotating much like the end plate does on a normal AR. It's a really well made kit that I've been very happy with. Excuse the red paint pen mess from prior witness marks.

http://i.imgur.com/9kEQ3d0.jpg

View Quote

Nice. Does the threaded disc in the buffer tube threads butt up against the BCG? I have the Taccom plug that goes in the normal buffer tube in front of the buffer that helped feeding in my rifle.

Here's a pic because pic thread.

Attached File

Outrider

Black Rifle Disease

Joined Mar 2009
Posts 4807
EE 100% (372)

AL, USA

Posted: 3/8/2017 3:55:41 PM EDT

[#27]

Quote History

Originally Posted By stagepaint:

Nice. Does the threaded disc in the buffer tube threads butt up against the BCG? I have the Taccom plug that goes in the normal buffer tube in front of the buffer that helped feeding in my rifle.

Here's a pic because pic thread.

https://www.AR15.Com/media/mediaFiles/219864/unnamed-1-161612.JPG

View Quote

You can adjust it if you'd like. There is a tensioning screw (middle hole between the 4x hex) much like you find in some lower receivers.

20andOUT dirty blue shirt Joined Jul 2005 Posts 1936 EE 100% (38) WA, USA	Posted: 3/10/2017 12:06:11 AM EDT [#28] Attached File Attached File These 22lr sbr builds are an absolute blast, but the blowback is fierce... I might need to buy some swim goggles. 4.5" barrel with a sparrow. -Mike
	"Penetration , however slight, is sufficient to complete the offense" -UCMJ ART. 125

Outrider

Black Rifle Disease

Joined Mar 2009
Posts 4821
EE 100% (372)

AL, USA

Posted: 3/10/2017 11:28:02 AM EDT

[#29]

Quote History

Originally Posted By mjmjr1312:
https://www.AR15.Com/media/mediaFiles/77352/IMG-0498-162693.JPG
https://www.AR15.Com/media/mediaFiles/77352/IMG-0497-162695.JPG

These 22lr sbr builds are an absolute blast, but the blowback is fierce... I might need to buy some swim goggles.

4.5" barrel with a sparrow.

-Mike

View Quote

Nice build! Good to see another AGP user. Are you a lefty? I don't notice any blowback with mine. I imagine it's coming out of the port door so you could maybe consider a 9mm upper with the large gas/shell deflector.

20andOUT dirty blue shirt Joined Jul 2005 Posts 1938 EE 100% (38) WA, USA	Posted: 3/10/2017 5:10:19 PM EDT [#30] I'm right handed, I think it might just be the ammo. I'm probably going to rtv it -Mike
	"Penetration , however slight, is sufficient to complete the offense" -UCMJ ART. 125

Rick_A Joined Mar 2008 Posts 5037 EE 0% (0) FL, USA	Posted: 5/10/2017 11:03:08 PM EDT [#31] Snubby and stealth configurations. 20170510_084839(0) by Slick_Rick77, on Flickr 20170510_084447 by Slick_Rick77, on Flickr

Unattributed Member Joined Jul 2014 Posts 488 EE 100% (36) USA	Posted: 5/10/2017 11:29:52 PM EDT [#32] Attached File

ViktorVaughn Rock Chalk John Brown Hawk! Joined Dec 2010 Posts 612 EE 100% (13) MO, USA	Posted: 6/20/2017 11:02:56 PM EDT [#33] CMMG 4.5" with Sparrow

Ben762 Where is your emergency? Joined Mar 2006 Posts 5072 EE 100% (47) OR, USA	Posted: 7/15/2017 1:26:38 PM EDT [#34] I dropped in a $99 MBT and a 12" ALG V3... I learned that Spike's puts their barrel nuts on tight. Attached File
	"Basically, it's just a bunch of sloganeering morons congratulating each other for being so intellectual and free thinking." -cyborg543, regarding DU

Muzap Member Joined Jun 2014 Posts 284 EE 100% (67) AZ, USA	Posted: 7/23/2017 4:06:19 PM EDT [#35] Attached File

Balloo Call Sign- Mick Joined Jan 2008 Posts 7874 EE 100% (275) TX, USA	Posted: 7/25/2017 9:48:29 PM EDT [#36]
	Blessed be the Lord, my rock, Who trains my hands for war, And my fingers for battle. - Psalm 144:1

carl1000

Member

Joined Mar 2007
Posts 573
EE 100% (118)

TN, USA

Posted: 8/1/2017 5:41:57 PM EDT

[Last Edit: carl1000] [#37]

This thing rocks! TACCOM Upper, bolt and Carbon Fiber 11.5" barrel. The eotch 512 I scored for $200 broke, but Eotech fixed it free no questions asked. FA III trigger. Balckdog 50 round mags works perfectly with Gemtech .22 subs and other supersonics. But it doesn't work well at all with CCI subs. I think the nose is a little flatter on those. But they do work in the BD 10 round mags fine. Fun fun rifle. Also an AAC Element 2 can.

Magdumpguns Member Joined Jul 2017 Posts 6 EE 0% (0) NC, USA	Posted: 8/12/2017 10:43:03 PM EDT [#38] Here's my M&P 15/22: Failed To Load Title https://www.youtube.com/watch?v=0dtq8BJWEFA

verge Joined Jan 2011 Posts 80 EE 100% (2) TX, USA	Posted: 8/25/2017 5:13:08 PM EDT [Last Edit: verge] [#39] Here's mine. PSA Stripped Upper Receiver CMMG 9" Barrel and Collar Kit Strike Industries MEGAFINS XL Rail with MLOK, 10in. Primary Arms Advanced Micro Dot Streamlight TLR-4 LUCID 2-5x Variable Magnifier Huntertown Arms Kestrel 5.56 Silencer

CaptShiess Joined Nov 2006 Posts 2398 EE 100% (243) UT, USA	Posted: 10/7/2017 10:53:42 PM EDT [Last Edit: CaptShiess] [#40] Just swapped my stock to the Troy. I’ve probably spent way too much on this .22 but it works great for my little kids. Functions 100%!

scottMO Member Joined Feb 2001 Posts 7247 EE 100% (944) AR, USA	Posted: 10/8/2017 12:51:05 AM EDT [#41] Attached File Attached File Attached File Attached File A few different configs for the SBR .22
	Ever see a lion after he eats a zebra? - MrClean4Hire (RIP Brother) I hate waiting, but I really hate waiting to wait. - sgtgeo (having to wait on a Form 3 before sending a Form 4).

Ajackz Joined Mar 2010 Posts 45 EE 100% (7) TN, USA	Posted: 10/18/2017 3:41:50 PM EDT [#42] Quote History Originally Posted By CaptShiess: Just swapped my stock to the Troy. I’ve probably spent way too much on this .22 but it works great for my little kids. Functions 100%! http://i63.tinypic.com/2vd5rtc.jpg http://i68.tinypic.com/fxqsyf.jpg View Quote HAWT.... My kid saw this and loved it. As did I.

Rick_A Joined Mar 2008 Posts 5165 EE 0% (0) FL, USA	Posted: 10/19/2017 12:29:23 AM EDT [#43] Added an AFG some time back. 20170603_082756 by Slick_Rick77, on Flickr

Andielouroo Better Call Saul! Joined Jun 2006 Posts 5078 EE 100% (62) NV, USA	Posted: 11/4/2017 12:38:43 AM EDT [Last Edit: Andielouroo] [#44] Just finished. CMMG bolt and 4.5” barrel, MI handguard, SSA-E trigger, PSA minilith can. Taking it out for a test run tomorrow.

transam7969 Joined Nov 2009 Posts 728 EE 0% (0) TX, USA	Posted: 11/5/2017 2:07:36 PM EDT [#45]

Andielouroo Better Call Saul! Joined Jun 2006 Posts 5087 EE 100% (62) NV, USA	Posted: 11/5/2017 9:33:23 PM EDT [#46] Quote History Originally Posted By Andielouroo: Just finished. CMMG bolt and 4.5” barrel, MI handguard, SSA-E trigger, PSA minilith can. Taking it out for a test run tomorrow. http://i65.tinypic.com/28i6fet.jpg View Quote Shot it today and it ran perfectly! Not sure why I waited so long to build one of these.

swampfoxoutdoors

Member

Joined Feb 2015
Posts 1280
EE 100% (101)

GA, USA

Posted: 11/6/2017 1:50:00 PM EDT

[Last Edit: swampfoxoutdoors] [#47]

I guess I should post some pics of mine here.

I have it mounted on my SBR pending lower now. Going to be assembling a dedicated lower today or one day this week.

With Spectre II

Attached File

Did some late night shooting in the back yard the other day. Here is a pic from that.

With Dead Air MASK

Attached File

CMMG bolt & barrel kit with 4.5" barrel
CMMG dust cover and deflector.
Boonie Packer A Better Mag adapter
Vortex Spark AR
7" Live Free Armory BLEM rail
TLR3

Soon to be added.
Folding LAW clone adpter
Magpul K grip

Has ran 100% with CCI SV, Winchester Western bulk, Winchester M-22 Subsonic.
Runs about 95% with Aguila Standard velocity
Aguila Subsonic was 100% unreliable.

WTFShane Joined Oct 2011 Posts 1390 EE 100% (69) HI, USA	Posted: 11/19/2017 11:12:15 PM EDT [#48] I pieced together a MK12 Mod H upper using the Compass Lake Engineering 22LR kit.

swampfoxoutdoors Member Joined Feb 2015 Posts 1364 EE 100% (101) GA, USA	Posted: 11/29/2017 11:40:46 PM EDT [Last Edit: swampfoxoutdoors] [#49] Now with a folding brace. I can not wait for this stamp to return back. It’s also cycling Aguila subs 100% since installing the JP Yellow reduced power spring kit. Attached File Attached File

Spankyham Member Joined Apr 2015 Posts 326 EE 100% (3) GA, USA	Posted: 12/3/2017 11:55:26 AM EDT [#50] Attached File

Official 22LR setup pictures thread !! (Page 42 of 51)

AR-15 » Rimfire and Pistol Calibers

AR Sponsor:

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us