Looking for some help on a 10.5 inch upper

AR-15 » AR Pistols

AR Sponsor:

Site Notices

2024's Favorite CCW? | PSA Micro Dagger

[ARCHIVED THREAD] - Looking for some help on a 10.5 inch upper

Posted: 10/19/2017 9:58:22 PM EDT

Im looking to pick up a 10.5 inch upper and I was hoping to find one that is reliable and doesn't break the bank.

I was deciding between...
Aero Precision
PSA
Hardened Arms
Bear Creek

How would you rate these or any other recommendations in the under 500 category It doesn't need to come with a BCG I already have one?

Posted: 10/19/2017 10:09:34 PM EDT

[#1]

I picked up a Ghost Firearms 10.5 upper from primary arms a month ago. I am very pleased with the build quality and fit and finish....I went over every inch of it. I have about 300 rounds thru it, 100% function with good strong brass ejection. It was only 230 bucks (no bcg/charging handle). The only thing I did was dimple the barrel and loctite the set screws on the gas block.

Posted: 10/19/2017 10:42:28 PM EDT

[#2]

Cant go wrong with Aero Precision. Out of the group you listed they would be my choice. I have built well over 200 rifles on their uppers and lower and their barrels are an outstanding value. PSA would be my second choice. Hope this helps.

Posted: 10/19/2017 11:57:46 PM EDT

[#3]

Can’t go wrong with Aero or PSA, both have served me well. I would also look into Andro Corp if you are open to suggestions.

Posted: 10/30/2017 10:47:45 AM EDT

[#4]

Check out Sota Arms for an inexpensive upper. I paid $250 for a 300BO 10 inch upper that comes with BCG and charging handle. Always nice to have a spare BCG.

Posted: 10/30/2017 11:10:43 AM EDT

[#5]

Quote History

Quoted:
I picked up a Ghost Firearms 10.5 upper from primary arms a month ago. I am very pleased with the build quality and fit and finish....I went over every inch of it. I have about 300 rounds thru it, 100% function with good strong brass ejection. It was only 230 bucks (no bcg/charging handle). The only thing I did was dimple the barrel and loctite the set screws on the gas block.

View Quote

I have the same upper and it's been 100%.
Really nice fit and finish.i also opted for thr adjustable gas block for suppressor use.

Posted: 10/30/2017 5:12:02 PM EDT

[#6]

I got the PSA 10.5 for $169 shot it today ran great with a carbine buffer

Posted: 11/2/2017 4:45:34 PM EDT

[#7]

Quote History

Quoted:
I got the PSA 10.5 for $169 shot it today ran great with a carbine buffer

View Quote

Got the PSA 10.5 as well...any recommendations for optics?

Posted: 11/2/2017 7:10:55 PM EDT

[#8]

Another vote for Andro give Jason a call

Posted: 11/2/2017 8:14:58 PM EDT

[#9]

I just went with an Andro

Posted: 11/2/2017 8:28:01 PM EDT

[#10]

Quote History

Quoted:

Got the PSA 10.5 as well...any recommendations for optics?

View Quote

Same as anything else. TRS-25 or PA 50k Micro if looking for cheap. Vortex is good too.

PRO or MRO if you're looking to spend some dough.

I've had that upper and just put a TRS on it.

Posted: 11/8/2017 10:21:45 PM EDT

[#11]

LMT
Proper gas port and chamber. Slightly heavier profile and very accurate.
Have had several and shot mine today.

Posted: 11/13/2017 9:56:41 AM EDT

[#12]

I have a 10.5" Palmetto, the Chrome Lined one, A2 profile, not hammer forged but just basic Chrome. Using a Palmetto Milspec bolt. I've had the gun for a little over two years now. I've shot about 2800 rounds through it. Not as many as some folks obviously but I've never had a problem, it just runs, from day one. I think I paid $189 for it plus bolt carrier and charging handle. Pretty damn hard to beat for the money.

Posted: 11/13/2017 10:11:50 AM EDT

[#13]

I have the psa 10.5 and it runs 100%, I also had the 8.5” before I got the 10.5” and that ran fine as well.

Posted: 11/14/2017 6:16:52 PM EDT

[#14]

Quote History

Quoted:
I just went with an Andro

View Quote

I have an Andro 10.5 that i bought last year, the fit and finish is very nice. I havent shot it much (about 50 rounds) which is why i decided to put the complete upper on the EE the other day...shoot me a pm if interested.

A friend of mine also bought an Andro upper and it has ran flawlessly as well.

Posted: 11/19/2017 12:06:14 AM EDT

[#15]

Just did a build on a PSA 10.5 today and it is running great so far at 100rds silver bear. I have a carbine buffer and full auto bcg.

[ARCHIVED THREAD] - Looking for some help on a 10.5 inch upper

AR-15 » AR Pistols

AR Sponsor:

Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us