Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 2/7/2006 11:42:35 AM EDT
Here is my work in progress. I still need to cut the ff tube an inch or so, almost done..



Same shot in B & W



Gene
Link Posted: 2/7/2006 12:04:20 PM EDT
how long is the bbl.?
Link Posted: 2/7/2006 12:13:51 PM EDT
Are you going to cut it before or after the slots?
Link Posted: 2/7/2006 12:43:13 PM EDT
Keep it long it looks bad ass!
Link Posted: 2/7/2006 12:50:01 PM EDT

Originally Posted By joe1972:
Keep it long it looks bad ass!


+1
Link Posted: 2/7/2006 2:55:26 PM EDT
The barrel is 10.5", the ff tube is 12", (which is actually 12.5"). I have a Levang Linear Comp in the mail, once it arrives, I'll see how much I need to "trim" off the end of the tube.

My thinking is that after I install this, I'll only need to trim the tube back about a 1/4 inch or so from the end of the compensator (1/2 to 3/4 off the tube itself). What do you think?


I do like the look of the long tube. I was going to use a Armalite fiberglass ff tube with my custom rope work around it, but since I'm going to have to cut it down, I switched to the aluminium ff tube. Still a work in progress though, so who knows where it will go. I might even put a jagged edge on the ff tube if I can cut it to look nice...


Gene
Link Posted: 2/8/2006 3:22:32 PM EDT
VERY NICE.

this is AR pornography at it's best.
Link Posted: 2/9/2006 4:51:37 AM EDT

Originally Posted By GENESMITH:
The barrel is 10.5", the ff tube is 12", (which is actually 12.5"). I have a Levang Linear Comp in the mail, once it arrives, I'll see how much I need to "trim" off the end of the tube.

My thinking is that after I install this, I'll only need to trim the tube back about a 1/4 inch or so from the end of the compensator (1/2 to 3/4 off the tube itself). What do you think?
img.villagephotos.com/p/2005-12/1127179/LEVANGLINEARCOMPENSATOR.jpg

I do like the look of the long tube. I was going to use a Armalite fiberglass ff tube with my custom rope work around it, but since I'm going to have to cut it down, I switched to the aluminium ff tube. Still a work in progress though, so who knows where it will go. I might even put a jagged edge on the ff tube if I can cut it to look nice...


Gene





hey could you do me a favor? when you get the levang, can you put it right next to a regular flash hider.....
I am trying to get a since of the size of it for a SBR build......... I am trying to use it on a XM607 instead
of the fake moderator.
Link Posted: 2/9/2006 11:17:22 AM EDT

Originally Posted By rogue007:

Originally Posted By GENESMITH:
The barrel is 10.5", the ff tube is 12", (which is actually 12.5"). I have a Levang Linear Comp in the mail, once it arrives, I'll see how much I need to "trim" off the end of the tube.

My thinking is that after I install this, I'll only need to trim the tube back about a 1/4 inch or so from the end of the compensator (1/2 to 3/4 off the tube itself). What do you think?
img.villagephotos.com/p/2005-12/1127179/LEVANGLINEARCOMPENSATOR.jpg

I do like the look of the long tube. I was going to use a Armalite fiberglass ff tube with my custom rope work around it, but since I'm going to have to cut it down, I switched to the aluminium ff tube. Still a work in progress though, so who knows where it will go. I might even put a jagged edge on the ff tube if I can cut it to look nice...


No problem. I had a hard time finding any info about this thing. I think Brownells gives a measuremet, but it would have been nice to see a side by side comparrison. I'll post a few pics for you when it arrives. Of course pics of it installed will follow soon after.

Gene


Gene





hey could you do me a favor? when you get the levang, can you put it right next to a regular flash hider.....
I am trying to get a since of the size of it for a SBR build......... I am trying to use it on a XM607 instead
of the fake moderator.

Link Posted: 2/13/2006 4:05:44 AM EDT
This and a couple more are posted here in the AR Discussion forum, but I figured I'd post one here too since this is where it all started. I owe a really big thanks to 1IV for the inspiration and answering all my questions.



And as promised, here are pics of the levang comp with a A2 FH (also posted here in the AR Discussion Forum)



Gene
Link Posted: 2/13/2006 10:02:15 AM EDT
[Last Edit: 2/13/2006 10:24:46 AM EDT by wittzo]

Originally Posted By GENESMITH:
This and a couple more are posted here in the AR Discussion forum, but I figured I'd post one here too since this is where it all started. I owe a really big thanks to 1IV for the inspiration and answering all my questions.

img.villagephotos.com/p/2005-12/1127179/EVILPISTOL-1.jpg
Gene



Now at's one Orky lookin' Blasta, more Dakka! All ye needs are some Orky 'glyph markings and some teef hangin' off it. What the Hell are you talking about wittzo?!? I'll show you....

'Ere's a coupla boyz wiff a drum, a Shrike upper, and a real cool ring side sling adapter and a toofy glyph.


'Ere's a coupla boyz wif paracord wrapped 'round their free float tubes and a boy wif a drum (a drumma boy?).


But really it would be cool to dress mine up like one of these so it wouldn't look so humdrum. It's just a plain ole Model 1 7" upper with a Model 1 pistol buffer..Nowhere as cool looking as yours.
Link Posted: 2/14/2006 7:18:55 AM EDT
Too GENESMITH,Awesome build man thats bad @#!h and a Black rifle fan to boothe,I cant paint to save my @#!,lolh and later.
Top Top