Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/7/2006 11:12:32 PM EDT
[Last Edit: 3/7/2006 11:14:29 PM EDT by Green0]
I need to know if a suppressor would fit under the Samson rail.

Also [dependent on this being 1.375 or better] if anyone has a 9inch SAMSON MRFS for sale [used] shoot me an IM.
Link Posted: 3/8/2006 9:32:27 AM EDT
I have one of the first Samson MRFS-MX (10") models. Someone asked me what the inside diameter was when I did the initial review, and looking back at that thread I measured the shortest inside diameter @ ~1.360-1.365" using a caliper. Looks like you might need to go 1.25" diameter suppressor or smaller.
Link Posted: 3/8/2006 12:14:37 PM EDT
Thanks for the info.

I spoke to the owner of Samson and he mentioned that for additional cost they can open a few inches of the rail system, but not the entire rail, so for that it's either turn my can or try something crazy with a drill press and a 1 3/8 HSS hole cut saw with a long bit extension. I think turning is the best idea of those. I'm not sure I like the idea of reducing .060 wall to .050 wall thickness either.
Top Top