Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 2/21/2006 8:46:05 AM EDT
[Last Edit: 2/21/2006 8:56:55 AM EDT by eWRXshun]
anybody make a complete upper with a 5.56 chamber, 1/8 twist...

looking for an M4 barrel w/ true extension and upper matching the ramps, 14.7" long w/ perm attached A2 FH?
Link Posted: 2/21/2006 9:25:54 AM EDT
1/8 twist is used in match barrels primarily. Just get a 1/7 there is no real advantage to a 1/8 twist with a NATO chamber. Match barrels do not use NATO chambers because it harms accuracy. I suggest dropping the 1/8 twist idea. It gains nothing over 1/7 NATO barrels or 1/8 match barrels.
Link Posted: 2/21/2006 2:31:45 PM EDT
dont think there is much readily available 1x8 with 5.56 chamber and m4 ramps being 14.7 long

either look for something else or go custom
Link Posted: 2/21/2006 3:11:54 PM EDT

Originally Posted By eklikwhoa:
dont think there is much readily available 1x8 with 5.56 chamber and m4 ramps being 14.7 long
either look for something else or go custom



Check with Wes of MSTN for a Lilja in 1:8 SS (with M4 ramps) and a 5.56MM Wylder chamber.
Top Top