User Panel
Originally Posted By alpharph: Nice paint job! Thanks! Works great in my neck of the woods! |
|
|
Originally Posted By Claytonhoneyberry: What brand AR10 is that? I wasn't aware of an AR10 platform that takes AR15 handguards. View Quote View All Quotes View All Quotes Originally Posted By Claytonhoneyberry: Originally Posted By Daggertt: Originally Posted By cdholmes: I need some motivation. Post up some mini recces with BCM MCMRs. https://www.ar15.com/media/mediaFiles/435611/20220718_202737_jpg-2787380.JPG What brand AR10 is that? I wasn't aware of an AR10 platform that takes AR15 handguards. It's not a Mini Recce, so forgive me, but here's a 16" Rogue with an AR15 URX rail Attached File Next to a 14.5" AR15 with the same rail and the 12.5" Rogue with the POF rail it came with. Attached File |
|
|
|
|
|
Picked up a Steiner 2.5-15. Seems pretty sweet so far. Not sure I’ll stick with this scope height. Bipod and light not mounted in this picture.
Attached File |
|
|
|
|
|
|
|
|
Originally Posted By jsxtreme: https://i.imgur.com/bSkFgVF.jpg View Quote @jsxtreme Please tell me you call that one "Long John" She's a beaut. |
|
|
Cold air plus hot sun equals lots of mirage. Wasn't my best day today. Average groups where around 1.4 moa
Spent a lot of the day playing with the gas block on the 12.5 to get the explorr running right Best group of the day Attached File Found this scared little dude. Helped him cross the range to the water. Attached File Saw a fox On a side note, there wasn't tons of mirage on my last trip And my groups still were not great. This particular batch of black hills red box 77's seems to be less consistent than normal |
|
|
|
|
|
8.5 inch 300 blackout. Kind of a Johnny Noveske inspired setup.what kind distances are you guys taking your 300 minis out to?
Attached File |
|
|
I do 200 yards with my 10.3 very regularly with just a T2.That's as far as I can shoot, and the holds aren't bad at all.
|
|
|
ETA: Disregard, I can’t read.
|
|
|
Originally Posted By bzugger: 8.5 inch 300 blackout. Kind of a Johnny Noveske inspired setup.what kind distances are you guys taking your 300 minis out to? https://www.ar15.com/media/mediaFiles/334772/20230428_192143_copy_2906x1857_jpg-2799157.JPG View Quote 600-700 with an 11.3" and 125 Nosler BT's. 600 was very consistent 700 it got weird. |
|
|
12.5 Triarc
MI Nitefighter rail Lantac BCG NF 2.5-20 NX8 Harris bipod Just waiting on getting an RMR on top for passive aiming. Not pictured is my Clip-On thermal that pairs nicely with the NX8 Attached File |
|
They want to make everything a right vs left issue. The more we fight each other, the less likely we'll fight collectively against the source.
|
@Nyktos What is the weight sans laser?
|
|
|
|
|
|
Originally Posted By WUPHF: Swapped handguards on the mini 6 ARC. https://www.ar15.com/media/mediaFiles/294984/E438C614-F2AF-44FC-A3F4-8FABDC55FA06_jpe-2803185.JPG View Quote ETA how large is RIS III in hand? It looks like a chonk in that picture. |
|
|
Originally Posted By 135Patriots: That must be a hammer. 6 ARC seems like a winner on paper for a mini...hopefully it gains traction and doesn't turn into 224 valkyrie. ETA how large is RIS III in hand? It looks like a chonk in that picture. View Quote View All Quotes View All Quotes Originally Posted By 135Patriots: Originally Posted By WUPHF: Swapped handguards on the mini 6 ARC. https://www.ar15.com/media/mediaFiles/294984/E438C614-F2AF-44FC-A3F4-8FABDC55FA06_jpe-2803185.JPG ETA how large is RIS III in hand? It looks like a chonk in that picture. I’d say roughly equivalent to a URX4. I can get some OD measurements when I get home to compare. It’s less chunky than the PRI. |
|
|
Originally Posted By WUPHF: Swapped handguards on the mini 6 ARC. https://www.ar15.com/media/mediaFiles/294984/E438C614-F2AF-44FC-A3F4-8FABDC55FA06_jpe-2803185.JPG View Quote This rustles my jimmies. Earth yellow? What's the roll pin in the backstrap for? |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
|
Originally Posted By PistoleroJesse: Worn out Miad fix? View Quote View All Quotes View All Quotes Originally Posted By PistoleroJesse: Originally Posted By SecretSquirell: This rustles my jimmies. Earth yellow? What's the roll pin in the backstrap for? Worn out Miad fix? Broke the rear tab on the backstrap that locks it in place while doing prep work. Took a book from the old MIADs which used a roll pin for the backstrap, just didn’t have one on hand small enough to make it less noticeable. And it’s RAL 8000. Colors look a bit off due to lighting. |
|
|
Originally Posted By WUPHF: Broke the rear tab on the backstrap that locks it in place while doing prep work. Took a book from the old MIADs which used a roll pin for the backstrap, just didn’t have one on hand small enough to make it less noticeable. And it’s RAL 8000. Colors look a bit off due to lighting. View Quote View All Quotes View All Quotes Originally Posted By WUPHF: Originally Posted By PistoleroJesse: Originally Posted By SecretSquirell: This rustles my jimmies. Earth yellow? What's the roll pin in the backstrap for? Worn out Miad fix? Broke the rear tab on the backstrap that locks it in place while doing prep work. Took a book from the old MIADs which used a roll pin for the backstrap, just didn’t have one on hand small enough to make it less noticeable. And it’s RAL 8000. Colors look a bit off due to lighting. If it works, it ain't stupid. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
|
|
Originally Posted By SecretSquirell: If it works, it ain't stupid. View Quote View All Quotes View All Quotes Originally Posted By SecretSquirell: Originally Posted By WUPHF: Originally Posted By PistoleroJesse: Originally Posted By SecretSquirell: This rustles my jimmies. Earth yellow? What's the roll pin in the backstrap for? Worn out Miad fix? Broke the rear tab on the backstrap that locks it in place while doing prep work. Took a book from the old MIADs which used a roll pin for the backstrap, just didn’t have one on hand small enough to make it less noticeable. And it’s RAL 8000. Colors look a bit off due to lighting. If it works, it ain't stupid. One of my life’s mottos |
|
|
|
Shot the new FCD 14.5” a little today. Got the suppressed version and it’s gassed really well. Even better than the Core series.
Attached File |
|
IG: jsm5092
https://youtube.com/@justsomedude556 |
Double tap
|
|
IG: jsm5092
https://youtube.com/@justsomedude556 |
Originally Posted By Maack: Shot the new FCD 14.5” a little today. Got the suppressed version and it’s gassed really well. Even better than the Core series. https://www.ar15.com/media/mediaFiles/283216/IMG_2186_jpeg-2806923.JPG View Quote Sweet paint job |
|
|
I was able to get my hands on a Badger 1.7 mount, albeit from a local shop. It works well on the 14.5 inch upper.
Badger Mount by James H., on Flickr |
|
|
|
IG: jsm5092
https://youtube.com/@justsomedude556 |
Originally Posted By StealthGuy: https://i.imgur.com/QBP467T.jpg View Quote Is your badger a 1.7 or a 1.54? |
|
IG: jsm5092
https://youtube.com/@justsomedude556 |
|
Originally Posted By jmh556: I was able to get my hands on a Badger 1.7 mount, albeit from a local shop. It works well on the 14.5 inch upper. https://live.staticflickr.com/65535/52873718495_9e652ef051_c.jpgBadger Mount by James H., on Flickr View Quote About to have my tango6T in 1.70” badger mount myself… only question is to run the DPP on the j-arm or the spare holosun on a 45° KAC mount? Ps, going on my 13.7” mod2 mini recce |
|
|
Originally Posted By 5L33P3R: About to have my tango6T in 1.70” badger mount myself… only question is to run the DPP on the j-arm or the spare holosun on a 45° KAC mount? Ps, going on my 13.7” mod2 mini recce View Quote I haven't been able to find any accessories in stock to even mount an offset or piggy back sight. If and when I do mount an additional optic, I would most likely go with the 45* offset J-Arm and use a spare RMR that I have on hand. |
|
|
Badger has/had stuff in stock on their website very recently
|
|
|
Originally Posted By jmh556: I haven't been able to find any accessories in stock to even mount an offset or piggy back sight. If and when I do mount an additional optic, I would most likely go with the 45* offset J-Arm and use a spare RMR that I have on hand. View Quote @jmh556 Rooftop defense has 2 fde j arm and rmr mount in stock. |
|
|
Thanks for the heads up, I was just looking at other sites that I normally use and all were out of stock. I'll check this out.
|
|
|
|
|
Originally Posted By -KentuckyWindage-: https://i.imgur.com/xLK12W7.jpg View Quote Sl-k is the best sl stock |
|
|
View Quote Put the credo on it... |
|
|
|
|
|
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.