Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 4/11/2006 5:15:56 PM EDT
Saved from the archive:

1990

ST 0016xx, CM forge code, raised mag fence lower, large (.312) pivot, no weep hole, no sear block, std FCG, SPORTER bolt carrier, marked COLT’S FIREARM DIVISION, barrel stamped C MP 5.56 NATO 1/7

ST 001XXX CM forge code, mag fenced lower, big pivot pin, no sear block, marked COLT’S FIREARMS DIVISION (this one has a FA carrier, bayonet lug, and tear drop forward assist, maybe replacement parts?)

GS 010173 CM forge code, slab side lower, no sear block, small hammer/trigger pins, marked COLT'S MFG CO. INC,

ST 004600 and up have large trigger/hammer pins

ST 005293 CM forge code, mag fenced lower, big pivot pin, no weep hole, sear block pinned on both sides, large hammer/trigger pins, marked COLT'S MFG CO. INC

1991

ST 007XX1 CM forge code, mag fenced lower, big pivot pin, no weep hole, no sear block, large hammer/trigger pins, marked COLT'S MFG CO. INC, barrel marked C MP 5.56 NATO 1/7, puchased new in fall of 1991

ST 008361 mag fenced lower, big pivot pin, no weep hole, sear block pinned in on both sides, marked COLT'S MFG CO. INC, this a M4gery conversion painted black

1992

ST 009999 mag fenced lower, big pivot pin

ST 010254 CM upper forge code, slab side lower, roll marked COLT'S MFG CO. INC, sear block pinned in on right side

1993 - Sept 94

ST 017XX9 mag fenced lower, small pivot pin hole, weep hole drilled, marked COLT'S MFG CO. INC., sear block pinned in on right side, this is lower only

ST 01776X CM upper forge code, mag fenced lower, small pivot pin hole, weep hole drilled, marked COLT'S MFG CO. INC., sear block pinned in on right side, SPORTER bolt carrier

ST 025289 CMB upper forge code, mag fenced lower, small pivot pin hole, weep hole drilled, marked COLT'S MFG CO. INC., sear block pinned in on right side, SPORTER bolt carrier, blue extractor buffer

ST 026376 CMB upper forge code, mag fenced lower, small pivot pin hole, weep hole drilled, marked COLT'S MFG CO. INC., sear block pinned in on right side, SPORTER bolt carrier, blue extractor buffer (purchased the summer of 94)

ST 0287XX CMB upper forge code, mag fenced lower, small pivot pin hole, weep hole drilled, marked COLT'S MFG CO. INC., sear block pinned in on right side, SPORTER bolt carrier, blue extractor buffer (purchased new in September or October 1994)

ST 0289XX CMB upper forge code, mag fenced lower, small pivot pin hole, weep hole drilled, marked COLT'S MFG CO. INC., sear block pinned in on right side

ST 033670 mag fenced lower, small pivot pin hole, weep hole not drilled, marked COLT'S MFG CO. INC., sear block pinned in on both sides

ST 0354XX CMB upper forge code, mag fenced lower, small pivot pin hole, weep hole not drilled, marked COLT'S MFG CO. INC., sear block pinned in on both sides

Sept 94 on (bare muzzle, and SPORTER roll markd changed to MATCH TARGET from this point)

CST 003783 CMB upper forge code, mag fenced lower, small pivot pin hole, weep hole drilled? marked COLT'S MFG CO. INC., sear block pinned in on both sides

CST 0XXXXX black finish, does not appear to have a pinned in sear block
Top Top