Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/5/2006 6:05:25 PM EDT
[Last Edit: 3/5/2006 7:37:45 PM EDT by Armson-Oeg]
I just purchased a CMT/Stag M4 6 pos stock and noticed that when fully closed, it is about 3/4" out from the Tube Rear end. My question is: Do RRA stocks close all the way(meaning stock and tube flush)Rear end of tube? Second question Are RRA stock Bodies (Stock Only)end to end longer, shorter or the same length as a CMT, Bush, Colt


hope this make sense

G
Link Posted: 3/5/2006 7:02:11 PM EDT
Are you planning on replacing the CMT with an RRA (stock)?



TS
Link Posted: 3/5/2006 7:08:01 PM EDT
Normal.
Link Posted: 3/5/2006 7:21:43 PM EDT
I just checked both of RRA/M4-style stocks. Both stop at about 1/4 inch shy of the castle nut. My Vltor tags up with the castle nut.


TS
Link Posted: 3/5/2006 7:34:48 PM EDT
Ok i edited my post...... Im concernd with the butt of the stock when closed sticks out from the Rear end of the tube

"Are you planning on replacing the CMT with an RRA (stock)?"


Yes, i may choose a different stock, as i need it as short as possible

Thanks
Link Posted: 3/5/2006 7:47:11 PM EDT
If you want one as short as possible, get a Vltor. Extended all the way it is A1 length of pull instead of A2 LOP. The actual plastic stock is about 1/4" shorter than the RRA style, plus it colapses more. There may be one shorter, but none that I know of.


TS
Link Posted: 3/5/2006 8:02:47 PM EDT
[Last Edit: 3/5/2006 8:03:42 PM EDT by Armson-Oeg]
Thanks, i have 2 Vltors and 1 CAR and like em. This build i thought id save a few bucks on a M4 and went with one of the best CMT. So i have to give this some thought on what i want to do....

Thanks guys
Top Top