Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 2/26/2006 4:11:43 PM EDT
I have two superior arms bare flat top uppers. Not sure what to do with them. Any ideas? Here is a picture of my current builds.



Thinking of replacing the HBAR's receiver with one of them but pondering just getting rid of its comp and leaving it as is. Dunno, guess looking for ideas.
Link Posted: 2/26/2006 4:14:26 PM EDT
Link Posted: 2/26/2006 4:23:15 PM EDT

Originally Posted By Stickman:
Sounds like two new builds to me....



+1
Link Posted: 2/26/2006 4:23:52 PM EDT
Or two and a half if I start messing with the HBAR as well. Man, BRD is hard on me wallet.

Any ideas for the two (and a half ) builds?
Link Posted: 2/26/2006 4:37:50 PM EDT
Send one to me and I will properly dispose of it.

Or build 2 new rifles.
Link Posted: 2/26/2006 4:46:11 PM EDT
You don’t have “extra” uppers.

You have a shortage of “lowers.”

Get sum!


P.S. You have a shortage of uppers, too.


Link Posted: 2/26/2006 4:54:33 PM EDT

Originally Posted By viator:
You don’t have “extra” uppers.

You have a shortage of “lowers.”

Get sum!


P.S. You have a shortage of uppers, too.





I have noticed that BRD is a bit like building hi po diesel trucks

Step 1. Add fuel till you smoke (uppers for this example)
Step 2. Put on a bigger turbo and exhaust so smoke goes away (lowers)
Step 3. See Step 1.

That and both are hard on me wallet
Link Posted: 2/26/2006 5:53:05 PM EDT

Originally Posted By Cyclic240B:

Originally Posted By Stickman:
Sounds like two new builds to me....



+1





+2
Link Posted: 2/26/2006 6:03:33 PM EDT
Put that H-Bar barrel on one flat top and get a rail fore-end to build up an A4 clone.
Take the A2 upper and get a GI A2 barrel for it for your A2 clone.
Then take your last flat top upper and get an M4 Dissipator barrel for it.
Link Posted: 2/26/2006 6:27:21 PM EDT

Originally Posted By Lyrch:

Originally Posted By viator:
You don’t have “extra” uppers.

You have a shortage of “lowers.”

Get sum!


P.S. You have a shortage of uppers, too.





I have noticed that BRD is a bit like building hi po diesel trucks

Step 1. Add fuel till you smoke (uppers for this example)
Step 2. Put on a bigger turbo and exhaust so smoke goes away (lowers)
Step 3. See Step 1.

That and both are hard on me wallet





I get a kick out of the guys who mention that they had an extra charging handle or delta ring that morphed into a new build.

Fully understandable.

I figured that the best way to ensure that I had sufficient spare lower parts was to buy a couple of “extra” LPKs. So I did.



Then I picked up 3 more stripped lowers.

Back to square one.


BRD is hard on the wallet, all right.

Ain't life grand!
Top Top