Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 1/27/2006 12:06:27 PM EDT
Hi!

I have a colt 6920 that I would like to replace the trigger in. I really the trigger to be honest. What are some options. $100-$250 options.

Thanks in advance.

Link Posted: 1/27/2006 1:10:13 PM EDT
I have a Colt CMT m/6700. I just now ordered a large pin JARD adj. 1-4lbs. includes hammer.
Link Posted: 1/27/2006 1:38:58 PM EDT
The McCormick drop in is one of the best. I like the two stage, straight. Its very easy to change out, you can do it yourself.
Link Posted: 1/27/2006 4:53:26 PM EDT
Where is the best place to buy them? Any special McCormick to ask for? I know AK's not AR's - sorry for these rookie questions.
Link Posted: 1/27/2006 5:28:28 PM EDT
[Last Edit: 1/27/2006 5:32:10 PM EDT by menof2amendment]
MidWayUSA has Jewel triggers on sale for $189.00 reg. $209.00 Jewel triggers are two stage only large pin (Colt) or small pin (other mfgs.). Jewell triggers are $250.00 some places. JP Enterprises is also excellent single stage trigger and can be adjusted for zero creep/zero overtravel. The JARD trigger also has these plus a sear engagement adjustment.
Link Posted: 1/27/2006 5:55:18 PM EDT
I just replaced the trigger in my 6721 with the RRA match 2 stage. I have been very happy with it so far. $105!
Link Posted: 1/27/2006 6:00:53 PM EDT
accuracy speaks makes a very good quality single stage trigger. A friend of mine let me use a gun with it installed, and it was a huge improvement over the standard. I've heard from this site that they are the most reliable of the match triggers, though I have little experience with this myself. I am not entirely sure if they make a model for the large hole trigger pins though...
Link Posted: 1/27/2006 6:05:04 PM EDT

Originally Posted By gpo1956:
I just replaced the trigger in my 6721 with the RRA match 2 stage. I have been very happy with it so far. $105!



RRA makes a large pin these days?
Link Posted: 1/27/2006 6:16:00 PM EDT

Originally Posted By menof2amendment:
I have a Colt CMT m/6700. I just now ordered a large pin JARD adj. 1-4lbs. includes hammer.



A 6920 has a small trigger pin.
Link Posted: 1/27/2006 6:26:10 PM EDT

Originally Posted By gpo1956:
I just replaced the trigger in my 6721 with the RRA match 2 stage. I have been very happy with it so far. $105!



me too

wait $105!?!?! $120 here
Link Posted: 1/27/2006 8:14:48 PM EDT

Originally Posted By terrydavis:

Originally Posted By menof2amendment:
I have a Colt CMT m/6700. I just now ordered a large pin JARD adj. 1-4lbs. includes hammer.hr


A 6920 has a small trigger pin.



Are you sure? I was under the impression all Colts had oversized pins.
Link Posted: 1/27/2006 8:26:49 PM EDT
Travis, You might try JP Enterprises. You can lower the pull quite a bit on your stock trigger with their yellow springs OR get their full package. (Springs, Anti walk pins, Lightweight hammer). Dan

P.S. How's your krink running.
Link Posted: 1/27/2006 9:49:27 PM EDT
noobie question, whats the difference bewteen single and 2 stage triggers? setting rifle up to be a carbine match and ranch rifle, what would be best?
Link Posted: 1/28/2006 2:20:38 AM EDT

Originally Posted By 4weelin:
Travis, You might try JP Enterprises. You can lower the pull quite a bit on your stock trigger with their yellow springs OR get their full package. (Springs, Anti walk pins, Lightweight hammer). Dan

P.S. How's your krink running.



Krink is running fantastic! I have another Krink in 7.62 getting built by inrange in the next two weeks. Stop by the AK side of the board and look at the SEAK III project.

My head is spinning with this trigger information. I may just send this thing to JP enterprises and have them install big or small. I always thought these newer colts were large pin.

Link Posted: 1/28/2006 4:59:31 AM EDT
JP. either the trigger or the trigger and speed hammer kit.
No idea on the JP drop in kit the sell.

6721 is large pin. as well as 6920.

Mic those pins to be sure as with most colt products you never know.
Link Posted: 2/7/2006 7:10:48 PM EDT

Originally Posted By Wooden_Pickle:

Originally Posted By terrydavis:

Originally Posted By menof2amendment:
I have a Colt CMT m/6700. I just now ordered a large pin JARD adj. 1-4lbs. includes hammer.



A 6920 has a small trigger pin.



Are you sure? I was under the impression all Colts had oversized pins.



All sporting colts and semi auto LE models now have .170 trigger/hammer pins.
Link Posted: 2/7/2006 7:24:29 PM EDT

Originally Posted By Wooden_Pickle:

Originally Posted By terrydavis:

Originally Posted By menof2amendment:
I have a Colt CMT m/6700. I just now ordered a large pin JARD adj. 1-4lbs. includes hammer.



A 6920 has a small trigger pin.



Are you sure? I was under the impression all Colts had oversized pins.



All semi-auto Colt rifles have the big pins. Just to confirm what has already been said.
Link Posted: 2/7/2006 7:39:33 PM EDT
[Last Edit: 2/7/2006 7:42:16 PM EDT by JohnTheTexican]
Talon Arms has the two stage large pin Chip McCormick triggers for $159.99 in your choice of flat or curved (they're sold out of the single stage and standard pin trggers).
Link Posted: 2/7/2006 7:50:18 PM EDT
[Last Edit: 2/7/2006 8:03:48 PM EDT by CopM4]
My advice -
Take everything out and do a little/slight polishing...
If you don't like the outcome - THEN dump the money for an after market trigger. Make sure as well you keep your stock parts in the event a new trigger breaks.

Military triggers were never designed to be competition grade.
Link Posted: 2/7/2006 8:57:43 PM EDT

Originally Posted By ASU1911:

Originally Posted By Wooden_Pickle:

Originally Posted By terrydavis:

Originally Posted By menof2amendment:
I have a Colt CMT m/6700. I just now ordered a large pin JARD adj. 1-4lbs. includes hammer.



A 6920 has a small trigger pin.



Are you sure? I was under the impression all Colts had oversized pins.



All semi-auto Colt rifles have the big pins. Just to confirm what has already been said.



Actually early 90's semi auto would have the .154 pins, I have info sheet from an armorer's class that listed years of small pin vs. larger pins. Both Pivot pins and trigger/hammer pins have changed over the years in the semi auto weapons, along with various hammers/triggers/disconectors/ bolt carriers. If the rifle was made in the last ten years, is a Colt, and is a semi auto, then it should be .170
Top Top