Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 1/3/2006 3:45:19 PM EDT
but wanted to know how hard it was to line up the gas tube and bolt with the upper reciever? The lower seems straightforward on assemply and all I have to do is find some of the right tools to do it. Anyexperience in this area or tips on assembly is much appericiated

Side Note: reason being that I have chnaged around my AR so much I have enough spare parts around that All I need to do is buy the Bolt , and full parts for a upper & lower receiver.
Link Posted: 1/3/2006 3:49:38 PM EDT
[Last Edit: 1/3/2006 3:50:12 PM EDT by Stickman]
This is kicked around a lot in the builder forum. You should check out that area as I think your questions have been answered there many times over.

Its not hard if you have the tools and ability.
Link Posted: 1/3/2006 3:52:03 PM EDT
thanks
Link Posted: 1/3/2006 4:08:55 PM EDT
Link Posted: 1/3/2006 4:40:14 PM EDT
ar15.com/forums/topic.html?b=3&f=4&t=226782

read this; the hardest part (imo) on assembling uppers is gettting the FH to line up and taking out the pins on the FSB

if the AR gas tube has been used, some CLP to loosen the grime will help too
Top Top