Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 12/13/2005 5:38:42 PM EDT
I noticed a while back that the A2 flash suppressor on my CMMG upper is very slightly off from being perfectly indexed, perhaps 2-3 degrees. Cosmetically, it's not a problem to me, but it worries me that it may be working its way loose. I can't say for sure-- it may have always been like this. Are A2 flash suppressors known to ever work themselves off?
Link Posted: 12/13/2005 5:40:52 PM EDT
It's possible. Get a new crush washer and reinstall it. Very easy to do with an action clamp or a barrel vise
Link Posted: 12/13/2005 5:43:26 PM EDT
does it have a crush washer behind it?
it's likely it just wasn't indexed very well, yet it's still tight.

if looking at it from the front (***obvious safety warning***) is the top of the FH
at about 10 or 11 o'clock?

if so, you should be able to crank it down some more to fix it.
overtightened, (1 - 2 o'clock) might need a new washer.
Link Posted: 12/13/2005 6:19:51 PM EDT
[Last Edit: 12/13/2005 6:24:20 PM EDT by SelectFire]
I wouldn't even mess with it unless it's loose.
I once was firing one of my AK's and kept missing the plastic bottle I was aiming at.Over and over.Couldn't figure it out till I looked at the muzzle and my Krink style brake was loose and rotated way to the right.SO if your AR is hitting where you aim and it doesn't bug you then blow it off I say.But it's your AR if it bugs you or is getting more loose then fix it.

<­BR>



Link Posted: 12/13/2005 6:34:53 PM EDT
Where can I order an action clamp or barrel vise? I think this is the perfect excuse to add the capability to my tools. Which is preferable for this type of job?
Link Posted: 12/13/2005 8:46:12 PM EDT
Brownells.com has AR tools.I don't know if they have the absolute best prices on them but they carry just about everything along those lines.
www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=432
Link Posted: 12/13/2005 9:31:44 PM EDT
Be very careful if you use a crescent wrench to tighten your hider.. Chrome on the wrench is harder than the steel your FH is made from.. You will scratch it or bugger it up if you arent careful.
Link Posted: 12/14/2005 4:04:36 AM EDT
[Last Edit: 12/14/2005 4:05:21 AM EDT by eklikwhoa]
it might have just been indexed slightly off.... mark the fh and bbl. and keep an eye on the marks to see if they move after shooting
Link Posted: 12/14/2005 4:10:48 AM EDT
Link Posted: 12/14/2005 8:11:15 AM EDT
What barrel is it? If it is one of the 14.7" barrels the FH is pinned and welded. Mine came ~1* off-index.
Top Top