Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 10/8/2003 7:43:55 AM EDT
with a certain upper I have the casings eject but not with much force, the don't even hit the deflector behind the ejection port, what should cure this problem? if I just leave it it seems like it would become unreliable.


I also checked my gas tube, carrier key, and extractor,the gas port is also enlarged to .08? from .067? to cure a past short stroking problem.

upper is 14.5in BM with brake and ammo used was UMC + federal xm193

thanks for any info
Link Posted: 10/8/2003 8:10:40 AM EDT
Put in a new ejector spring and see what happens. How many rounds fired in the upper?
Link Posted: 10/8/2003 8:28:46 AM EDT
[Last Edit: 10/8/2003 8:29:28 AM EDT by TWIRE]
Gas tube lined up/centered on barrel port? [url=triplebreakproducts.com/Olympic/EXring.htm] X-ring [/url]?
Link Posted: 10/8/2003 8:31:49 AM EDT
WTB new extractor spring and spring insert, only 400rds on it
Link Posted: 10/8/2003 9:02:36 AM EDT
They make a little blue pill for that. Go get checked out by a doctor!
Link Posted: 10/8/2003 9:28:38 AM EDT
Oh LMAO funny, good to know we got another fuckin comedian on the board
Link Posted: 10/8/2003 2:18:19 PM EDT
Originally Posted By AlanC556: Oh LMAO funny, good to know we got another fuckin comedian on the board
View Quote
Bushy still uses the original strength extractor spring and blue insert on all their pieces. This does cause ejection problems on some of the short barrel jobs. Go to the Wolff Gunsprings website, and get a couple of their HD extractor springs. [url]www.gunsprings.com[/url] The springs are cheap, and if it doesn't solve the problem you haven't spent much[:D]
Link Posted: 10/8/2003 2:19:23 PM EDT
[Last Edit: 10/8/2003 2:22:17 PM EDT by 69hpbt]
have you tried Viagra,,,,, Whoops, read that wrong edited because somebody beat me to it
Link Posted: 10/8/2003 4:56:20 PM EDT
He means ejectile dysfunction, I think....
Link Posted: 10/8/2003 5:40:40 PM EDT
Originally Posted By AlanC556: with a certain upper I have the casings eject but not with much force, the don't even hit the deflector behind the ejection port, what should cure this problem? if I just leave it it seems like it would become unreliable.
View Quote
I and a friend are having a similar problem. Have already changed the extractor and ejector, no go. Then I changed the entire bolt, no go. Sometimes they stovepipe, so I really need to get this figured out.
Link Posted: 10/8/2003 8:58:50 PM EDT
I had the same problem. Even after new bolts, ejectors, etc... It appears I have a rough chamber. On a local AR experts recommendation I wrapped some scotch-brite around a small dowel and chucked it in a drill. Added some oil to the scotch-brite and polished the chamber. It really shined it up. I have yet to shoot it since, but I will let you know the results.
Top Top