Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 10/5/2003 9:46:37 AM EDT
I just got a knights RAS and really like it but, the bottom panel is a little loose and slides back and forth about a 1/4 inch. I've tried replacing it with one of the side panels but it is still loose on the bottom. the side panels are always tight and snug. It's just the bottom rail panel that does this.

Are they any tricks that the RAS owners have for addressing this minor problem?
Link Posted: 10/5/2003 12:32:15 PM EDT
[Last Edit: 10/5/2003 12:38:47 PM EDT by RH33]
Are you referring to the bottom rail or the ribbed panel that covers the rail? It's normal for there to be some play side to side in the bottom rail on the M-4 RAS due to the way it mounts to the receiver. Other than that the ribbed covers should be fairly tight. Ray
Link Posted: 10/5/2003 5:17:44 PM EDT
My bottom rail fits pretty snuggly but the bottom rail cover fits a litte loose on the rail. I've tried swapping rail covers but which ever rail cover is on the bottom still slips about a 1/4 inch if pushed hard enough, it not as tight fitting as the side rail covers do
Link Posted: 10/6/2003 5:36:56 AM EDT
Have you tried putting the cover on the rail from both ends? If so and it's still loose you might have a damaged rail. Is your RAS new or used? Ray
Top Top