Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 8/11/2003 2:47:47 PM EDT
This may have been hashed out before but could not find anything on it.I was wondering why it states in the owners manual (the one I downloaded from this site) "DO NOT exchange or switch bolt assemblies from one M16A2 to another doing so may result in injury to. or death of, personnel" I got both of my AR's without instructions. I happened to do this once because while at the range I found my ejector pin missing so instead of driving 50 miles home I just switched bolts and carrier around! Was this a close call? Thanks for the help!!!

DrB.
Link Posted: 8/11/2003 2:57:05 PM EDT
As long as the head space is okay, you should be fine. The military does it all the time. If you make it a regular thing, be sure to get a set of headspace guages to always keep yourself in check and make sure you don't have kaboom. If you don't have the guages, the best thing to do is avoid swicthing them cause you never know.
Link Posted: 8/11/2003 3:02:51 PM EDT
Originally Posted By knightone: The military does it all the time. [/qutoe] No they don't - not since Vietnam. Prlblme is the bolts will wear a bit to fit the barrel. Swapping the bolt between barrels accellerates the wear - and you can get into a condition of excessive headspace. Doing it a few times isn't a big deal (especially on new bolts) but I wouldn't make a habit of it. BTW it is SPECIFICALLY warned against swapping bolts in the military manuals.
Top Top