Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Arrow Left Previous Page
Page / 3
Posted: 7/17/2003 9:41:44 AM EDT
We used to run threads like this on the board and I have not seen one in a while... I am asking,

WHAT WOULD YOU LIKE TO BUY... BUT NOBODY MAKES OR SELLS?

Some examples:

1. I want an SR-25 FF RAS (or copy)
2. I want a trigger for a semi auto AR-15 that will do SAFE/SINGLE STAGE/TWO STAGE.
3. I want an AR-10 with a CAR stock or in today's world a shorty stock that works with the AR-10.
4. 17HMR AR-15 upper

These are just three examples... What yould you like?
Link Posted: 7/17/2003 9:52:55 AM EDT
[Last Edit: 7/17/2003 9:53:13 AM EDT by longshot_va]
Flip up front sight that will co-witness on an ARMS #38S-EX Mod-L sight rail. [b]TRUE[/b] universal SureFire weapons light body. One similar to the SureFire M95 series, but with a body that can be used as a hand held flashlight as well. --LS
Link Posted: 7/17/2003 9:55:06 AM EDT
I'd like 300 Whisper Brass. With a headstamp 300 Whisper or I'd be satisfied with 300 Fireball headstamp. I'd like to see M4 Stanless barrels or more 1:8 twist barrels offered in CM. I'd like to see stanless barrels offered in teflon black matte finish. Not special order. Oh and I'd like to see a top $$$ AR15 offered in any configuration for $5!!!!! Wouldn't that be a great world!!! [beer]
Link Posted: 7/17/2003 11:49:03 AM EDT
Belt fed, lots of belt fed stuff. [:D]
Link Posted: 7/17/2003 11:50:47 AM EDT
16" chrome lined 1/7 mid-length barrel.
Link Posted: 7/17/2003 11:55:10 AM EDT
16.5" Pre-ban chrome lined 1:9 barrel for all those under the rule of the Kaliban. (Don't suggest permanently attached brakes or flash hiders)
Link Posted: 7/17/2003 11:55:57 AM EDT
Transferrable, brand NEW Colt M4 machineguns at LE prices.
Link Posted: 7/17/2003 12:05:03 PM EDT
A shorter postban stock that looks like a collapsable stock.
Link Posted: 7/17/2003 12:10:15 PM EDT
More 16" chrome-lined barrels in 1/7 twist. Mid-length, carbine-length, postban, preban, heavy, pencil. And I second Longshot-VA. Darn Colt, darn SF. Does the M95 use the 1.67" bezel of the M96 and M3-handheld? Grrr. Affordable post-ban magazines in pistol calibers which are the full length of the magazine well for conversion kits without magwell blocks.
Link Posted: 7/17/2003 12:13:50 PM EDT
A telescoping stock with storage that is like a oem stock and not as fugly as the VLTOR stock... A Rail system that is similar to the Knights but does not require to have the barrel to be taken off and is not like the Fobus.....
Link Posted: 7/17/2003 12:23:17 PM EDT
RIFLELENGTH SIR, FF RAS, or PRI FF tube for the AR10(T). There is a HUGE market for this, yet they only promise a carbine length "someday". Insane.
Link Posted: 7/17/2003 12:24:34 PM EDT
[Last Edit: 7/17/2003 12:25:49 PM EDT by ANGST]
"mid-length" 16" pre-ban barrel that will mount the bayonet.
Link Posted: 7/17/2003 12:35:02 PM EDT
1) 16" 1/7 medium weight (between HBAR and pencil) mid-length barrel that is chrome-lined or offers better longevity and reliability than chrome-lined barrels. 2) Rail system that free floats barrel, offers continuous uninterrupted top rail to 1913 spec, doesn't raise rail above receiver level, allows easy removal of lower handguard for maintenance, improves cooling of barrel over current systems and better ergonomics. Bonus points for ease of installation and minimal weight.
Link Posted: 7/17/2003 12:35:06 PM EDT
Chrome lined Ti berrel. [:P] --LS
Link Posted: 7/17/2003 12:36:40 PM EDT
a gun that shoots golden bullets [:D]
Link Posted: 7/17/2003 12:42:01 PM EDT
I wish Bushmaster would make the following barrels in 1/7 twist: 20" gov't profile 16" M4 or gov't profile and 14.5" M4 (I know they make them but they are very hard to get)
Link Posted: 7/17/2003 12:51:37 PM EDT
Originally Posted By Quarterbore: WHAT WOULD YOU LIKE TO BUY... BUT NOBODY MAKES OR SELLS? 2. I want a trigger for a semi auto AR-15 that will do SAFE/SINGLE STAGE/TWO STAGE.
View Quote
I think this would be really slick. I would buy one!
Link Posted: 7/17/2003 12:53:05 PM EDT
How about a RAS system for a heavy barrel.or does some one do one already?
Link Posted: 7/17/2003 1:19:20 PM EDT
I wish they would make this card that lets poor college students like me get everything half off! And I still couldn't afford an ACOG...
Link Posted: 7/17/2003 1:26:29 PM EDT
Phased-plasma rifle in the forty watt range CWO
Link Posted: 7/17/2003 1:27:18 PM EDT
[Last Edit: 7/17/2003 1:38:49 PM EDT by Stryfe]
Originally Posted By NAM:
Originally Posted By Quarterbore: WHAT WOULD YOU LIKE TO BUY... BUT NOBODY MAKES OR SELLS? 2. I want a trigger for a semi auto AR-15 that will do SAFE/SINGLE STAGE/TWO STAGE.
View Quote
I think this would be really slick. I would buy one!
View Quote
Didn't I just see this on the board the other day. The two stage selector was between safe, and semi. You could send the lower in and they would engrave [red]set[/red] for you. Or did that one have burst too? I would think it would be easy enough. [edited] Found it. I don't think it's what you were looking for. [url]http://www.gggaz.com/products/settrigger.php[/url] Looks a little overcomplicated for my tastes. The picture shows a full-auto marked lower, but the description doesn't say expressly that it is for FA only. It also refers to the AR15/M16.
Link Posted: 7/17/2003 1:42:23 PM EDT
Originally Posted By Stryfe: Didn't I just see this on the board the other day. The two stage selector was between safe, and semi. You could send the lower in and they would engrave [w]set[/w] for you. Or did that one have burst too? I would think it would be easy enough.
View Quote
Well, if you did, share a link...!!! The only thing like you describe is the GG&G trigger which is for the M-16. In their system, you have a SAFE SEMI and AUTO position with a SET TRIGGER in one of the positions. The Set trigger is a very light pull.... I have never seen both a 2-stage and single stage trigger combined... I have been playing with the pieces and I sure as hell know it can be done... I just don't have weeks to invest in coming up with the trigger system as someone like KAC, RRA, or Jewell who already has a good 2-stage trigger would be able to just modify theirs to work.... ....all they need to do is to make it work with a second disconect and an M16A2 selector....
Link Posted: 7/17/2003 1:52:57 PM EDT
[Last Edit: 7/18/2003 6:03:53 AM EDT by blikbok]
M4Arc: I was under the impression that the Government profile barrels were 1/7. If they aren't, I second that! More 1/7 barrels! Angst: Agreed! Vermilllion: (below) That's an idea I tossed around before. Lower the axis of the bore, give it bottom ejection, you can see into the loading port. The pump becomes the heatshield since it is surrounding the barrel.
Link Posted: 7/17/2003 1:56:06 PM EDT
Top loading shotgun like what is in the video game Halo for xbox. HK USP 10mm
Link Posted: 7/17/2003 2:07:13 PM EDT
NO FIREARMS LAWS!!![:D] except fer criminals of course!!!
Link Posted: 7/17/2003 3:35:09 PM EDT
An Ar with a FOLDING, not collapsing, stock. More Transferable lowers. RDIAS for under $500 each, LL for $300 each, excluding Tax. Water-cooled uppers for Real Long bursts from C-Mags. C-Mags for under $200. An M16 in 30-06. A Dry suppressor that does 60+ Db sound reduction. 70 wet. For those in Kali, I have this for them: A Lever Action AR15! Bolt Action M16's.
Link Posted: 7/17/2003 3:58:59 PM EDT
[b]A day-visible laser down around 530nm (green) with a mount that will attach to a FF RAS for the AR-10 and allow for accuracy adjustments. And I would like to have both the AR-10 FF RAS and laser in time for Christmas. This Christmas !![/b]
Link Posted: 7/17/2003 4:01:37 PM EDT
Colt to lower the price of their SAA to a more human level.
Link Posted: 7/17/2003 6:39:34 PM EDT
A removeable carry handle with A1 sights. Either that or another vote for more 1/7 barrels from Bushmaster, at least one in pencil thin profile. I really want one, and the Colt barrel is twice as much as a Bushmaster.
Link Posted: 7/17/2003 7:34:39 PM EDT
A laser ranging, autoadjusting, variable power red dot scope. One that would adjust for bullet drop and automagically increase the magnification so my old eyes could see the target at 200+ yards. Of course it would have to be solar powered in the daytime and operated by a solar rechargeable battery at night.
Link Posted: 7/17/2003 8:10:26 PM EDT
1. 14.5 inch light weight barrel in 1/7, chrome lined, with M4 ramps (I have one and want more). Or the Diemaco C8A1 barrels. 2. 20 inch A1 style pencil barrel in 1/7. 3. Removable carry handle with A1 rear sight and ARMS throw levers instead of thumb screws. 4. PAQ-4 or PEQ-2 IR laser with a little LED light so it could be sold to us civilians with out interference from the FDA. 5. TA-31 sized ACOG with the eye relief of a TA-11, 3.5 mag, about half the weight of the TA-31 and a quick attachment on the front for a PVS-14. 6. A Vortex or Phantom style FH with Gemtech Bi-Lock lugs that works with the M4-96D. This is what haunts my dreams. Oh to be the CEO of Colt, ITT, Trijicon, ARMS or Knights!!
Link Posted: 7/17/2003 8:21:10 PM EDT
Custom and/or Improved: Charging handles Bolt catches Mag-releases Triggers (shapes) Forward Assist Buttons Grips
Link Posted: 7/17/2003 8:31:01 PM EDT
How bout a double side rail set up for the weaver rail gas blocks that come on Armalite and Rock River rifles, preferably one that attaches to the weaver block, up though the slot in the bottom were the two allen screws run through to lock the block. With two wings coming out from the bottom, then L'ing up to place the weaver rails just higher than 3 and 9 oclock, with about 3mm of clearance between the rail mounting wing and the barrel bulge of the gas block. Holes in the wing just below the left weaver rail would allow easy access to the allen screws of the gas block. Or... How bout 16" 1 in 9 Chrome lined J&T Expeditionary Barrels that are turned down to M-4 diameter under the handguard. While I'm wishing for things, How bout an EOtech with easily changable recticles that just slide into the side and and you just close the watertight cover on the side and your done. with a wide selection or rectical types for around $30.00 to $40.00 each.
Link Posted: 7/17/2003 8:42:31 PM EDT
An M16 in 30-06.
View Quote
FA or 3 round burst?...ouch Personally, the exact M4's the military uses in semi-auto(new, not some old pre-ban) or 1000 rds of M193 or M855 ammo for $5.00[:D]
Link Posted: 7/17/2003 9:09:37 PM EDT
it looks to me like that gg&g thing is for both m16 and ar15. that thing would be great. i hate how whenever im about to invest in something i do all kinds of research, and once i decide what i want i find somthing ultra-cool that i wish i had got instead. now im not so worried about my rra wearing out, because if it does i can get the gg&g. thanks for posting that.
Link Posted: 7/18/2003 2:16:54 AM EDT
1).17 HMR upper and high cap mags 2).22 hornet upper and high cap mags 3)Variable power ACOG 4).17 HMR; windrunner/FN-Herstal Intervention/TRG-22 for the tactical removal of crows from the field.
Link Posted: 7/18/2003 5:27:19 AM EDT
Link Posted: 7/18/2003 6:24:14 AM EDT
A Heidi Klum android that is so well made that nobody could tell the difference in between the two. It would be completely programable, by me.
Link Posted: 7/18/2003 6:41:18 AM EDT
CMMG: glad someone's listening! Since you've convinced someone other than Colt to make 16" 1/7 barrels, maybe you can help me understand. What type of deal would need to be assembled to get the 1/7 barrels some of us want?
Link Posted: 7/18/2003 7:16:34 AM EDT
I'd like to see more companies offer 18" barreled uppers using the mid-length set-up. I think that would be a killer combination, and a perfect compromise between the 16" and 20" lengths. I know some "varmint" rigs are available this way, but I'm talking standard uppers...
Link Posted: 7/18/2003 7:26:00 AM EDT
An 18" upper cheaper than an SPR.
Link Posted: 7/18/2003 7:38:34 AM EDT
Originally Posted By knightone: A removeable carry handle with A1 sights.
View Quote
[url]http://www.roderuscustom.tzo.com/cgi-bin/ib3/ikonboard.cgi?act=ST;f=11;t=223[/url]
Link Posted: 7/18/2003 7:49:08 AM EDT
Originally Posted By M4arc: I wish Bushmaster would make the following barrels in 1/7 twist: 20" gov't profile 16" M4 or gov't profile and 14.5" M4 (I know they make them but they are very hard to get)
View Quote
You may also want to know that Bushmaster makes the 20" gov't profile barrels with a 1-7" twist. I called two-three weeks ago and they had them in stock. The Azalin
Link Posted: 7/18/2003 8:46:24 AM EDT
I want to be reincarnated as Mike Dillon. Barring that, I'd like to become his new, best friend.
Link Posted: 7/18/2003 8:58:44 AM EDT
A vehicle mounted Vulcan Phalanx that I can have built into the passenger side of my automobile, with ammo storage and such in the back.
Link Posted: 7/18/2003 9:07:40 AM EDT
$5 leupold scopes AR variant in .338 lapua w/ cheap brass to go along with it .223 bullets w/ miniature nuclear warheads Surplus Varget or RL-15 at $5 a lb. Any barrel combo that isn't available yet (i.e., 1/7 twist, 18" chrome lined)
Link Posted: 7/18/2003 9:51:39 AM EDT
You know guys... the goal wasn't to come up with off the wall stuff.... Some of us are actually trying to see what people would like to buy if we were to make it.... Many of the posts above are impossible and I assume everybody knows it... How about real items that someone COULD make and sell that you would buy?
Link Posted: 7/18/2003 9:57:35 AM EDT
Originally Posted By Vermilion: HK USP 10mm
View Quote
I actually have dreams about this.
Link Posted: 7/18/2003 9:59:03 AM EDT
Some of this stuff seems to be already available? Thought I had seen a post on 17HMR uppers being available? RNDEdge makes an AR variant in 338 Lapua (can't help the brass price though ...) M4 stainless or 1:8 CM - check with PacNor, they offer AR barrels, I think they have 1:8 CM. Rifle length SIR - thought it was on display at SHOT? Bolt action M-16 - seems like a paradox. What about the Tubb 2000? Lever action AR - available in UK, in 9mm only last I checked. AR with folding stock - ZM upper? day visible green laser - hmmm. Thought I saw this at SHOT as well? Green was an option, but I might be wrong. The unit that mounts on the FF RAS, projects either beam off center line to allow FS to remain in place (heck, can't think of the name to save my life, LEO/Mil only with the IR unit ....) Vehicle mounted Phalanx ... wasn't there an article on some Suburbans with at least the Mini-guns? As to my desires: I second the HK USP in 10mm Have them get rid of NFA 34, 68 and 86 ... let me buy and build what I want. More machines in my shop or a venture capitalist who enjoys guns (anyone have Mike Dillon's number? I have some ideas I want to run past him ...) Marty
Link Posted: 7/18/2003 10:04:44 AM EDT
Ok, well then how about .50 caliber rifles that use perforated cartridge cases, allowing some of the propellent gases to escape through vents in the breech of the gun to greatly reduce recoil ... much like the recoilless artillery units fielded by the military.
Link Posted: 7/18/2003 11:12:37 AM EDT
Quarterbore: back OT: I see plenty of requests for 1/7 twist, chrome-lined barrels in more barrel lengths, gas port locations, and profiles.
Arrow Left Previous Page
Page / 3
Top Top