Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 2/23/2006 6:41:02 PM EDT
I upgraded to the last firmware (JSOD), tried 3 types of media, defragged my hard drive, went from nVidia back to the Windows IDE drivers, and I'm still getting "Unspecified Recorder Error." I'm using Nero 6, Windows XP Pro SP2, AMD 3000+, 1 gig of RAM. The DVDs that I'm predominately using are RiData 16x DVD-Rs (4.7gb). I generally burn at 16x and there seems to be no real difference in the failure rate between 16x and 8x. I have also tried Staples and Imation DVDs. What generally happens is that my burner will work for a bit and then stop. Once, I burned probably 10 .ISOs (all I've been burning are .ISOs created with DVD Shrink 3.2) in a row without a failure, but I've also tried half a dozen times without success (and I don't think the images are bad, because they've not worked and then worked later). What it'll do is burn until the end, seeming like everything is ok, and then at the end it says "Unspecified Recorder Error," then "Could not perform end of Disc-at-once," then "Invalid Write State," then "Could not perform end of Disc-at-once," again, and finally "Burn process failed at 16x (22,160 KB/s)."

Any suggestions? I have not yet tried swapping it to a different computer. I lost the box to it so I don't think I can RMA it. :(

Here's my Nero log:

5C82-0010-8011-0000-1667-9368-8766

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0C - HA 1 TA 4 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC35L120AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST380817AS nvatabus Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1673S E: CDRom4
Generic DVD-ROM F: CDRom1
Generic DVD-ROM G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 446MB (456972kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.2.2006
Burn DVD Image
9:35:07 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

9:35:07 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

9:35:07 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW SOHW-1673S running

9:35:07 PM #4 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media

9:35:07 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286014 (508:00.14, 4464MB)

9:35:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

9:35:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

9:35:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:35:07 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286015 (2286015) = #2286015/508:0.15
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286015 blocks [E: LITE-ON DVDRW SOHW-1673S]
--------------------------------------------------------------

9:35:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681758720, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286015 | lead-out | 1 | 0x41 | 0x00

9:35:07 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

9:35:07 PM #12 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

9:35:07 PM #13 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.

9:35:07 PM #14 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

9:35:07 PM #15 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 8x (11,080 KB/s)

9:35:07 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:35:07 PM #17 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

9:35:07 PM #18 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

9:35:07 PM #19 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

9:35:07 PM #20 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:43:25 PM #21 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVDRW SOHW-1673S> start writing Lead-Out at LBA 2286015 (22E1BFh), length 0 blocks

9:43:25 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:43:25 PM #23 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2285999

9:43:25 PM #24 CDR -1 File ThreadedTransferInterface.cpp, Line 1937
Unspecified Recorder Error
E: LITE-ON DVDRW SOHW-1673S

9:43:25 PM #25 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once

9:43:25 PM #26 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1

9:43:25 PM #27 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
E: LITE-ON DVDRW SOHW-1673S

9:43:25 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

9:43:25 PM #29 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Top Top