Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 11/15/2003 5:13:46 PM EDT
This is the second,and final, poll I am conducting for my research project.
Please select which type of implement you use for cleaning the bore of your ar-15.

Thanks a lot,
Link Posted: 11/15/2003 8:17:49 PM EDT
Otis kit
Link Posted: 11/15/2003 8:45:07 PM EDT
USGI sectional cleaning rod.
Link Posted: 11/15/2003 8:48:51 PM EDT
Just a bore snake with a little solvent, keeps em' nice and clean.
Link Posted: 11/15/2003 8:56:14 PM EDT
Hope you get a good grade on your report.

Good luck!
Link Posted: 11/15/2003 8:58:31 PM EDT
One piece and bore guide.

Link Posted: 11/15/2003 9:04:07 PM EDT
hoppes .22 cleaning kit.
Link Posted: 11/15/2003 9:04:08 PM EDT
Sometimes I use a Boresnake, sometimes a one piece rod with a bore guide. Depends on which rifle and where I am when I'm cleaning it.
Link Posted: 11/15/2003 9:07:04 PM EDT
I use an M16 kit with an included adapter for all my brushes (of all calibers).
Link Posted: 11/15/2003 9:12:46 PM EDT
rod with powder solvent patch, then boresnake as the last thing to wipe it all out
Link Posted: 11/15/2003 9:14:53 PM EDT
Link Posted: 11/16/2003 2:24:12 PM EDT
BTT - For Sunday Crew

Thanks a lot for responding to my poll!

Link Posted: 11/16/2003 2:28:26 PM EDT
[Last Edit: 11/16/2003 2:29:28 PM EDT by Minuteman419]
Bore guide and coated rod.

Steel rods are bad ju-ju FWIW.

Link Posted: 11/16/2003 2:32:12 PM EDT
Otis kit. I think the best system made.
Link Posted: 11/16/2003 2:34:20 PM EDT
at the range or in the field..... otis

detail cleaning at home one piece rod.

Link Posted: 11/17/2003 9:19:18 AM EDT

or Dewey with guide for deep cleaning
Link Posted: 11/17/2003 9:21:46 AM EDT
Brass rod! A chrome bore doesn't need that much cleaning. Concentrate on your carrier, bolt, and barrel extention.
Link Posted: 11/17/2003 11:30:53 AM EDT
Coated steel one piece.

We had to rod our rifles when checking into the University range. Hearing that chunk-chunk-chunk as the sections joints went over the muzzle crown still makes me cringe.

The harder the better - no brass or aluminum for me. Don't want to imbed grit into the rod. They made laps out of soft materials like brass for a good reason.
Link Posted: 11/17/2003 11:51:33 AM EDT
Dewey's rods. Nothing but.
Link Posted: 11/17/2003 11:55:35 AM EDT

Link Posted: 11/17/2003 12:24:22 PM EDT
What OP said!!! I use a coated dewey rod,bore guide, and a host of other goodies from Georgia P.....
Top Top