Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Log In

A valid email is required.
Password is required.
Site Notices
3/20/2017 5:03:23 PM
Posted: 5/21/2002 4:51:21 PM EDT
OK, not really. What I did do was build my 5 yr old a S&W look alike with 1" Sch40 PVC. for $10 and a few minutes with a hacksaw and drill, you can make 2 pretty decent toy SMG's. I still need to spray paint it. There's nothing like your son telling you you're cool. I used a T for the mag well and a T to mount the pistol grip. I made it where I can take off the standard barrel and replace it with a silencer - 1.5 or 2" PVC. I've not made the "can" yet. I didn't use cement. The friction when you hammer it together keeps it together. And if you twist the pistol grip 90 degrees, you get the Sten/Sterling look, and another 90 degree twist and you get the Austen?/F1 look. Wasn't that the name of the Australian SMG with the top mounted mag? I "ventilated" the barrel shroud with a 1/4" bit for that M76/M1919 look and put a "cap" on the end of the barrel and drilled it out for the "exit hole". I should have made one of these a long time ago. I used to make them out of wood. New design - no splinters. Just remember to use your imagination. If you don't like Smith and Wesson due to the sell out, call it a Carl G from your SF/Vietnam days. I'm even thinking about putting a spring in it with a cocking handle and safety cut out ala Sten where he can at least pull back the handle and let it go. He's already asked for a scope so I had to jury rig a zero power red dot sight on it(toilet paper roll and tape). jd1
Link Posted: 5/21/2002 5:05:40 PM EDT
[Last Edit: 5/21/2002 5:10:39 PM EDT by Stormbringer]
The owen?? [img]http://www.soft.net.uk/entrinet/images/pictures2/owengun2.jpg[/img] Or the F1? [img]http://www.soft.net.uk/entrinet/images/pictures/Lithgow.GIF[/img] My Dad who was a blacksmith built me a nice M3 when I was a kid out of coke cans!! It was beautiful!! I built my son a Browning 1919 with spring loaded cocking handle and spade grips for the top of his slide tower on his play centre.
Link Posted: 5/21/2002 5:12:00 PM EDT
Yep, that's the one. I used to be able to rattle off gun names like an encyclopedia. I was just too lazy to stroll across the living room and pick up one of my reference books. I was right about the F1, though. It's the modern version. I may do an M3. It would be easy. Just use a coupler and a smaller barrel. The design today was just easy - only 1 size pipe to buy. I already have a potato cannon. Now that's a blast. Pun intended. jd1
Top Top