Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Durkin Tactical Franklin Armory
User Panel

Page / 53
Link Posted: 1/10/2020 6:13:10 PM EDT
[#1]
SAMMY-R with a nikon M-tac 3-12.

Its also .224Valk :)





Link Posted: 3/5/2020 4:12:35 AM EDT
[#2]
6.5 by J M, on Flickr
Link Posted: 3/29/2020 9:00:52 AM EDT
[#3]


Aero M5e1 6.5 Creedmoor
20" Wilson Combat Ultimate Hunter, non-threaded


I still need to get better scope mount, SLR gas block and gas tube.




Link Posted: 3/29/2020 12:15:10 PM EDT
[#4]
Attachment Attached File


Grendel build almost done. Criterion barrel, Toollcraft BCG, larue 2-stage flat and a primary arms 4-14 ACSS in an Aero mount.
Link Posted: 3/30/2020 8:26:13 AM EDT
[#5]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By dmjerrywest44:
https://live.staticflickr.com/65535/49621172256_98720d9908_h.jpg6.5 by J M, on Flickr
View Quote
@dmjerrywest44 build/rifle details?
Link Posted: 4/11/2020 10:54:55 AM EDT
[#6]
Link Posted: 4/12/2020 2:39:03 AM EDT
[#7]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Hoytem:
https://i.ibb.co/vhDSRQX/3-F4-B218-F-401-D-4698-85-AC-C82906-E42576.jpg

Krieger 22” 6.5 cm
Spikes/sharps upper an lower
Aero 15” handguard
Jp bcg
Jp silent capture spring
 geissele trigger
Slr .936 gas block
Magpul prs stock
Geissle mount
Vortex pst gen 2

View Quote


That Krieger barrel is a Hammer. I have the same one. It shoots Hornady American Gunner so well I haven’t bothered to try other Ammo in it.
Link Posted: 4/12/2020 2:19:40 PM EDT
[Last Edit: 4-9] [#8]
Some of you might of seen this on Snipershide years ago
Mega MaTen 18” 308
I did the Krylon 12 colors
Total of 24hrs to complete

I should have never got rid of it







Link Posted: 4/15/2020 10:56:59 AM EDT
[Last Edit: Yojimbo] [#9]
Here's my recently built Aero M5.  It has a 18", Nitrided, 416R Criterion Hybrid .308 barrel and the optic is a Weaver Tactical (LOW)  3-15x50mm with the EMDR reticle on a ADM 20 MOA Recon mount.  





Link Posted: 4/20/2020 10:10:18 AM EDT
[Last Edit: tac_drummer87] [#10]
Aero M5 upper and lower
Ballistic Advantage 22" 6.5 Creedmoor barrel
Superlative Adjustable Gas block
VG6 Epsilon (Soon to be replaced with a Lambda)
Midwest Industries 18" rail
Accutac SR-5 Bipod
Lantac EBCG
Elftmann AR10 Competition Trigger
JP Enterprises Silent Captured Recoil Spring
Optic is a Vortex Viper Gen I 4-16x50 FFP but im gonna sell it when I get back.
All this and then had to get ready for deployment so its sitting in my safe waiting to be shot.
Link Posted: 4/21/2020 3:20:22 PM EDT
[Last Edit: FiveO] [#11]
Got my new Vortex 5-25x54 FFP leveled and mounted on my Aero Precision 18” rifle today. This rifle shoots quarter sized groups. Can’t wait to really let her stretch her legs with this new glass.

I’ve never used a Nightforce or any of the really high end glass but I like what I’m seeing with this scope. All the features you’d want for tactical long range shooting and a solid price point.

Attachment Attached File
Link Posted: 4/21/2020 8:25:15 PM EDT
[#12]


Dryfit of a new 18” spr I’m putting together. Optic mount and other odds and ends should be here later this weekend and I’ll get it all put together and get an assembled pic up.
Link Posted: 4/23/2020 8:23:32 PM EDT
[#13]
Learned a lot since this was first assembled. Range goes out to 300 yards and I'm aching for more now. Also learned that 6x24 is a bit of a waste when I don't magnify more than 8x at 300 yards. Also learned that I love the UBR stock and want a few more.

Link Posted: 4/24/2020 10:55:57 AM EDT
[Last Edit: O3scgt] [#14]
Link Posted: 4/29/2020 7:26:32 PM EDT
[Last Edit: CheeksTac] [#15]
Just finished shaving a little over a pound off of my .308 AR10 build. It's sitting at 13lb currently.


Link Posted: 4/29/2020 9:47:08 PM EDT
[Last Edit: SuperJlarge] [#16]
One of the Valkyries



Link Posted: 5/5/2020 5:35:50 PM EDT
[#17]
Got my scope in, PST Gen II 3-15.  Stole the 1.93 Geissele mount from my Razor 1-6.  Hoping to take it to the range on Saturday.

Link Posted: 5/9/2020 2:27:56 PM EDT
[#18]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By O3scgt:
https://i.ibb.co/7vWqXck/cmt.jpg
View Quote

Now, that is a sweet rifle!

How are you liking that scope? @O3scgt

Uhh pic thread...
Attachment Attached File
Link Posted: 5/11/2020 10:49:55 AM EDT
[Last Edit: O3scgt] [#19]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Hunter879­3:

Now, that is a sweet rifle! 
How are you liking that scope? @O3scgt<­br>
Uhh pic thread...
https://www.AR15.Com/media/mediaFiles/351027/5489F8D1-CFFB-4359-A8AA-01E784A04368_jpe-1408315.JPG
View Quote



thanks and so far its great. I had a mk5 5-25 on it originally which was just too much for it and ended up swapping to a gen2 razor 3-18. while being optically good it was just a brick sitting ontop of the rifle. I ended up with this and feel its a pretty happy median as far as weight and size go.Clarity/eyebox/fov are great and with the prices these can be had for on sale these days its real hard to pass up.

Hows that n6 shoot? I was looking at them prior to purchasing my cc sr25.

to keep it a picture thread


Link Posted: 5/13/2020 12:28:04 AM EDT
[#20]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By O3scgt:



thanks and so far its ­great. I had a mk5 5-25 on it originally which was just too much f­or it and ended up swapping to a gen2 razor 3-18. while being optically good it was just a bri­ck sitting ontop of the rifle. I ended up with this and feel its a pretty h­appy median as far as weight and size go.Clarity/eyebox/fov are great and with the prices these can b­e had for on sale these days its real hard to­ pass up.

Hows that n6 shoot? I was looking at ­them prior to purchasing my cc sr25. 

to keep it a picture thread 

­https://i.ibb.co/qsgBFnX/steiner.jpg
View Quote


Awesome! Great to hear. I have a soft spot for Steiners. I had the 5-25 and it was sweet.

The N6 is sweet, but it is a fully custom build. It’s a 16 inch 6.5 Creedmoor. It’s a smooth shooter. I’m in the process of revamping it. I sent it off to get cerakoted and I’m contemplating fluting the barrel. Oh and I just got a Spuhr Mount for the Mark 5.

The end result should be pretty nice.

Pic thread...
Attachment Attached File



Link Posted: 5/13/2020 3:32:23 AM EDT
[Last Edit: RJeff21] [#21]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Hunter879­3:


Awesome! Great to hear. I have a soft spot for Steiners. I had the 5-25 and it was sweet. 

The N6 is sweet, but it is a fully c­ustom build. It’s a 16 inch 6.5 Creedmoor. It’s a smooth shooter. I’m in the process of revamping it. I sent it off to get cerakoted and I’m conte­mplating fluting the barrel. Oh and I just got a Spuhr Mount for the Mark­ 5.

The end result should be pretty nice. 

Pic thread...
https://www.AR15.Com/media/mediaFiles/351027/9C9326DE-BCDF-4076-B8CF-C1F8F531699A_jpe-1413553.JPG


View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Hunter87­93:
Originally Posted By O3scgt:



thanks and so far its ­great. I had a mk5 5-25 on it originally which was just too much f­or it and ended up swapping to a gen2 razor 3-18. while being optically good it was just a bri­ck sitting ontop of the rifle. I ended up with this and feel its a pretty h­appy median as far as weight and size go.Clarity/eyebox/fov are great and with the prices these can b­e had for on sale these days its real hard to­ pass up.

Hows that n6 shoot? I was looking at ­them prior to purchasing my cc sr25. 

to keep it a picture thread 

­https://i.ibb.co/qsgBFnX/steiner.jpg


Awesome! Great to hear. I have a soft spot for Steiners. I had the 5-25 and it was sweet. 

The N6 is sweet, but it is a fully c­ustom build. It’s a 16 inch 6.5 Creedmoor. It’s a smooth shooter. I’m in the process of revamping it. I sent it off to get cerakoted and I’m conte­mplating fluting the barrel. Oh and I just got a Spuhr Mount for the Mark­ 5.

The end result should be pretty nice. 

Pic thread...
https://www.AR15.Com/media/mediaFiles/351027/9C9326DE-BCDF-4076-B8CF-C1F8F531699A_jpe-1413553.JPG




Was that a full “custom” build or built off a complete N6 rifle?  Either way, what barrel do you have in it or who did the chop work on it?  Tossing around the idea of a 16” 6.5C and trying to come up with a good option barrel wise that won’t have an enormous gas port/any function issues.  Ultimate goal is to not have to dick around with an adjustable GB, but I know they pretty much end up being mandatory on a lot of large frame guns, especially suppressed.

@Hunter879­3
Link Posted: 5/13/2020 8:12:52 AM EDT
[Last Edit: Hunter8793] [#22]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By RJeff21:


Was that a full “custom” b­uild or built off a complete N6 rifle?  Eithe­r way, what barrel do you have in it or who d­id the chop work on it?  Tossing around the i­dea of a 16” 6.5C and trying to come up with a good option b­arrel wise that won’t have an enormous gas po­rt/any function issues.  Ultimate goal is to not have to dick around­ with an adjustable GB, but I know they prett­y much end up being mandatory on a lot of lar­ge frame guns, especially suppressed.

@Hunter879­3
View Quote

Full custom in the fact that I bought the stripped upper receiver, lower, and rail and put it all together.

The barrel is a Criterion 16 inch rifle length 6.5CM barrel.

Link the barrel

@RJeff21
Attachment Attached File

Link Posted: 5/13/2020 11:17:43 AM EDT
[#23]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Hunter879­3:

Full custom in the fact that I­ bought the stripped upper receiver, lower, a­nd rail and put it all together.

The barrel is a Criterion 16 inch rif­le length 6.5CM barrel.

Link the barrel

@RJeff21
https://www.AR15.Com/media/mediaFiles/351027/6D33060E-33CF-4184-885B-A5B166667C08_jpe-1413738.JPG
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Hunter87­93:
Originally Posted By RJeff21:


Was that a full “custom” b­uild or built off a complete N6 rifle?  Eithe­r way, what barrel do you have in it or who d­id the chop work on it?  Tossing around the i­dea of a 16” 6.5C and trying to come up with a good option b­arrel wise that won’t have an enormous gas po­rt/any function issues.  Ultimate goal is to not have to dick around­ with an adjustable GB, but I know they prett­y much end up being mandatory on a lot of lar­ge frame guns, especially suppressed.

@Hunter879­3

Full custom in the fact that I bought­ the stripped upper receiver, lower, and rail­ and put it all together.

The barrel is a Criterion 16 inch rif­le length 6.5CM barrel.

Link the barrel

@RJeff21
https://www.AR15.Com/media/mediaFiles/351027/6D33060E-33CF-4184-885B-A5B166667C08_jpe-1413738.JPG


Thanks.  Are you using adjustable gas?  
Link Posted: 5/13/2020 12:49:47 PM EDT
[#24]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By RJeff21:


Thanks.  Are you using adjustable gas?  
View Quote

Yes. I have a Superlative Arms adjustable gas block. I can also adjust the buffer weight and spring, and even the bolt carrier if I want to.

I have a JP variable mass BCG and a JP silent captured spring system.
Link Posted: 5/13/2020 1:31:54 PM EDT
[#25]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Hunter879­3:

Yes. I have a Superlative Arms adjustable gas blo­ck. I can also adjust the buffer weight and spri­ng, and even the bolt carrier if I want to.

I have a JP variable mass BCG and a J­P silent captured spring system.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Hunter87­93:
Originally Posted By RJeff21:


Thanks.  Are you using adjustable gas?  

Yes. I have a Superlative Arms adjustable gas blo­ck. I can also adjust the buffer weight and spri­ng, and even the bolt carrier if I want to.

I have a JP variable mass BCG and a J­P silent captured spring system.


Cool.  Thanks for the info.
Link Posted: 5/19/2020 4:15:05 PM EDT
[#26]
Ended up going .308 for my first large frame.  16” 6.5C is next.

Attachment Attached File
Link Posted: 5/22/2020 9:42:41 AM EDT
[Last Edit: Blackfoot_7] [#27]
Discussion ForumsJump to Quoted PostQuote History


@HaveBlue83 Outstanding.

Link Posted: 6/6/2020 8:07:35 PM EDT
[#28]
Pulled the criterion 16" mid 308 out and threw in a criterion 18" rifle length in 6.5creed. I had a bunch of 6.5 ammo left over from my bolt gun so I pulled the 308 out and used it for another project. I have an sr25 as well so having two 16" 308's wasn't necessary  

Link Posted: 6/9/2020 3:15:33 PM EDT
[#29]
What can I say, I am a sucker for FDE





Link Posted: 6/10/2020 10:44:16 PM EDT
[#30]
Mostly done.

Link Posted: 6/12/2020 3:14:54 PM EDT
[#31]
Can’t remember if I have posted this here yet. Built this after deployment a couple of years ago. Started off as a diamondback db15. Swapped out the stock for a windham weaponry A2 stock, got a 18inch faxon barrel, 15inch YHM handguard, and a YHM gas block. Right now I just have a Bushnell Banner 4to16x scope on it, but I haven’t had any issues with it. I’m able to shoot an 1” at a hundred with 55gr NATO ammo. I’m hoping I can bring that group size down with some heavier bulletsAttachment Attached File
Link Posted: 6/26/2020 6:55:13 AM EDT
[#32]




16” recce and 18” spr
Link Posted: 7/7/2020 1:17:44 PM EDT
[#33]
Attachment Attached File


currently in process of this one, I have the LPK and PRI FDE a2 stock in the mail as we speak

22" shilen 6.5 Grendel barrel
remington defense rail
triggertech trigger that I may swap out for a Geissele hi speed that's in another rifle.
aero lower and spikes upper
home done cerakote job

still need to order up a bolt, adjustable gas block, charging handle, I have a leupold mk5 3-18 I'll be putting on it or my Steiner M8xi, still undecided


Link Posted: 7/11/2020 10:57:28 AM EDT
[#34]
Link Posted: 7/19/2020 2:36:32 PM EDT
[#35]
My AR-15 I built a few years ago:

https://imgur.com/g2dxqse
Link Posted: 8/25/2020 7:11:40 PM EDT
[#36]
Link Posted: 8/25/2020 8:06:56 PM EDT
[#37]
What kind of groups are you getting out of the 13.5 mws?
Link Posted: 8/27/2020 12:10:24 PM EDT
[#38]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By glocktalk:
What kind of groups are you getting out of the 13.5 mws?
View Quote


With Match grade ammo 0.9-1.2 MOA are easily achievable if I do my part.
Link Posted: 8/28/2020 1:32:00 AM EDT
[#39]
That’s about what I was getting with mine .7-.8 with a 168smk hand load.
Link Posted: 8/30/2020 2:31:29 AM EDT
[#40]
Old school

Link Posted: 9/11/2020 2:57:21 PM EDT
[#41]
Link Posted: 9/23/2020 4:36:28 PM EDT
[#42]
Link Posted: 9/26/2020 6:00:20 PM EDT
[#43]
Link Posted: 9/29/2020 11:23:03 AM EDT
[#44]
LMT MWS

Link Posted: 9/29/2020 7:56:41 PM EDT
[#45]
What box is that I need one for my mws
Link Posted: 10/11/2020 10:55:46 PM EDT
[#46]
Stretching the legs on my 6,5CM Scar 20S.... 600yds on a 2/3 IPSC torso.

Link Posted: 11/9/2020 8:22:09 PM EDT
[#47]
Link Posted: 12/7/2020 1:24:06 PM EDT
[#48]
How do you like that barrel? I was consider one from them also.
Link Posted: 12/17/2020 3:36:05 AM EDT
[#49]
I like the brake
Link Posted: 12/18/2020 10:16:05 AM EDT
[#50]
Built my first couple AR's a few years ago and always wanted an AR-10 for hunting. I started ordering parts for this in November and finished it up last weekend. I had two goals for the build: 1) Keep the build cost under $1k for the rifle, and 2) Shoot 1 MOA or better. All in all, I spent $1059 on the build (I already had the optic, Magpul MOE stock, and one of the members here sent me a free Mil-spec trigger), I'm happy with how it shoots.

Lower:

Aero M5 Lower
Aero M5 LPK - Trigger
Trigger is Mil-spec unit a member here supplied me with
Magpul MOE stock in FDE
Aero Buffer Kit

Upper:

Aero M5 Upper
Ballistic Advantage 20" .308 Modern Series Heavy Profile Barrel
Aero BCG
Radical Firearms Ghost Flash Hider
Strike Industries C/H with Extended Latch
Aero Gas Block
Expo Arms Rifle Length Gas Tube
Samson's New SXS-762 Lightweight 18" Handguard in M-Lok
Magpul FDE M-Lok Rail Covers

Optic:

Primary Arms GLX 20 MOA Scope Mount
Vortex PST 4-16 FFP MRAD Scope

The last picture is a picture of a 3-shot group at 100 yards off the bipod with no rear bag after sighting in.

I didn't do a 'break-in' procedure on the barrel, and the group was within the first 10 shots the rifle fired. Hoping for better groups as the barrel gets more used





Page / 53
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top