User Panel
User Panel
User Panel
|
Posted: 3/24/2017 5:47:25 PM EDT
Just saw this as well. Any plans on a large frame glock lower as well?
|
|
|
|
Posted: 3/24/2017 6:20:57 PM EDT
Any plans for the colt lowers that were talked about before?
|
|
|
|
Posted: 3/24/2017 6:57:20 PM EDT
I have an older Spikes complete 9mm upper that currently sits on a Spikes lower with a now-discontinued Spikes 9mm magwell block. Will these new 9mm Glock lowers work with with the older upper?
|
|
|
|
Posted: 3/24/2017 7:33:16 PM EDT
We have a colt pattern lower as well and we do plan to offer stripped uppers, bolts, barrels, integral suppressed rifles/uppers, etc... We are full blown doing 9mm again. :-)
ETA no plans for large frame Glock right now. |
|
|
|
Posted: 3/24/2017 8:00:55 PM EDT
Large frame and DI .45 and 10mm are definitely needed. I offer to do all your prototype testing for free, I'll even pay for the ammo
|
|
|
|
Posted: 3/24/2017 9:01:44 PM EDT
Quote History Quoted:
We have a colt pattern lower as well and we do plan to offer stripped uppers, bolts, barrels, integral suppressed rifles/uppers, etc... We are full blown doing 9mm again. :-) ETA no plans for large frame Glock right now.  Large frame would be great! Grabbed a 9mm lower from aim earlier once I saw email. Will keep a look out for large frame down the road from you guys Will you be offering barrels for the MRP again and what's eta on barrel and bolts? Thanks!
|
|
|
|
Posted: 3/25/2017 2:40:33 AM EDT
No MRP stuff this time around, no eta on barrels or bolts.
|
|
|
|
Posted: 3/25/2017 12:36:42 PM EDT
Since Spikes has no eta on compatible bolts, anyone have suggestions in the meantime?
|
|
|
|
Posted: 3/25/2017 9:06:20 PM EDT
Quote History Quoted:
Since Spikes has no eta on compatible bolts, anyone have suggestions in the meantime? |
|
|
|
Posted: 3/26/2017 8:35:45 PM EDT
Quote History Quoted:
I'm running a Spinta and have never had any issues with it |
|
|
|
Posted: 3/26/2017 9:36:26 PM EDT
Quote History Quoted:
We have a colt pattern lower as well and we do plan to offer stripped uppers, bolts, barrels, integral suppressed rifles/uppers, etc... We are full blown doing 9mm again. :-) ETA no plans for large frame Glock right now. |
|
|
|
Posted: 4/15/2017 7:48:00 PM EDT
Really happy with these lowers!
|
|
|
|
Posted: 4/16/2017 1:22:51 AM EDT
Quote History Quoted:
Really happy with these lowers! http://imageshack.com/a/img923/8006/qQKhi6.jpg http://imageshack.com/a/img922/6117/FnbIzD.jpg |
|
|
|
Posted: 4/16/2017 7:36:26 PM EDT
Quote History Quoted:
Which upper ya running? Spikes? RRA? |
|
|
|
Posted: 4/17/2017 11:15:51 AM EDT
Quote History Quoted:
Really happy with these lowers! http://imageshack.com/a/img923/8006/qQKhi6.jpg http://imageshack.com/a/img922/6117/FnbIzD.jpg I got a Spikes slick side upper on the way to go with their Glock lower w/ KAK pistol kit, BA 5.5" barrel, KAK Slimline Flash Can, BCM 7" KMR-A....can't wait to build and shoot it How does the LRBHO work on these? Like it should? |
|
|
|
Posted: 4/17/2017 11:58:31 AM EDT
Quote History Quoted:
Nice! I got a Spikes slick side upper on the way to go with their Glock lower w/ KAK pistol kit, BA 5.5" barrel, KAK Slimline Flash Can, BCM 7" KMR-A....can't wait to build and shoot it How does the LRBHO work on these? Like it should? Quote HistoryQuoted:
Quoted:
Really happy with these lowers! http://imageshack.com/a/img923/8006/qQKhi6.jpg http://imageshack.com/a/img922/6117/FnbIzD.jpg I got a Spikes slick side upper on the way to go with their Glock lower w/ KAK pistol kit, BA 5.5" barrel, KAK Slimline Flash Can, BCM 7" KMR-A....can't wait to build and shoot it How does the LRBHO work on these? Like it should? |
|
|
|
Posted: 4/19/2017 11:19:00 PM EDT
Is the Mag Catch metal or polymer? about to pull the trigger on one...
|
|
|
|
Posted: 4/20/2017 5:04:24 AM EDT
Quote History Quoted:
Is the Mag Catch metal or polymer? about to pull the trigger on one... |
|
|
|
Posted: 4/20/2017 3:21:04 PM EDT
Put this guy together last night and I can't wait to finish the upper and shoot this thing.
All the parts laid out to make sure I wasn't missing anything......I was. Had to steal a buffer retaining spring and retaining plug from another gun. 
Spikes 9mm Glock Lower, KAK shockwave kit, MEGA trigger, K2 grip, BAD ambi safety, 8.0 oz 9mm extended buffer, CMC Anti Walk Pins(these will not work with the MEGA trigger. Either the pins are slightly oversize, or the trigger holes are slightly undersized. It would work with standard pins, but decided the anti walk pins were more inportanat to the build, so no MEGA trigger in it yet. Might try to open up the holes in the trigger just a bit to make them work. 
Spikes Slick Side upper, BCM Mod 3 CH, Spinta 9mm bolt 
BA 5.5" barrel 1/2x36, KAK slimline Muzzle Brake, BCM KMR-A 7", crush washer(to time the brake so the slots are at 3 & 9 - yes, I'm anal) 
Complete Lower 
Upper mock up to see how it will all look. 
Lower complete, Upper mocked up. Just need a vice and the upper will be done, hopefully by Sunday so I can shoot it. 
Manually cycling it with an empty mag did cause the bolt to lock back, so very happy about that. Will know if it really works once I get to the range. So far this has been my easiest build to date, just the 1 small annoyance with the MEGA trigger not working with the CMC pins. |
|
|
|
Posted: 4/24/2017 10:40:40 AM EDT
Quote History Quoted:
Put this guy together last night and I can't wait to finish the upper and shoot this thing. All the parts laid out to make sure I wasn't missing anything......I was. Had to steal a buffer retaining spring and retaining plug from another gun. http://i1035.photobucket.com/albums/a438/srob7001/20170419_190030.jpg Spikes 9mm Glock Lower, KAK shockwave kit, MEGA trigger, K2 grip, BAD ambi safety, 8.0 oz 9mm extended buffer, CMC Anti Walk Pins(these will not work with the MEGA trigger. Either the pins are slightly oversize, or the trigger holes are slightly undersized. It would work with standard pins, but decided the anti walk pins were more inportanat to the build, so no MEGA trigger in it yet. Might try to open up the holes in the trigger just a bit to make them work. http://i1035.photobucket.com/albums/a438/srob7001/20170419_190119.jpg Spikes Slick Side upper, BCM Mod 3 CH, Spinta 9mm bolt http://i1035.photobucket.com/albums/a438/srob7001/20170419_190056.jpg BA 5.5" barrel 1/2x36, KAK slimline Muzzle Brake, BCM KMR-A 7", crush washer(to time the brake so the slots are at 3 & 9 - yes, I'm anal) http://i1035.photobucket.com/albums/a438/srob7001/20170419_190044.jpg Complete Lower http://i1035.photobucket.com/albums/a438/srob7001/20170419_194807.jpg Upper mock up to see how it will all look. http://i1035.photobucket.com/albums/a438/srob7001/20170419_195026.jpg Lower complete, Upper mocked up. Just need a vice and the upper will be done, hopefully by Sunday so I can shoot it. http://i1035.photobucket.com/albums/a438/srob7001/20170419_195256.jpg Manually cycling it with an empty mag did cause the bolt to lock back, so very happy about that. Will know if it really works once I get to the range. So far this has been my easiest build to date, just the 1 small annoyance with the MEGA trigger not working with the CMC pins. Pleased to say I did not have a single malfunction and my bolt locked back every single time I shot the last round out of the mag. Shot 200 rounds out of the 1 ETS 31 round mag I had. This has quickly become my favorite gun, and I can't wait to get a RMR red dot and SBR this thing. |
|
|
|
Posted: 4/28/2017 7:56:29 PM EDT
Colt lowers are in stock at Aim Surplus, really wish yall didn't use the 9mm long finger bolt catch on these
|
|
|
|
Posted: 5/5/2017 5:33:16 PM EDT
Just wondering if it comes with no 'rifle' designation, so I can register it as a pistol?
|
|
|
|
Posted: 5/5/2017 7:16:14 PM EDT
The ST Glock lowers are in stock again at AIM...
https://www.aimsurplus.com/product.aspx?item=F1STLS920&name=Spike's+Tactical+9mm+Glock+Magazine+AR+Lower+Receiver&groupid=1128 |
|
|
|
Posted: 5/6/2017 12:32:56 AM EDT
Anybody know if the Colt version has LRBHO?
Thank you, Isaac |
|
|
|
Posted: 5/6/2017 7:21:12 AM EDT
Quote History Quoted:
Anybody know if the Colt version has LRBHO? Thank you, Isaac |
|
|
|
Posted: 5/6/2017 10:00:00 AM EDT
Quote History Quoted:
We have a colt pattern lower as well and we do plan to offer stripped uppers, bolts, barrels, integral suppressed rifles/uppers, etc... We are full blown doing 9mm again. :-) ETA no plans for large frame Glock right now. |
|
|
|
Posted: 5/6/2017 8:52:38 PM EDT
A dedicated upper with the forward brass deflector etc. would be pretty sweet.
|
|
|
|
Posted: 5/24/2017 9:28:21 AM EDT
Quote History Quoted:
No MRP stuff this time around, no eta on barrels or bolts. AIM has the Colt pattern lowers in stock. Spikes Forged 9mm Lower For Colt style mags $135 shipped |
|
|
|
Posted: 5/24/2017 10:55:31 AM EDT
No bolts or barrels for sale yet, soon I hope. We finally have all the .308 parts. :)
|
|
|
|
Posted: 5/24/2017 2:00:37 PM EDT
Quote History Quoted:
No bolts or barrels for sale yet, soon I hope. We finally have all the .308 parts. :) I know, I should "GET BOTH" in true AR-15 fashion!!! |
|
|
|
Posted: 5/25/2017 8:10:37 AM EDT
Yes we use one bolt for both.
|
|
|
|
Posted: 5/25/2017 8:34:41 AM EDT
Quote History Quoted: Just wondering if it comes with no 'rifle' designation, so I can register it as a pistol? |
|
|
|
Posted: 5/25/2017 11:58:24 PM EDT
Are these compatible with 40 S&W?
|
|
|
|
Posted: 5/28/2017 10:21:40 AM EDT
Quote History Quoted:
Are these compatible with 40 S&W? |
|
|
|
Posted: 6/3/2017 9:15:31 AM EDT
I'm getting the itch to get one of the Colt 9mm lowers for a new build. My question is will the Spikes slick upper work with the Colt 9mm lower and a 16in 9mm barrel? Or should I wait for the 9mm upper? I know I could get another brand upper but prefer to keep it in the family.
|
|
|
|
Posted: 6/3/2017 12:10:27 PM EDT
literally any upper will work with a 9mm build
|
|
|
|
Posted: 6/3/2017 1:21:30 PM EDT
Quote History Quoted:
literally any upper will work with a 9mm build |
|
|
|
Posted: 6/3/2017 3:17:13 PM EDT
Quote History Quoted:
That's what I was thinking. Thanks Quote HistoryQuoted:
Quoted:
literally any upper will work with a 9mm build Because the NFA has LRBHO built into it, and the Colt lower has stuff on the mag block that gets in the way. And - I found that out by not paying attention while ordering the NFA side charger thinking I'd throw it on my Spikes Glock lower which has LRBHO built into the lower - and naturally didn't fit. So I started swapping parts around to figure out what ELSE I didn't know or take into account. I have no experience or parts for a purpose built lower that has the magwell machined specifically to take Colt mags. I only have my Colt lower that came from Colt with magwall block. The easiest thing to do at that point was to order the NFA Glock lower to match the NFA sidecharger upper and stick a PSA pistol upper on the Spikes lower until Spikes gets some matching 9mm pistol uppers in stock. |
|
|
|
Posted: 6/4/2017 3:30:08 PM EDT
Recommend spring to use with your ST-9X buffer?
|
|
|
|
Posted: 6/5/2017 1:12:26 AM EDT
Quote History Quoted:
Recommend spring to use with your ST-9X buffer? ETA: And some recommend against automatically using a heavy buffer as the automatic go-to buffer because it can cause the bolt to slam home with too much force. Thats one of the reasons that KAK offers the 'KAK 9MM AR15 CONFIGURABLE BUFFER KIT' up to 10 oz, but their standard 9mm buffer is a 5.5 oz. I am not an expert, just passing along what I've read since I started this process. |
|
|
|
Posted: 6/8/2017 3:58:37 AM EDT
Y'all use to make the 9mm uppers with gas deflector and 2/3 dust cover installed. Any plans for these uppers again (please)?
|
|
|
|
Posted: 6/8/2017 11:48:42 AM EDT
Quote History Quoted:
literally any upper will work with a 9mm build |
|
|
|
Posted: 6/8/2017 11:49:15 AM EDT
We have forged ones in stock
|
|
|
|
Posted: 6/8/2017 6:37:08 PM EDT
Quote History Quoted:
We have forged ones in stock |
|
|
|
Posted: 6/9/2017 10:25:12 AM EDT
Quote History Quoted:
Which post is this referring to? If mine about the 9mm upper with deflector and cover I couldn't find on your website. |
|
|
|
Posted: 6/9/2017 11:10:45 AM EDT
Quote History Quoted:
They are not on ththe website yet |
|
|
|
Posted: 8/23/2017 6:27:47 PM EDT
Quote History Quoted:
Not on the Glock version |
|
|
|
Posted: 8/23/2017 9:19:38 PM EDT
Sometimes the linkage for the LRBHO will hit the upper, our 9mm upper has added clearance machined in that spot.
|
|
|
|
Posted: 10/1/2017 3:39:57 AM EDT
Anybody know if the Magpul Glock mags functions fine with the Spikes Glock Lower? Greatly appreciate any feedback.
|
|
|
|
Posted: 10/6/2017 12:02:06 PM EDT
Haven't shot mine yet, but the magpul and ETS mags are very hard to seat with or without the bolt locked back. The dummy rounds feed and cycle fine from the magpul mag, but the LRBHO seemed to get hung up on the second to the last dummy round in the mag. I'm running an odd-ball upper though so that may have something to do with the LRBHO catching.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2022 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
