Palmetto State Armory is pleased to anounce the release of a limited edition 18" 6.8 SPCII mid-length Stainless Steel barreled upper.

Priced at $399.95, these uppers are assembled here in our facility in SC using quality, US made, parts.  Quantity is limited, so order today.

We start with our complete A3 Flattop Upper Receiver. This forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks and mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer, and are marked with the Palmetto State Armory logo on the left side, up front, just below the rail.  Barrels are 18" mid-length, 416 Stainless steel, 6.8 SPCII chambered with a 1:11 twist and a recessed target crown.  Barrel is finished off with an F-marked front sight base, sling swivel, standard Md-length handguards, and Choice of a YHM Flash Hider or Muzzle Brake.  Bolt is made of Mil-spec Carpenter 158 steel. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is heavy profile, parkerized outside chrome lined inside, and laser engraved with the Palmetto State Armory logo.

Add a Magpul MOE Handguard for $20
Add a Magpul Magpul rear MBUS for $50
Add a Magpul MOE Handguard and rear MBUS for $70
Substitute a Troy 11" TRX Standard or Extreme Free Float Rail and Low Profile gas block for $100

Shipping: $15.00

To order please click HERE

Order has been made

very nice. great price too.

 

this is a smoking deal.

Dang it. If those Palmetto 5.56 uppers were in stock yet, I'd get one of those too.

Indeed, this has rekindled my interest in the 6.8

Ordered and waiting.

i need the upper with low profile gas block  but no hand guards,  can i get it this way?

Order the Basic model and put the preference for low profile gas block and no handguards in the special instructions at checkout with your flash hider preference.

Please call and talk to Joe Weir and he can arrange for special builds.

Thanks,
Jamin

If you were to order this with the MOE forearm and Magpul sight do you can you get them in OD or FDE

If we have the handguards in stock in those colors we could do it. For something like that, you probably need to call and ask for Joe Weir. He can make sure that we have those parts in stock and he can put your order through for you.

Well, I was too slow ordering...the option I tried to order (substitute a Troy 11" TRX Extreme Free Float Rail and Low Profile gas block for $100) was out of stock.  

Question:  Will you be making more of these 6.8 uppers wit the Troy Extreme Rail option with flash hider?

Thanks for your time answering my question.

WholeBunches

We are waiting on more of the Troy rails and we will have this option back in stock. It will probably be about 2 more weeks before we see them.

Thanks,
Jamin

Thank you.  I will monitor that item on your site and then "pounce" when it is back in stock.

ordered and waiting......

Any range reports on these yet?

Posted Via AR15.Com Mobile

It just arrived by brown...

box was tore up some...

Inside there lay's a sick looking upper!!!!

Cant wait to finish the build now.... come on parts.... I need to rock this on the range!!

Im no crack shot and i only spent about a 1/2 hour shooting tonite but ive got somewhat of a range report.

this was at 27 yards getting it on paper and the last few shots i was holding 2" high and hitting in the orange  and the squares are 1"


this was at 100 yards and i think i could do a little better if i had a nicer trigger and not a mil spec, thats my excuse anyway ive got a couple lowers with RRA 2 stage triggers in them and ill stick one of them on this upper and give a try.


SSA ammo and i need some more.


Stag lower, PRI 15 round mag, UBR, LaRue SPR-1.5 scope mount and a Mueller 3-10x44 sport dot scope

Your out of stock...when are you guys getting them back in? I sent an email contact and didn't get a response.
Thanks,
BrianC

Hmm.

I might have to think about a purchase for my birthday!

Buy that upper to swap on my SPR, and just use the same scope which is in a LaRue mount so I would just need to right down the dope and quick swap.