Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/1/2006 4:48:37 PM EST
Looking for someplace to get a lower anodized in the plattsburg area
Link Posted: 3/2/2006 5:07:54 AM EST
[Last Edit: 3/2/2006 5:08:33 AM EST by HKgnnr]
Did a quick search for you on Google - A place in Plattsburg called "Plattsburgh Paintball" says they do custom "anodizing" - however couldnt find a phone # or address.

Word of caution though, if anyone (besides yourself of course) is working on your lower they should have an FFL, I know this is true with "gunsmithing" on a lower, so "refinishing" it might fall under the same category. Perhaps check with the gunshops out that way to see if they have any leads.
Link Posted: 3/2/2006 9:22:25 AM EST
from the atf faq:

Is a license needed to engage in the business of engraving, customizing, refinishing or repairing firearms? [Back]

Yes. A person conducting such activities as a business is considered to be a gunsmith within the definition of a dealer. [27 CFR 178.11]
Link Posted: 3/12/2006 7:58:13 AM EST
A FFL is not needed because i plan on handcarrying the lower there and watching the work being preformed. That way there is no transfer of ownership.
Link Posted: 3/12/2006 8:34:42 AM EST
I would recommend sending your lower out to a place with experience in anodizing M16s. It has to be done very carefully to preserve the correct dimensions of the pin specs.

Take a look at this thread for some more info.
Link Posted: 3/12/2006 9:40:06 AM EST
You need to strip the old anodize off ( This needs to be done by the plateing people also) before you can anodize it. You should also polish things a bit after it is stripped.
Link Posted: 3/12/2006 10:35:56 AM EST
Link Posted: 3/16/2006 1:26:06 PM EST
[Last Edit: 3/16/2006 1:26:59 PM EST by mhwwlmc]
I "Second It" to send it down to Victor at US Anodizing. They are great people to work with. Turn around time is +/- a week.
Top Top