Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
10/20/2017 1:01:18 AM
9/22/2017 12:11:25 AM
Posted: 8/12/2005 3:39:35 PM EDT
[Last Edit: 8/12/2005 3:39:58 PM EDT by ThreatResponse]
I need a mini-y comp removed and a phantom installed. Anyone do this kind of work and guarantee not to screw it up. I don't want to ship off my upper. Thanks.
Link Posted: 8/14/2005 6:17:51 AM EDT
If you or someone you know has a drill press it's a pretty easy do it yourself job. Drill out the pins at 6 and 12 o' clock (take it slow and you'll do fine) unscrew the Y comp and slap on the Phantom. I thought we had a FFL/gunsmith from Hobbs that posted here but I can't recall his user name.
Link Posted: 8/14/2005 9:42:06 AM EDT
Link Posted: 8/14/2005 10:26:48 PM EDT
You're probably too far south for me (central NM), but if you aren't trying to save the mini-y comp, it should be fairly easy for anyone with a functioning brain to remove it with a cut-off wheel without damaging the barrel. I don't know how you're planning to attach the phantom so I won't comment on that.

I don't work on ARs for a living, but most anyone with a moderate amount of machining experience should be able to repair one. They just aren't that complicated or difficult to work on, and the repair data is widely available.
Top Top