Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/24/2006 8:50:51 PM EST
So there I was...naked

­

<­BR>





­

<­BR>
No seriously my truck seems to be out of action and since the wench will be working. I aint gonna make the LCR unless someone has a spare ride for a brotha from the Tacoma area on friday AM
Link Posted: 1/24/2006 8:58:56 PM EST
Link Posted: 1/24/2006 9:07:32 PM EST
New carb. wont stay set.
Link Posted: 1/24/2006 9:34:15 PM EST
One of my best friends is a master carb technician. If you want IM me your phone number and I will see if we can get you hooked up ASAP. He lives in Federal Way and does all of my custom carb work. The best part is he don't charge an arm or a LEG.

<­BR>

Just a neck
Link Posted: 1/25/2006 10:10:11 AM EST
I am trying to fix it at the moment but I dont know if I want to trust it to a long journey.

I could still use a ride if anyone has room
Link Posted: 1/25/2006 4:06:59 PM EST
Edlebrock carbs are not jetted for street use out of the box, get your self a "strip kit" [set of jets and needles] and jet it down till it gives you your best performance.

as for tuning it..after you've got it running.....start with the mixture screws out at about 2-2 1/2 turns....turn them in a quarter turn at a time...till the engine starts to stumble..then back out 1/4 turn, called a "lean drop" that will be where it runs best.

p.s. Make sure your carb is mated to your engine displacement......to many cfm's and it won't run very well.
Link Posted: 1/25/2006 9:43:42 PM EST
too many cfm is my problem I think. I got a 650 cfm on a 305 with a stock intake and only a spacer for a riser. It is getting dumped in hard. and I already leaned it out with jets and rods.

I might try a low flow electric pump and see if starving the carb a little helps
Link Posted: 1/25/2006 10:07:26 PM EST

Originally Posted By Berzerker77:
too many cfm is my problem I think. I got a 650 cfm on a 305 with a stock intake and only a spacer for a riser. It is getting dumped in hard. and I already leaned it out with jets and rods.

I might try a low flow electric pump and see if starving the carb a little helps



650 cfm is fine for a 305. Back when I had my '77 Camaro, it had a 305 with a 650 Holley....ran quite well. Is your problem at idle, just off idle or WOT ? Is the accelerator pump working properly? You might get more help here if you give a little more description of the problem than just saying it doesn't work.
Link Posted: 1/26/2006 5:00:12 AM EST
if you need a carb guy, Alan at Carb Tech on South Washington in Tacoma is pretty much the guru of carbs. 472 9667

Link Posted: 1/26/2006 9:14:33 AM EST
[Last Edit: 1/26/2006 9:14:59 AM EST by dukegnarley]
yeah my 650 Edelbrock dropped right onto my 302 and ran pretty well with just the stock settings.
Link Posted: 1/26/2006 3:37:47 PM EST
They still use Carbs?
Link Posted: 1/26/2006 3:42:23 PM EST
Go with a Stromberg 94!
Top Top