Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/31/2005 8:02:18 PM EST
Happy new Year to everyone and to a good shooting year
Link Posted: 12/31/2005 8:10:47 PM EST
happy new year, may it be better than the last.
Link Posted: 12/31/2005 8:11:25 PM EST
[Last Edit: 12/31/2005 8:13:01 PM EST by -Duke-Nukem-]
Link Posted: 12/31/2005 8:24:08 PM EST

Originally Posted By wump:
happy new year, may it be better than the last.


+1
Link Posted: 1/1/2006 4:36:09 AM EST
[Last Edit: 1/1/2006 4:38:08 AM EST by rmdye]
Duke, ouch....give that thing some Viagra. man i can say you had a bad newyear is a understatment. i gope te barell pin wasnt in there and you can salavage the receiver.

i hope the best for everybody.

Ronald

Link Posted: 1/1/2006 5:56:35 AM EST
Duke, you've got pussy on your shirt.
Link Posted: 1/1/2006 6:11:14 AM EST
Time to KRINK-i-fy that AK.

You can probably still salvage it if the bend isn't too far down. My 4" barreled AK is shorter than that I think.


Next time think 'barrel vise"!!!!

Happy frickin new whatever!!
Link Posted: 1/1/2006 6:43:23 AM EST
Happy New Year y'all!

Hope everyone else also whizzed off their neighbors with a mag full of .223 blanks at midnight.
Link Posted: 1/1/2006 11:31:26 AM EST
Hey Duke, is that a special barrel for firing from behind cover without exposing yourself to return fire?
Link Posted: 1/1/2006 1:18:20 PM EST
Link Posted: 1/1/2006 2:25:30 PM EST
[Last Edit: 1/1/2006 2:31:18 PM EST by -Duke-Nukem-]
Link Posted: 1/1/2006 2:57:02 PM EST
Duke,
You got me a little worried there bud (just kidding). I hope you guys do well with the shop this year. I'll be in touch with you some day about a AK build. Maybe in 5.45x39? Not sure yet.
Link Posted: 1/1/2006 3:57:58 PM EST
[Last Edit: 1/1/2006 4:47:52 PM EST by AFSOC]
This is what happens when you give a monkey a football!
Just Kidding some of the Romy AKs are so tight you need excessive force to install the barrels!
You need a proper Barrel fixture and a little TLC to do it right! Hey Marshall! Come by the shop sometime! I shoot out there in Wellsville from time to time give me a shout and we'll go blasting!

Link Posted: 1/1/2006 4:49:45 PM EST
Kerry, godammit where's yer respirator?
Link Posted: 1/1/2006 5:04:52 PM EST
The Bluing really does not call for it but you should have seen Duke spraying Moly Resin without one! Standing in a cloud of MEK laced mist! If I work with the dry chemicals I will use a dust mask or respirator..... Besides in that room if you use a respirator when running it needs to be supplied air due to the heat and humidity! Got a spare Scott Air pack?
Link Posted: 1/1/2006 6:58:32 PM EST
Duke, I always wondered what century had in mind with those canted front sight blocks. Must go on a model from your press. Seriously, How are your recievers going. I still want you to build me a pistol from an AMD kit that I have. Hope things are going well. From the pics you have some nice pieces you are turning out. CB
Link Posted: 1/1/2006 7:01:43 PM EST
Link Posted: 1/1/2006 7:28:59 PM EST

Originally Posted By -Duke-Nukem-:
Our receivers are going much better. Especially compared to some very expensive recievers that we recently acquired after a long delay, which were QUITE disappointing in quality control.

[Forrest Gump]And that's all I've got to say about that.[/Forrest Gump]



True.....

Took a while but this one worked fine....
and I have yet to make one that the bolt would not even go in like some expensive to remain nameless receivers....

Link Posted: 1/1/2006 8:27:44 PM EST
Looking good people.................
Top Top