Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 11/19/2007 6:40:14 PM EDT
First I bought a used, chrome lined, post ban, apprx. 1000 rds through it upper with out the bolt, bolt carrier, and charging handle on Gunbroker.com for $216.00 shipped
http://san1.atlanta.gbhinc.com/GB/084805000/84805031/pix869948390.jpg

Next I purchased a LMT Bolt Carrier Assembly from bravocompanyusa.com for $137.95 shipped.
http://www.bravocompanyusa.com/v/vspfiles/photos/BCG-LMT-AR15-2.jpg

Then I got a complete Stag lower with a fixed M4 CAR stock, and a charging handle from del-ton.com for $255.43 shipped
http://san1.atlanta.gbhinc.com/GB/084669000/84669080/pix744388109.jpg

Complete ar15 for $609.38 to the door. It took me awhile but I was able to accomplish what I set out to do, and I'm very happy with it he
This is the scope and mount I'm going to order tomorrow on sale for $68 unless anyone knows of a better idea.
Leapers AR-15 / M16 6X32 Platform Mini Rubber Armored Mil-Dot Red/Green Illuminated Scope for Carry handle or Flat Top
http://www.thecountryshed.com/SCP-632MDL3New.jpg
Link Posted: 11/19/2007 6:56:41 PM EDT
You did okay pricewise.
I hope you kept something in reserve to feed your new baby with.
Have a good time, and safe shooting!
Link Posted: 11/19/2007 7:10:45 PM EDT
height=8
Originally Posted By njJoniGuy:
You did okay pricewise.
I hope you kept something in reserve to feed your new baby with.
Have a good time, and safe shooting!
hey
Link Posted: 11/19/2007 7:30:32 PM EDT

Originally Posted By madblznguy:
I was in Dicks today and they wanted 23 dollars for 50 rds of remington. I'm just going to get the WX2-52591 Wolf® .223 55 Gr. FMJ 1,000 rds. for $219.97 and will pick a few boxes of something else cheap till it arrives.


With Wolf steel-cased at 22 cents a pop, I don't think you're going to find "something else cheap till it arrives"

Buy as many cases of Wolf at that price as your checkbook (and storage area) will allow.
It isn't getting any cheaper (just like gasoline these days)
Link Posted: 11/20/2007 1:15:53 AM EDT
Very nice setup. Send me an IM when you get it together and I'll take you over to CJRPC to try her out.
Link Posted: 11/20/2007 3:15:20 AM EDT
Not to rain on your parade, but, you will have to headspace it won't you? Otherwise, welcome to the club.

Brett
Link Posted: 11/20/2007 8:53:10 AM EDT
No head spacing needed with such few rounds down the tube. Also, he is using a new bolt. The stock looks kinda short. Is it pinned yet?
Link Posted: 11/20/2007 12:31:47 PM EDT

Originally Posted By PK90:
No head spacing needed with such few rounds down the tube. Also, he is using a new bolt. The stock looks kinda short. Is it pinned yet?


My pinned stock is pinned ALL THE WAY out. That one will get you into trouble right quick....
Link Posted: 11/20/2007 1:06:37 PM EDT
height=8
Originally Posted By vadge:
height=8
Originally Posted By PK90:
No head spacing needed with such few rounds down the tube. Also, he is using a new bolt. The stock looks kinda short. Is it pinned yet?
HE


LOL actually that's not my exact lower just an example. They didn't have a picture of mine with the fixed stock so I used that one :)
Link Posted: 11/20/2007 1:34:43 PM EDT

Originally Posted By PK90:
No head spacing needed with such few rounds down the tube. Also, he is using a new bolt. The stock looks kinda short. Is it pinned yet?


What's head spacing?
Link Posted: 11/20/2007 1:37:45 PM EDT

Originally Posted By LUGERMAN:
Very nice setup. Send me an IM when you get it together and I'll take you over to CJRPC to try her out.


Will do!
Link Posted: 11/20/2007 6:50:48 PM EDT
What's head spacing????????
Link Posted: 11/20/2007 7:20:16 PM EDT
Link Posted: 11/20/2007 7:54:32 PM EDT

Originally Posted By madblznguy:
What's head spacing????????


thanks!
Link Posted: 12/3/2007 1:48:34 PM EDT
Here's the pics



Link Posted: 12/3/2007 2:11:45 PM EDT
nice looking rig
Link Posted: 12/3/2007 2:24:39 PM EDT
I have one that looks EXACTLY like that. And I mean exactly. Stag lower, fixed M4 Buttstock and all.

I had a scope just like that and it was total junk. Had to take it off. Eye relief was horrible and the crosshairs were always canted to the side a bit. There was no way to adjust for the tilt of the scope.

I can shoot just fine without it anyway. About 4" groups @ 100 yards with the Iron Sights.
Link Posted: 12/3/2007 3:19:24 PM EDT

Originally Posted By vadge:

Originally Posted By PK90:
No head spacing needed with such few rounds down the tube. Also, he is using a new bolt. The stock looks kinda short. Is it pinned yet?


My pinned stock is pinned ALL THE WAY out. That one will get you into trouble right quick....


I've always wondered about this. Wouldn't it be OK if you maintained a minimum of 26"?

Link Posted: 12/3/2007 10:34:28 PM EDT
I have a short A2 style stock(mid entry) which is 1 inch shorter than a collapsible stock pushed all the way in. With a 16 inch legal barrel, the rifle's overall length is about 34 -36 inches. no where near the 26" inch rule.
Link Posted: 12/4/2007 4:49:15 AM EDT
[Last Edit: 12/4/2007 4:49:48 AM EDT by Argetni]

Originally Posted By AR_JACK:
I have a short A2 style stock(mid entry) which is 1 inch shorter than a collapsible stock pushed all the way in. With a 16 inch legal barrel, the rifle's overall length is about 34 -36 inches. no where near the 26" inch rule.


I am looking to get this stock for my AR build.

ACE Shorty



will it be NJ "legal"?

The guy told me it is the same length as an M4 collapsible pushed all the way in?
Link Posted: 12/4/2007 5:14:50 AM EDT
height=8
Originally Posted By madblznguy:


Then I got a complete Stag lower with a fixed M4 CAR stock, and a charging handle from del-ton.com for $255.43 shipped
san1.atlanta.gbhinc.com/GB/084669000/84669080/pix744388109.jpg



is that on their website? for some reason i don't see it with the fixed M4 stock like that. I see this, but that isn't an option:
http://www.del-ton.com/Stag_Arms_Lower_Receiver_with_Buttstock_p/lr1005.htm
Link Posted: 12/4/2007 1:01:29 PM EDT

Originally Posted By njitmetal:

Originally Posted By madblznguy:


Then I got a complete Stag lower with a fixed M4 CAR stock, and a charging handle from del-ton.com for $255.43 shipped
san1.atlanta.gbhinc.com/GB/084669000/84669080/pix744388109.jpg



is that on their website? for some reason i don't see it with the fixed M4 stock like that. I see this, but that isn't an option:
http://www.del-ton.com/Stag_Arms_Lower_Receiver_with_Buttstock_p/lr1005.htm


All you have to do is call and tell Betty (lady who answers the phone) which one you want. You are right it's not in the drop down menuon the site, so I ordered it over the phone.
Top Top