Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 10/10/2007 7:47:04 AM EST
Link Posted: 10/10/2007 7:51:42 AM EST
I pulled a %78 - and I say fuck 'em.

Decelleration is not a recognized physical term. It's all accelleration, increase or decreasing.

I still make MacGyver drool
Link Posted: 10/10/2007 7:59:12 AM EST
Link Posted: 10/10/2007 8:09:47 AM EST
I got 88%
Link Posted: 10/10/2007 8:10:20 AM EST
88% for me. I'd have felt really bad if I did any worse, considering I just graduated from OSU as a Mech E.
Link Posted: 10/10/2007 8:35:37 AM EST
88% for me as well.
the second to last question was kinda confusing, they didn't word it very well.
Link Posted: 10/10/2007 8:37:50 AM EST
I only got an 80% and I KNOW I'm more than 2% smarter than petagunner.



Link Posted: 10/10/2007 8:38:31 AM EST
Link Posted: 10/10/2007 8:44:19 AM EST
88%. And that's ~17 years after getting a BS in Engineering.
Link Posted: 10/10/2007 8:45:40 AM EST
[Last Edit: 10/10/2007 8:46:55 AM EST by JAFO]
Crap, I just realized it was a FORD test. No wonder a couple of the scenarios are bogus. The first electrical schematic with the short in it... all three bulbs would light up until one of them acted as the fuse, since there was not one included in the circuit.

Freaking Fordmaroons.

ETA: or... Asa can correct my assumption.
Link Posted: 10/10/2007 8:47:27 AM EST
Link Posted: 10/10/2007 8:52:09 AM EST
I managed 74% and I'm an artsy type that designs frocks and pants for a living, should I be worried if all it takes is another 6% to start designing engines for Ford.......(looks alarmedly at his fusion. )
Link Posted: 10/10/2007 9:01:15 AM EST
i got a 70 % i must be the retarded redneck you don't
want working on your car .
Link Posted: 10/10/2007 9:01:41 AM EST
86% for me. Should have been 88% as I marked one and moved on. Didn't know how to go back and change my answer.

Link Posted: 10/10/2007 9:02:12 AM EST
82% here. Would have been 86% but I somehow transposed two different answers in the time it took me to look from the diagram to the choices. Ah well.

Fun test though.
Link Posted: 10/10/2007 9:06:10 AM EST

Originally Posted By petagunner:
Says who?


Start a new thread with a poll and you will get your answer.
Link Posted: 10/10/2007 9:20:57 AM EST
Link Posted: 10/10/2007 10:03:09 AM EST
98% for me!!htlift.gifh

Link Posted: 10/10/2007 10:16:29 AM EST
[Last Edit: 10/10/2007 10:17:59 AM EST by GreenEyedDevil]
woo 80%

and im a kitchen designer ha!

i wish it gave an answer key at the end
Link Posted: 10/10/2007 10:30:57 AM EST
Damn...Only 94% here. Damn pulleys and pressure. Although I did remember my PV=nRT
Link Posted: 10/10/2007 10:41:13 AM EST
height=8


i wish it gave an answer key at the end




Click the symbol on lower left of screen and it will tell which ones are right.
Link Posted: 10/10/2007 11:31:20 AM EST

Originally Posted By petagunner:
Besides, what gives pickin on the redneck anyways?


You are a moderator. It's part of 'the code.'
Link Posted: 10/10/2007 11:43:33 AM EST
92... It has been a long time. Funny that we all probably nailed levers and turning, but pulleys and what not
Link Posted: 10/10/2007 11:53:32 AM EST
[Last Edit: 10/10/2007 1:22:00 PM EST by Ultvikefan]

Originally Posted By JAFO:
Crap, I just realized it was a FORD test. No wonder a couple of the scenarios are bogus. The first electrical schematic with the short in it... all three bulbs would light up until one of them acted as the fuse, since there was not one included in the circuit.

Freaking Fordmaroons.

ETA: or... Asa can correct my assumption.
The switch bypasses the bulb, the path of least resistance.

88% btw
Link Posted: 10/10/2007 12:10:14 PM EST
96%

All those years of Hot Rod magazine have finally paid off.
Link Posted: 10/10/2007 12:13:05 PM EST

Originally Posted By OrARGB:
I pulled a %78 - and I say fuck 'em.

Decelleration is not a recognized physical term. It's all accelleration, increase or decreasing.

I still make MacGyver drool


Ha, so did I!
Link Posted: 10/10/2007 12:41:42 PM EST
Fun test for a for an old mechanic like myself-94% should have got them all right though
VM
Link Posted: 10/10/2007 2:04:35 PM EST
Gehhhhh 82%

But I allready had a 2 hour personality/math/social skill test today to fry my brain...

The stuff you go through during the interview process...
Link Posted: 10/10/2007 2:21:42 PM EST
Link Posted: 10/10/2007 2:43:09 PM EST

Originally Posted By petagunner:

Originally Posted By Unka-Boo:
Gehhhhh 82%

But I allready had a 2 hour personality/math/social skill test today to fry my brain...

The stuff you go through during the interview process...


How's your knees?


Not bad, remembered the knee-pads.....but the top of my head is missing a little more hair...they really need to start adding padding to the bottom of desks....
Link Posted: 10/10/2007 2:54:20 PM EST
Link Posted: 10/10/2007 3:04:28 PM EST
Link Posted: 10/10/2007 3:11:16 PM EST
Damn, only got an 80%, good thing I don't work on cars for a living.
Link Posted: 10/10/2007 3:12:13 PM EST
[Last Edit: 10/10/2007 3:13:27 PM EST by warhound]
Damn, double tap. What do you expect I only got a 80%.
Link Posted: 10/10/2007 4:02:33 PM EST
98% for me. Damn, and I still break shit.
Link Posted: 10/10/2007 5:26:31 PM EST
82 for me.

I should havce had more since I did go to school fo rthat shit.

Granted it was 15 yrs ago, the mind is the first thing to go. Time to get Viagra..

Darin
Link Posted: 10/10/2007 6:53:18 PM EST
[Last Edit: 10/10/2007 6:59:38 PM EST by PromptCritical]
92%

ETA. Fan question is fucking stupid. screwed up the hydraulic problem, the balloon one, and the engine intake one (Technically correct I suppose, but both answers are really the same thing.)

Reminds me of the mechanical portion of the ASVAB...
Link Posted: 10/10/2007 7:09:03 PM EST
Intake-Compression-Power-Exhaust.........4 stroke is easy...waiting for RD to try and explain how a Rotary works without making our heads explode...

" ...Now picture a triangle wobbling around in an oval.....no, now follow me here....no, there's no valves....yes, it will run on it's own......"
Link Posted: 10/10/2007 7:30:54 PM EST
I usually just lurk hear, but this drew me out.

Anyways, 84 for me. I really should have scored more like a 96% except for the fact that I ran out of duct tape and bailing wire. Also I'm just not that smart.

Link Posted: 10/10/2007 9:14:16 PM EST
88%

Never taken any classes.
Link Posted: 10/10/2007 9:16:10 PM EST

Originally Posted By Unka-Boo:
Intake-Compression-Power-Exhaust.........4 stroke is easy...waiting for RD to try and explain how a Rotary works without making our heads explode...

" ...Now picture a triangle wobbling around in an oval.....no, now follow me here....no, there's no valves....yes, it will run on it's own......"


Dorito in a peanut shell.

rotaryengineillustrated.com/
Link Posted: 10/11/2007 5:44:05 AM EST
[Last Edit: 10/11/2007 7:30:50 AM EST by PhilipPeake]
84% ...

Just looked over the answers.
My problem is my usual one - read the F'n questions!!
Link Posted: 10/11/2007 6:14:07 AM EST
Link Posted: 10/11/2007 6:22:06 AM EST
I gave up by the 10th question.
Top Top