Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/5/2006 7:01:37 PM EST
[Last Edit: 1/6/2006 11:08:57 AM EST by Paul]
Link Posted: 1/6/2006 7:12:20 AM EST
How about returning the kit for a full refund
Link Posted: 1/6/2006 10:17:58 AM EST
Link Posted: 1/6/2006 11:02:34 AM EST
Link Posted: 1/6/2006 11:08:03 AM EST
Link Posted: 1/6/2006 8:51:50 PM EST
Paul, thanks for taking a bullet for us.
Link Posted: 1/7/2006 7:32:24 AM EST
Based upon my past inquires to the DOJ, I would conclude that the kit is not legal. It can be installed without a use of a tool..... i.e. the warning not to use finger-tight.
Link Posted: 1/7/2006 8:17:23 AM EST
Link Posted: 1/8/2006 12:22:33 PM EST
Any good welder can tack-weld that nut in place without damage to the lower. You just need to take a cutting disk to it and cut that nut off....

Link Posted: 1/8/2006 1:27:32 PM EST
How about using epoxy and epoxying the whole nut on? or a second thought is to drill it and put safety wire which will not be easily removable @ all, might be a b**ch to drill though ....
Link Posted: 1/10/2006 9:44:07 AM EST
Batf considers permanant type locktite to be as good as welding since it takes a propane torch to loosen.

But if a washer and a nut will cut it, esp with light duty locktite, then you're golden.

I'm thinking a nice rubber or fiber washer with a stainless washer and stainless locknut(they type with nylon in the end). Won't shoot loose or be finger removable, without ever having to torque the heck out of it.

I have a bushmaster fixed mag and the main gripe I have with it is that if you do mangage to get a death jam, (which only happened with a particular brand of sintered ammo), you cannot just yank out the mag. You have to do all the clearing work thru the ejection port, since the rifle won't field strip with the bolt back a little. Being able to yank the mag(after removing the pistol grip of course) would go a long way towards clearing a bad jam without having to use dental pics and play amatuer gun gynocologist.h.gif
Link Posted: 1/10/2006 1:06:11 PM EST
Link Posted: 1/11/2006 5:18:09 AM EST
Thanks Paul, I was wondering what was up with those kits.
Link Posted: 1/15/2006 8:06:38 AM EST
Link Posted: 1/15/2006 2:16:46 PM EST
Top Top