Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/23/2003 5:56:24 PM EST


Any of you guys are 1911 expert? I'm thinking about removing the firing pin safety out of my 1911 Series 80, but don't know how-to.
Can anyone help me or instruct me, or any website shows one how-to.

Thanks
Link Posted: 11/23/2003 7:37:22 PM EST
[Last Edit: 11/23/2003 7:37:53 PM EST by De_Professor]

Originally Posted By mojo:


Any of you guys are 1911 expert? I'm thinking about removing the firing pin safety out of my 1911 Series 80, but don't know how-to.
Can anyone help me or instruct me, or any website shows one how-to.

Thanks



Mojo,

Look it up online...you can find written direction with pictures. Otherwise, Cheaper than Dirt has a wilson 1911 manual that's great.

1911 forum has an archive thread on the subject.

That's the best I have a 11:30 at night.

Jeff

Link Posted: 11/24/2003 5:10:39 AM EST

Originally Posted By De_Professor:

Originally Posted By mojo:


Any of you guys are 1911 expert? I'm thinking about removing the firing pin safety out of my 1911 Series 80, but don't know how-to.
Can anyone help me or instruct me, or any website shows one how-to.

Thanks



Mojo,

Look it up online...you can find written direction with pictures. Otherwise, Cheaper than Dirt has a wilson 1911 manual that's great.

1911 forum has an archive thread on the subject.

That's the best I have a 11:30 at night.

Jeff




I am an expert. Just get a large piece of a 2x4. Finda hammer and place the 2x4 against the charging handle. Gently tap the 2x4 with the hammer, increasing the force of each successive blow until the bolt releases the stuck round...

No wait, that is how you unjam an MP5.

TRG
Link Posted: 11/24/2003 6:48:23 AM EST


Thanks Jeff. I'll look.

TRG. Yeah, I remember it. It was the first time that 1GUN has visit TX.
Link Posted: 11/28/2003 6:36:01 AM EST
The Kuhnhausen manuals on the 1911 are the be-all and end-all of 1911 knowledge.
Link Posted: 11/28/2003 12:01:07 PM EST
[Last Edit: 11/28/2003 12:07:00 PM EST by Sparsky]
Hey Mojo! This site will tell you how to strip it down to bare parts.

www.coltautos.com/default.asp
Link Posted: 11/28/2003 4:32:22 PM EST


Thanks for the info, Jarhead_22 and Spars.

I just want to hold off for now. Don't like the idea of moving rear sight off, in order to remove some of the parts from the FP safety.
Link Posted: 12/7/2003 5:39:45 PM EST
Link Posted: 12/10/2003 1:49:39 PM EST
Mojo - I have two 1911 mod books that step you through almost any process you can do to a 1911 to make it accuate or better.. they are written by Jerry Kuhnhausen

Ropes
Link Posted: 12/10/2003 2:35:49 PM EST


Hey, Ropes. How the hell are you, guy?

Where are you and Bung hiding?
Link Posted: 12/11/2003 5:14:20 AM EST
I don't think they have come out yet......
Top Top