Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
PSA
Member Login

Site Notices
Posted: 7/19/2010 1:10:53 PM EDT
[Last Edit: 7/19/2010 2:28:55 PM EDT by Fantomas]
I acquired a P228 that based on the markings is from 1990 (KA).

Overall it is in good shape, the Grips and screws need to be replaced. It has a little ware on the Frame and from what I can see the internals look good. (but than again I am not a professional Gunsmith)
I am planning to send it to Sig to get it Serviced but wanted see what others think about the following issue with the Slide  

When the Magazine is not in the Gun and you shake it a little the Slide wobbles but when the Magazine is in it this does not happen. When I compared it to all the other Sig's I have - the P6 & P229 they do not have this issue.  
I am wondering if this is a Safety issue as I have not fired it yet and just want to make sure if I should just forget about shooting it and just sending it off as I had planned already. I am not able to see if there is any damage to the Slide or Frame. The previous owner used a Harrts Mercury Guide Rod in the Gun not sure if this may have had some effect on the Gun.

thank you very much for all the help and feedback anybody can provide me.


EDIT:

Just talked to a Guy at SIG and he told me that this is apparently normal for this GUN, He said nothing to worry about but to be sure after they do all the work they will Test it to make sure all is the way it supposed to be.

Link Posted: 7/19/2010 7:27:05 PM EDT
Fantomas,

That is good news....keep us posted on when take her out to the range!

Mick
Link Posted: 7/19/2010 7:48:14 PM EDT
Originally Posted By mic214:
Fantomas,

That is good news....keep us posted on when take her out to the range!

Mick


thanks again for your help with this that was very kind and much appreciated.


Link Posted: 7/20/2010 5:13:37 AM EDT
[Last Edit: 7/20/2010 5:13:37 AM EDT by Dog1]
OP's request..
Top Top