Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 1/22/2006 5:33:01 PM EDT
Any aftermarket barrel maker available for the stock length barrel for the p220 mine finally gave up the ghost. Thanks in advance.
-Sigadvantage-
Link Posted: 1/22/2006 5:43:38 PM EDT
Don't have any (excapt maybe go back to SIG), but I have to ask, how many rounds did it take to pull that off? I have never heard of someone shooting a SIG barrel out.

Nick
Link Posted: 1/22/2006 10:13:03 PM EDT
I bought it used in 1999 it was a Keizer pd lot sale when they changed to a new model so I don't know the original round count but it has seen 15-16K in the time that I have owned it. West German make. Still have a second one I bought at the same time and have only put about 200rnds to test after I bought it .Looks like it will be seeing alot of use until I can locate a barrel.
-sigadvantage-
Link Posted: 1/23/2006 4:23:43 AM EDT
Link Posted: 1/23/2006 1:48:46 PM EDT
[Last Edit: 1/23/2006 1:50:43 PM EDT by sigadvantage]
ikor,There has always been a dark ring just past the chamber in this barrel since I bought it. No matter how it was cleaned it never dissapeared now it is to the point where the rifleing is gone in that area and the barrel is starting to swell over that spot ever so slightly. the pistol still functioned but accuracy was going down the drain the last 400rds or so. I have a extra barrel in .400 corbon that is a tack driver though that I found at a gun show just wish I would have bought a .45 barrel at the same time.
-sigadvantage-

edited for sp
Link Posted: 1/23/2006 7:33:57 PM EDT
I'd go with a Bar Sto barrel in the semi-drop in. The accuracy is a little better, can't get really much more accuracy out of a gun that great, but it'll probablyt cost you a lot less than a factory barrel.
Link Posted: 1/23/2006 9:51:07 PM EDT

Originally Posted By ACClauhs:
I'd go with a Bar Sto barrel in the semi-drop in. The accuracy is a little better, can't get really much more accuracy out of a gun that great, but it'll probablyt cost you a lot less than a factory barrel.



I doubt it would be much less. A new one from Sig would be about $200 I think. Thats the route I'd go.
Link Posted: 1/24/2006 7:15:01 AM EDT
Link Posted: 1/24/2006 8:49:19 AM EDT
[Last Edit: 1/24/2006 8:49:50 AM EDT by glklvr]

Originally Posted By drew5337:

Originally Posted By ACClauhs:
I'd go with a Bar Sto barrel in the semi-drop in. The accuracy is a little better, can't get really much more accuracy out of a gun that great, but it'll probablyt cost you a lot less than a factory barrel.



I doubt it would be much less. A new one from Sig would be about $200 I think. Thats the route I'd go.



SIG barrels are $180 from the factory. I couldn't believe it. For SIG that is CHEAP!
Top Top