Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 5/18/2005 4:39:33 AM EDT
just got a new one and want to add a +2 ext but cant get the base off,any help appreciated.
Link Posted: 5/18/2005 4:48:27 AM EDT
ok. Squeeze the sides as you use the cutting board lip to engage the little part of the baseplate. it does not allow over travel as the counter top will be where your knuckles rest, and wood wont mar the mag.
Link Posted: 5/18/2005 7:08:17 AM EDT
[Last Edit: 5/18/2005 7:08:46 AM EDT by MrMojoRising]
Use the Glock armorers tool or a like sized punch. Poke it thru the bottom of the mag then push forward. Baseplate will pop right off.

Step by step pics here...

Link Posted: 5/18/2005 3:23:40 PM EDT
It is soft plastic, so you should expect it to get mangled a bit each time you take it off.
As another guy said, squeeze the bottom of the mag tube while pushing the baseplate
off. You should see two tabs as you look at the baseplate, on both sides. These are
what's holding the baseplate on, along with the little button on the bottom you stick
a punch in and push in a few mm.
Link Posted: 5/18/2005 3:35:06 PM EDT
Link Posted: 5/19/2005 6:15:20 PM EDT
It may have just been me but to get mine off of my 27 mag I hade to put it in a vise and squeeze the dickens out of it.hinking.gif
Top Top