Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/19/2006 8:23:50 AM EST
Is there anywhere where I can send out my slide and have nightsights installed?
Link Posted: 3/19/2006 8:30:34 AM EST
What model? And what color, Gnr/Grn, Grn/Yel?
Link Posted: 3/19/2006 9:17:01 AM EST
If we knew where you lived, someone might volunteer to put them on for you.
Link Posted: 3/19/2006 11:06:32 AM EST
Glock 19 and green/green. I have a buddy who I think has access to the tools through work, but I thought there were some places that basically install them for no charge if you mail them the slide, that would save me bothering him.

Link Posted: 3/19/2006 11:09:19 AM EST
[Last Edit: 3/19/2006 11:09:51 AM EST by twonami]
Most any shop can do it.
Do it yourself. Glock sights are incredibly easy to replace. Midway or Trijicon will sell a special nut driver bit for the front sight.
Link Posted: 3/19/2006 12:20:32 PM EST
Do it yourself. It took me all of 15 minutes with a plastic punch and a hammer to remove my Trijicon ones and add the CGR Amerigo Ops.

CGR and Ameriglo will include the front sight screw driver.
Link Posted: 3/19/2006 12:21:31 PM EST
I would check with your local shops first. Mine will install them for free if you buy the sights from them or it's a $15 charge if you bring in your own sights.

You might want to try your local gun shows as well. Some vendors will install them while you wait if you purchase the sites from them.
Link Posted: 3/19/2006 12:36:33 PM EST
Ameriglos come with the tool for the front sight. A wooden dowel or lead bullet will drive the rear sight in. You will need a little loctite for the front sight screw. I prefer blue Loctite over red and it's about $4.

If you want to do it an easier way, get the MGW sight pusher for about $60.
Link Posted: 3/19/2006 12:40:08 PM EST
If you buy the Ameriglo smooth slopes, they come with everything you need to install them. A front sight tool and a small allen wrench for the rear. They have Trijicon tubes also.
Link Posted: 3/19/2006 2:49:55 PM EST
Link Posted: 3/19/2006 3:56:42 PM EST

PM sent.
Top Top