User Panel
User Panel
User Panel
|
Posted: 1/1/2017 12:28:14 PM EDT
[#1]
Quoted:
I've been looking st the Roland Special from KKM. I ran across the TBRCi comp. I already have a 1/2x28 barrel so this would save some coin. Anyone used one? Link I just fent... I'll let you know soon. 
|
|
|
|
Posted: 1/1/2017 1:35:42 PM EDT
[#2]
I've had mine on my G19 since they released them. I've been really impressed with it.
|
|
|
|
Posted: 1/1/2017 3:20:18 PM EDT
[#3]
Very interested in these or the new S3F Solutions micro comp.
I'm still trying to figure out how the set screws keep it tight with no flats on the barrel? My Fowler Industries G19 is gonna get one of these or the S3F comp eventually. Still need to see more of each. |
|
|
|
Posted: 1/1/2017 5:27:10 PM EDT
[#4]
Quote HistoryQuoted:
Very interested in these or the new S3F Solutions micro comp. I'm still trying to figure out how the set screws keep it tight with no flats on the barrel? My Fowler Industries G19 is gonna get one of these or the S3F comp eventually. Still need to see more of each. I just ordered one. I'll let you know what I come up with. |
|
|
|
Posted: 1/1/2017 6:15:28 PM EDT
[#5]
Any pictures of the S3F comp?
|
|
|
|
Posted: 1/1/2017 6:58:46 PM EDT
[#6]
Quote HistoryQuoted:
Any pictures of the S3F comp? It uses a special barrel to achieve how small it is. It seems to be roughly the side of the NOC comp, bringing it to G17 lengths.  Attached File |
|
|
|
Posted: 1/1/2017 8:59:50 PM EDT
[#7]
I have one and it's great makes shooting great it now feels like a .22 LOL just waiting on my new holster so I can run it full time on the G19 ...I like the looks of that S3F comp but wonder what the price Is for those ? And are they available?
|
|
|
|
Posted: 1/1/2017 10:03:39 PM EDT
[#8]
Quote HistoryQuoted:
I have one and it's great makes shooting great it now feels like a .22 LOL just waiting on my new holster so I can run it full time on the G19 ...I like the looks of that S3F comp but wonder what the price Is for those ? And are they available? Are you running a g34 holster? |
|
|
|
Posted: 1/1/2017 10:12:36 PM EDT
[#9]
Quote HistoryQuoted:
Are you running a g34 holster? No I ordered a G17 size holster with an open bottom, in case it sticks out a tad ? I hope it will work LOL |
|
|
|
Posted: 1/1/2017 10:22:01 PM EDT
[#10]
Quote HistoryQuoted:
It uses a special barrel to achieve how small it is. It seems to be roughly the side of the NOC comp, bringing it to G17 lengths. https://www.AR15.Com/media/mediaFiles/241023/20170101-175634-118154.JPG What is this picture from? I can't find anything about this on S3F's instagram or Facebook or Google or anywhere else. Is there any info out there on these? ETA: figured it out. Looks like a project between mayhem syndicate and s3f. Can't wait, looks awesome. |
|
|
|
Posted: 1/2/2017 8:49:00 AM EDT
[#11]
Relevant to my interests.
|
|
|
|
Posted: 1/2/2017 12:08:54 PM EDT
[#12]
I want to put one of these on my G26 for some reason.
|
|
|
|
Posted: 1/2/2017 8:15:58 PM EDT
[#13]
So far, so good. Haven't got to shoot it much. Doesn't feel much different from the Carver Custom 2-port it replaced.
Carrying in a CNC G34 holster. |
|
|
|
Posted: 1/2/2017 9:54:42 PM EDT
[#14]
Got the chance to hit the range today again with it. No movement of the comp with blue loctite on the set screws after 500 rounds.
 Jagerwerks G19 w/ TBRCi Micro Comp |
|
|
|
Posted: 1/2/2017 10:02:13 PM EDT
[#15]
Quoted:
I've been looking st the Roland Special from KKM. I ran across the TBRCi comp. I already have a 1/2x28 barrel so this would save some coin. Anyone used one? Link The guys over in the Roland thread are running them, might want to check over there too... |
|
|
|
Posted: 1/4/2017 9:53:11 AM EDT
[#16]
I am also curious about this, been thinking hard about picking one up since they came out. Anyone tried running 115 grain through them? Do you have to use a lighter spring?
|
|
|
|
Posted: 1/4/2017 10:12:05 AM EDT
[#17]
Quote HistoryQuoted:
I am also curious about this, been thinking hard about picking one up since they came out. Anyone tried running 115 grain through them? Do you have to use a lighter spring? That's what I been using through mine, and Russian steel cased to boot... and no issues runs great it's on a G4-19 |
|
|
|
Posted: 1/4/2017 1:39:14 PM EDT
[#18]
Quote HistoryQuoted:
I am also curious about this, been thinking hard about picking one up since they came out. Anyone tried running 115 grain through them? Do you have to use a lighter spring? Mine runs like a top with 115. I did have some trouble with 147gn. |
|
|
|
Posted: 1/5/2017 10:14:38 AM EDT
[#19]
Quote HistoryQuoted:
Mine runs like a top with 115. I did have some trouble with 147gn. What kind of problems did you have with the 147 grain? |
|
|
|
Posted: 1/5/2017 10:50:31 AM EDT
[#20]
Quote HistoryQuoted:
What kind of problems did you have with the 147 grain? Failure to eject. Slide wasn't coming back all the way. |
|
|
|
Posted: 1/10/2017 11:29:19 PM EDT
[#21]
I got a shipping notification today.
|
|
|
|
Posted: 1/11/2017 12:14:28 AM EDT
[#22]
I have the TBRC comp on my gen 4 g19 mos and I've been having feeding and ejection issues with 115s, 124s, and 147s. Starting to think it's the gun lol.
I have a 13lb recoil spring coming though, should be here friday. Will hit the range and update at that time. I should also add that I have a leupold delta point pro on my g19 as well so there's added weight to the slide. Maybe the combo of stock RSA with comp and red dot is causing problems??? |
|
|
|
Posted: 1/13/2017 4:13:15 PM EDT
[#23]
received my comp today.
It fit perfectly in my supertuck. The comp it's self has some tooling marks on it but other than that it seems like its quality. I am gonna have the machinist mill a few up on some extra aluminum we have laying around. |
|
|
|
Posted: 1/13/2017 8:43:25 PM EDT
[#24]
Fits my holster fine
 Attached File |
|
|
|
Posted: 1/13/2017 9:46:14 PM EDT
[#25]
UPDATE: Got my 13lb spring and stainless steel guide rod. Ran 60 rounds of 115 grain PMC 9mm through my G19 gen4 with TBRC micro comp and had zero malfunctions. I know 60 rounds isn't much, but that's already a vast improvement over previous performance. Now to put in some more time at the range....
|
|
|
|
Posted: 1/13/2017 10:48:51 PM EDT
[#26]
|
|
|
|
Posted: 1/15/2017 10:45:20 AM EDT
[#27]
ran a few mags through it yesterday... 115 grain NATO.
There is a noticeable difference in recoil pattern. I'd say it was more than I was expecting it to be which is good, it means it works. I also carried it all day in my crossbreed. The comp sticks past the leather and it kind of got uncomfortable in the car so I took it out and slid it between center console and the seat. The only downside I noticed while shooting it, is shooting at night, there is a noticeable "fireball" that can disorientate you a bit, it is more profound during rapid fire. All things considered though, I think this is a great purchase for a G19/17. |
|
|
|
Posted: 1/19/2017 6:43:34 AM EDT
[#28]
Are you guys running an o-ring between the barrel and the comp? I blue loctited the set screws and mine still came loose after about 150rds the other day. Some say they are running an o-ring on the barrel and don't seem to be having the same issues I am.
|
|
|
|
Posted: 1/19/2017 12:03:01 PM EDT
[#29]
Quote HistoryQuoted:
Are you guys running an o-ring between the barrel and the comp? I blue loctited the set screws and mine still came loose after about 150rds the other day. Some say they are running an o-ring on the barrel and don't seem to be having the same issues I am. Did you torque your set screws to 11-12 inch pounds? I'm just using blue loctite on my set screws and have had zero issues with just over 2k rounds now. If you are having some rotation issues with your set screws torqued to spec, blue loctite on your barrel threads should fix ya right up. |
|
|
|
Posted: 1/19/2017 12:41:53 PM EDT
[#30]
Has anyone tried dimpling the barrel for the set screws?
|
|
|
|
Posted: 1/19/2017 1:54:46 PM EDT
[#31]
Quote HistoryQuoted:
Has anyone tried dimpling the barrel for the set screws? I considered creating flats, but if you don't get it perfect, you're comp will be crooked. I also haven't had any issues with rotation so I guess I'll leave it alone for now. |
|
|
|
Posted: 1/20/2017 4:30:39 AM EDT
[#32]
Quote HistoryQuoted:
I considered creating flats, but if you don't get it perfect, you're comp will be crooked. I also haven't had any issues with rotation so I guess I'll leave it alone for now. I was thinking the same thing, afraid to dimple the barrel or do flats and my comp end up crooked. I will try the o-ring first, and if that doesn't work I will try Loctite on the barrel threads plus the o-ring. If NONE of that works, I guess ill be the guinea pig and dimple the barrel. What size o-ring, anybody know offhand? |
|
|
|
Posted: 1/27/2017 3:21:57 PM EDT
[#33]
What specific recoil spring are you using and where are you getting it from?
|
|
|
|
Posted: 1/27/2017 8:39:06 PM EDT
[#34]
Quote HistoryQuoted:
What specific recoil spring are you using and where are you getting it from? I am using an NDZ Performance stainless steel guide rod with 13lb ISMI spring. Bought mine directly from their website but they can also be found on amazon. |
|
|
|
Posted: 1/29/2017 5:52:19 AM EDT
[#35]
Quote HistoryQuoted:
What specific recoil spring are you using and where are you getting it from? Mine is stock on a pistol with over 15K rounds on it lol. Not one single malfunction with the micro comp from any of the ammo ive tested it with yet. Most people are running the stock spring with no issue. |
|
|
|
Posted: 1/29/2017 11:16:35 AM EDT
[#36]
Quote HistoryQuoted:
I was thinking the same thing, afraid to dimple the barrel or do flats and my comp end up crooked. I will try the o-ring first, and if that doesn't work I will try Loctite on the barrel threads plus the o-ring. If NONE of that works, I guess ill be the guinea pig and dimple the barrel. What size o-ring, anybody know offhand? Quote HistoryQuoted:
Quoted:
I considered creating flats, but if you don't get it perfect, you're comp will be crooked. I also haven't had any issues with rotation so I guess I'll leave it alone for now. I was thinking the same thing, afraid to dimple the barrel or do flats and my comp end up crooked. I will try the o-ring first, and if that doesn't work I will try Loctite on the barrel threads plus the o-ring. If NONE of that works, I guess ill be the guinea pig and dimple the barrel. What size o-ring, anybody know offhand? I'd like to know what size o-ring as well. Every time I've taken my TBRC comped pistol to the range it gets loose enough to remove with zero effort. |
|
|
|
Posted: 1/31/2017 7:48:30 AM EDT
[#37]
Quote HistoryQuoted:
I'd like to know what size o-ring as well. Every time I've taken my TBRC comped pistol to the range it gets loose enough to remove with zero effort. Just by googling it appears that a #6 is what we need, make sure its the high temp grade o-ring. It has a name, but I cant remember it now offhand. Im going to the hardware store this afternoon for a stroll and see what I find. |
|
|
|
Posted: 1/31/2017 8:57:14 AM EDT
[#38]
Interesting feedback on this topic. I just ordered a TBRC mini comp this week. Hopefully, it will arrive in a few days and I then I can decide which pistol to install it on.
|
|
|
|
Posted: 1/31/2017 8:58:43 AM EDT
[#39]
Interesting feedback on this topic. I just ordered a TBRC mini comp this week. Hopefully, it will arrive in a few days and I then I can decide which pistol to install it on.
|
|
|
|
Posted: 2/3/2017 10:02:19 PM EDT
[#40]
I cannot get the screws to tighten enough to keep it from spinning on my new silencer co barrel. I dropped a single drop of rocksett to make it set.
|
|
|
|
Posted: 2/3/2017 10:50:00 PM EDT
[#41]
They just announced they'll be selling an M&P specific version.
|
|
|
|
Posted: 2/3/2017 11:08:50 PM EDT
[#42]
And now it's hanging up on the retention mechanism on my safariland holster. It locks into the ejection port and breaks with the thumb, but now catches on the comp
|
|
|
|
Posted: 2/3/2017 11:37:17 PM EDT
[#43]
Quote HistoryQuoted:
Just by googling it appears that a #6 is what we need, make sure its the high temp grade o-ring. It has a name, but I cant remember it now offhand. Im going to the hardware store this afternoon for a stroll and see what I find. Quote HistoryQuoted:
Quoted:
I'd like to know what size o-ring as well. Every time I've taken my TBRC comped pistol to the range it gets loose enough to remove with zero effort. Just by googling it appears that a #6 is what we need, make sure its the high temp grade o-ring. It has a name, but I cant remember it now offhand. Im going to the hardware store this afternoon for a stroll and see what I find. I picked up a 3-pack from here. I'm sure I overpaid, but it was easy. |
|
|
|
Posted: 2/6/2017 8:38:32 PM EDT
[#44]
Quote HistoryQuoted:
I cannot get the screws to tighten enough to keep it from spinning on my new silencer co barrel. I dropped a single drop of rocksett to make it set. I tried that this weekend and mine still spun loose. I'm gonna ditch it and go with a KKM barrel and comp like I should have done in the first place. |
|
|
|
Posted: 2/7/2017 10:06:04 AM EDT
[#45]
Anyone have info on when the S3F comp is going to be released?
|
|
|
|
Posted: 2/7/2017 10:09:15 AM EDT
[#46]
Quote HistoryQuoted:
Anyone have info on when the S3F comp is going to be released? I've asked numerous times, and they won't even acknowledge my question.....so I'm betting not anytime soon. |
|
|
|
Posted: 2/7/2017 10:20:44 AM EDT
[#47]
Yeah. It looks like an external choke type mounting system. Makes me wonder if it will hold up to slide wear. I definitely prefer it to the larger options.
|
|
|
|
Posted: 2/9/2017 7:01:38 AM EDT
[#48]
Quote HistoryQuoted:
I tried that this weekend and mine still spun loose. I'm gonna ditch it and go with a KKM barrel and comp like I should have done in the first place. Im still having issues with mine coming loose as well, ill be going with KKM too I think. I used blue Loctite set for over 24hrs, and got the screws tight enough that I almost stripped one of them, and it still twists about 1/8 of a turn after several shots. I can twist it right back by hand(it is still very tight on the barrel at this point), but then it moves again on its own in a few more shots. As for the KKM, since it is a proprietary system does their barrel have dimples or flats to lock the comp in time? I see it still uses set screws, but is it more secure? I don't see people having the same problems with them. |
|
|
|
Posted: 2/9/2017 2:48:17 PM EDT
[#49]
Quote HistoryQuoted:
Im still having issues with mine coming loose as well, ill be going with KKM too I think. I used blue Loctite set for over 24hrs, and got the screws tight enough that I almost stripped one of them, and it still twists about 1/8 of a turn after several shots. I can twist it right back by hand(it is still very tight on the barrel at this point), but then it moves again on its own in a few more shots. As for the KKM, since it is a proprietary system does their barrel have dimples or flats to lock the comp in time? I see it still uses set screws, but is it more secure? I don't see people having the same problems with them. I can confirm - the KKM has flats where the set screws engage, at the 3 and 9 position. |
|
|
|
Posted: 2/10/2017 2:16:51 AM EDT
[#50]
Quote HistoryQuoted:
I can confirm - the KKM has flats where the set screws engage, at the 3 and 9 position. Roger that, thanks for the info Airborne. Im going to go ahead and eat the cost and pick up the KKM combo, just don't want the hassle of fooling with this microcomp anymore. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File