Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/5/2010 4:16:11 AM EST
I have heard you can swap these out to remove the mag disconnect, but does that apply to the 22/45, too?
Link Posted: 9/5/2010 3:49:20 PM EST
Originally Posted By Saiga12MD20:
I have heard you can swap these out to remove the mag disconnect, but does that apply to the 22/45, too?



Same parts for both

The gun works fine with the mag disconnect, but switching out the bushing for the MKII is easier and prevents slop of the hammer.

You can also use some washers if you want.

And you can also just chop the two ends off of the mag disconnect so it does not make contact with anything.
Link Posted: 9/6/2010 12:46:27 AM EST
Works great. I have 15 of them. Would you like one? Send me an IM.
Link Posted: 9/6/2010 4:29:07 AM EST
In addition to replacing the bushing with a MK II bushing, I replace the hammer with a VQ MK II hammer, and a VQ sear. I have gotten much better triggers than the guns had when I received them.
Top Top