Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
PSA
Member Login

Posted: 2/17/2010 1:49:38 AM EDT
Trying to remove the ejector on my P-14, but I'm having a heck of a time. Is the pin retaining the ejector press fit or just a friction fit roll pin? It sure doesn't want to budge.
Link Posted: 2/20/2010 3:30:52 AM EDT
[Last Edit: 2/20/2010 3:32:12 AM EDT by Dano523]
Link Posted: 2/23/2010 11:10:24 PM EDT
Dano, I found the pin, but I keep breaking pin punches trying to tap out the pin. That's why I was wondering if there was something more elaborate going on here?
Link Posted: 6/2/2010 1:57:17 AM EDT
Just to update, have'nt been on here in awhile. I did finally get the ejector pin out. It was a pain. Basically the area on the rails around the pin hole had peened over blocking the pin from being able to drift out. I just used a drill and carefully removed just enough metal to let the pin drift out. I hated to have to remove metal, but it was'nt coming out any other way that I could see.
Top Top