Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
10/20/2017 1:01:18 AM
9/22/2017 12:11:25 AM
Posted: 9/6/2005 4:54:04 AM EDT
Link Posted: 9/6/2005 5:10:07 AM EDT
[Last Edit: 9/6/2005 5:11:20 AM EDT by SteelonSteel]
Bob,

That stinks, I've never broke a spring in anything until this year and that was my fault, I pinched my magazine spring while reassembling my 700 Adl and tried to straighten it.

That should be a cheap fix though. Are you going to buy a complete spring kit? I never worked on those in the service. They were too new when I got out. All I ever did was a correspondence course for armorers on them.

Tom
Link Posted: 9/6/2005 5:13:47 AM EDT
You should have bought a COLT!
Link Posted: 9/6/2005 5:39:44 AM EDT
Its common to break the trigger spring in Beretta pistols, especially if you dry fire. They are cheap and easy to replace. Beretta and Wolff both have them, and Wolff makes an unbreakable coil type replacement assembly.

Rob
Link Posted: 9/6/2005 6:33:22 AM EDT

Originally Posted By markm:
You should have bought a COLT!



I hear that a certain site staffer will be spending a LOT more time with a 1911

Link Posted: 9/6/2005 6:34:20 AM EDT

Originally Posted By Aimless:
My 92 broke Monday morning at the range. The trigger return spring broke.--sniffle--


Other than some holster wear it was in good shape.



It was that DAMNED Wolf ammo!
Link Posted: 9/6/2005 6:37:11 AM EDT
at least it's a easy fix
Link Posted: 9/6/2005 9:33:37 AM EDT
You should have bought a glock
Link Posted: 9/6/2005 10:25:17 AM EDT

Originally Posted By markm:
You should have bought a COLT!



Can't
Outlast
Loricn
­Types

Link Posted: 9/6/2005 10:57:35 AM EDT
nOt uncommon at all to break the trigger return spring in DA autos. I broke mine in my P220. My co workers have also broken a few in their P226. If you rely on the weapon for anything serious replace that sping when you replace the recoil sping.
Link Posted: 9/6/2005 11:30:53 AM EDT
You should have bought a tactical lorcin.


I would go with the wolf coil set up. I think it is only about $20 or so.
Link Posted: 9/6/2005 1:21:18 PM EDT
Heck that's a small thing to fix. In the last shooting school I attended it happend to two Glocks in one day. Watch-Six
Link Posted: 9/6/2005 1:59:00 PM EDT
Link Posted: 9/6/2005 4:20:50 PM EDT
Link Posted: 9/6/2005 10:01:25 PM EDT
I've got six DA/SA semi autos, including 2 berettas and I've never broken a trigger return spring......probably 100,000 rounds through all of them.

So, it can't be THAT common or it would have happened to me at least once.

But, as stated, it's not a big deal to change. I've torn my Berettas down and they're pretty easy.
Link Posted: 9/8/2005 12:47:59 AM EDT
I have a few spares myself, just in case this happens to me. I picked them up while ordering a few "D" hammer springs to lighten up the DA pull. Spare parts are invaluable when you need them. -- Stock up on a single order and go in with a friend or two to save on shipping. Beretta’s customer support is helpful, efficient, fast in shipping, and the parts are inexpensive (most of them anyway.)

Link Posted: 9/8/2005 12:58:04 AM EDT

Originally Posted By SGB:
Easy fix,

however I don't suggest you use the OEM part but this instead www.gunsprings.com/1ndex.html
www.gunsprings.com/images/Trigger.JPG

You won't break that one.




The INS mod from Wolff is the way to go. It'll end that common problem with the 92.
Link Posted: 9/8/2005 8:11:23 PM EDT
I heard once that happens, you have to replace that gun with a real gun, a 1911.

*waits for the ground to open up and swallow him as commanded by Aimless*

All kidding aside, that seems to be a semi common fail after use with them. It's a cheap fix to get back up and shooting with it though. I have also heard not to use the Beretta part to replace it as others have said.
Link Posted: 9/9/2005 2:46:30 AM EDT
Link Posted: 9/9/2005 5:27:15 AM EDT
LMAO!!!

Can't go wrong with the Colt 92FS!!!

Shoulda bought a Taurus!!!





J/K!
Link Posted: 9/9/2005 5:30:47 AM EDT
Quit BumpFiring it and you'll stop breaking these parts!
Link Posted: 9/9/2005 11:15:27 PM EDT

Originally Posted By justinwb:
You should have bought a 1911



My thoughts exactly!
Link Posted: 9/10/2005 12:22:39 AM EDT

Originally Posted By Lumpy196:

Originally Posted By SGB:
Easy fix,

however I don't suggest you use the OEM part but this instead www.gunsprings.com/1ndex.html
www.gunsprings.com/images/Trigger.JPG

You won't break that one.




The INS mod from Wolff is the way to go. It'll end that common problem with the 92.



Just so long as you don’t have a late model 92FS with the polymer trigger
Link Posted: 9/11/2005 6:30:40 AM EDT
[Last Edit: 9/11/2005 6:33:40 AM EDT by tooly]

Originally Posted By markm:
You should have bought a GLOCK!



There .... that's MUCH better !!!
Link Posted: 9/11/2005 5:31:45 PM EDT

Originally Posted By tooly:

Originally Posted By markm:
You should have bought a GLOCK!



There .... that's MUCH better !!!




The COLT 92fs is much better than the GLOCK 92fs!
Link Posted: 9/11/2005 8:14:25 PM EDT

Originally Posted By markm:

Originally Posted By tooly:

Originally Posted By markm:
You should have bought a GLOCK!



There .... that's MUCH better !!!




The COLT 92fs is much better than the GLOCK 92fs!



They are both dangerous plasma gunS "AND BOTH SHOULD BE BANNED"

You made tears come out of my eyes !!!
Top Top