Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
Posted: 4/21/2015 3:29:17 PM EDT
Good afternoon everyone, long time lurker, first time poster here.

I was hoping someone would know where to find a new extractor for a BHP that my dad has. It's a former Austrian police (if memory serves me) pistol that we are fairly sure is from the early to mid 60's (internal extractor). His long time gunsmith (not of the kitchen table variety) has confirmed our suspicions that it is indeed the extractor that needs replacement. This thing is too pretty to sit in a safe collecting dust!

Thanks in advance for your help!
Link Posted: 4/21/2015 6:01:01 PM EDT
You're not going to like this, but what you're after has become an incredibly rare part.

Marstar, Numrich and Sarco all used to carry this part, Numrich and Marstar still list them but show them as out of stock.

I would be keeping an eye out at gun shows and on ebay / gun broker and the like.
If you find some, A: they won't be cheap and B: buy 2 or 3 because you likely won't find them again.

Good luck.
Link Posted: 4/21/2015 8:44:05 PM EDT
Link Posted: 4/22/2015 9:29:55 AM EDT
You weren't kidding! Any idea why these things are so rare these days?
Link Posted: 4/22/2015 10:20:23 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Quoted:
You weren't kidding! Any idea why these things are so rare these days?
View Quote


That design has been out of production for decades. The Mk III parts are a lot easier to come by.

I suppose you could have an extractor made by a machinist, but that might be just as expensive as finding an original part.
Link Posted: 4/22/2015 10:29:01 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Quoted:


That design has been out of production for decades. The Mk III parts are a lot easier to come by.

I suppose you could have an extractor made by a machinist, but that might be just as expensive as finding an original part.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Quoted:
Quoted:
You weren't kidding! Any idea why these things are so rare these days?


That design has been out of production for decades. The Mk III parts are a lot easier to come by.

I suppose you could have an extractor made by a machinist, but that might be just as expensive as finding an original part.



Thanks for the answers everyone! All I can do is let dad know what the deal is and see if he wants to bite the bullet on one.
Link Posted: 4/22/2015 10:04:11 PM EDT
I've heard there might be some available here:

http://www.theactionworks.com/

It was a while back so they could be long gone.

Good Luck!
Link Posted: 4/27/2015 10:51:17 AM EDT
I know where there's about 10 in a big pile of hi power parts that he wont sell
Link Posted: 4/28/2015 4:23:27 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Quoted:
I've heard there might be some available here:

http://www.theactionworks.com/

It was a while back so they could be long gone.

Good Luck!
View Quote


I just sent him an email, it may be a long shot but it's worth a try!
Link Posted: 4/29/2015 4:42:39 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Quoted:


I just sent him an email, it may be a long shot but it's worth a try!
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Quoted:
Quoted:
I've heard there might be some available here:

http://www.theactionworks.com/

It was a while back so they could be long gone.

Good Luck!


I just sent him an email, it may be a long shot but it's worth a try!



You will have to get this one fitted.

http://www.ebay.com/itm/INGLIS-BROWNING-HP-PISTOL-SPARE-EXTRACTOR-NOS-Mint-in-the-Grease-/181730077361?pt=LH_DefaultDomain_0&hash=item2a4ff4eab1
Link Posted: 4/29/2015 5:16:00 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Discussion ForumsJump to Quoted PostQuote History
Quoted:
Quoted:
Quoted:
I've heard there might be some available here:

http://www.theactionworks.com/

It was a while back so they could be long gone.

Good Luck!


I just sent him an email, it may be a long shot but it's worth a try!



You will have to get this one fitted.

http://www.ebay.com/itm/INGLIS-BROWNING-HP-PISTOL-SPARE-EXTRACTOR-NOS-Mint-in-the-Grease-/181730077361?pt=LH_DefaultDomain_0&hash=item2a4ff4eab1


Foolish not to buy this NOW.
Cheapest I remember seeing was in the $100.00 range.
Link Posted: 4/30/2015 4:27:58 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Quoted:


Foolish not to buy this NOW.
Cheapest I remember seeing was in the $100.00 range.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Quoted:
Quoted:
Quoted:
Quoted:
I've heard there might be some available here:

http://www.theactionworks.com/

It was a while back so they could be long gone.

Good Luck!


I just sent him an email, it may be a long shot but it's worth a try!



You will have to get this one fitted.

http://www.ebay.com/itm/INGLIS-BROWNING-HP-PISTOL-SPARE-EXTRACTOR-NOS-Mint-in-the-Grease-/181730077361?pt=LH_DefaultDomain_0&hash=item2a4ff4eab1


Foolish not to buy this NOW.
Cheapest I remember seeing was in the $100.00 range.


I'm going to watch that one for sure, Don Williams at Action Works sent me to Jack First, they said they make them themselves. I may go ahead and order this one as a second anyway. I don't mind if either one has to be fitted a little.
Link Posted: 4/30/2015 8:09:26 PM EDT

One of those Ebay auction was from Northridge International.  I just checked and they have FN and Inglis extractors for $89.

I think, not sure here, but I bought a NOS from them for like $100 AT AUCTION  

Very pricey, but they aren't making them anymore and if you need one, well it was worth the price for me.





Link Posted: 6/6/2015 3:59:27 PM EDT
Northridge has Inglis and FN "early" style ones right now.

I just jumped on two.
http://www.northridgeinc.com/store/index.cfm/c222/i1637

I HIGHLY suggest calling in to order, much faster than their buggy website
Link Posted: 6/21/2015 9:06:25 AM EDT
Check out Browning and give their customer service a call. Ordered all new springs and drift pins. About a year ago they actually had them. I needed a newer one and wasn't sure which one to order by the listing. They had both. Great people to deal with.
Link Posted: 6/21/2015 11:24:28 PM EDT
Check with Jack First gun parts.

http://www.jackfirstgun.com/
Link Posted: 7/1/2015 7:03:55 PM EDT
IM sent
An error occurred on the server when processing the URL. Please contact the system administrator.

If you are the system administrator please click here to find out more about this error.