Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 7/27/2013 11:29:04 PM EST
Just wanted to know
Those plus the punch kits cost $150+
Link Posted: 7/27/2013 11:39:08 PM EST
YES!
Link Posted: 7/27/2013 11:51:19 PM EST
if you don't have to actually put the barrel into the upper receiver you only need a $5 home depot punch kit and a small hammer. There isnt much to them.
Link Posted: 7/27/2013 11:52:13 PM EST
if you don't have to actually put the barrel into the upper receiver you only need a $5 home depot punch kit and a small hammer. There isnt much to them.
Link Posted: 7/28/2013 8:05:51 AM EST
you could find someone with the tools... build days are also a good place.
Link Posted: 7/28/2013 8:46:13 AM EST
Link Posted: 12/12/2013 11:24:34 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By goldeyeslayer:
read this
View Quote


Yep, the advice on using tape covered vise grips made a huge difference in my frustration level. I only use the punches towards the end and it really cuts down on marking up the lower.

You are foolish not to own an armorers tool even if you don't build from parts, they are useful for many things. Get a solid one, not a flimsy one. I have this one and it's chunky: http://www.amazon.com/gp/product/B001M5TRI8/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1 I had to sand off the paint on the side where the 3 pins are to get it to grab the barrel nut, other than that it's fine.
Top Top