Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/17/2005 4:36:19 PM EST
Hi. I decided to take apart my Sig P228 tonight for a detailed cleaning. I striped down the frame completely. All went well accept the magazine catch. I put the magazine catch detent in wrong. Now the magazine catch does not work and I can’t get it out to fix it. Damn!

The detent holds the mag catch in. It has a shoulder on one side like a half-sphere. I put the shoulder facing to the right if you are looking at the gun from the muzzle. It goes in facing the left. What can I do aside from pounding the whole thing out and ruining my frame? There must be others out there that have done this. Please help. Thanks.
Link Posted: 12/17/2005 4:57:18 PM EST
Try using a very thin jeweler's screwdriver to reach in and compress the detent/spring so the mag catch can be removed.
Link Posted: 12/17/2005 6:20:54 PM EST
Link Posted: 12/17/2005 6:44:38 PM EST
gasoline and a match.....


burn that bastard out!!!
Link Posted: 12/17/2005 6:58:04 PM EST

Originally Posted By ikor:
One thing that has often worked for me in such situations is to put the gun down and leave it alone for a day or two. When you return to it, you may see the problem in a whole new light...seriously.

Good luck



+1. If you continue to fool with it now, you will "F" it up.
Link Posted: 12/18/2005 2:21:46 AM EST
You could always send it to SIGArms or find a SIG certified smith and let a professional fix it. May cost a few bucks, but perhaps it's worth it at this point.
Link Posted: 12/18/2005 2:47:32 AM EST
Link Posted: 12/18/2005 3:26:17 AM EST

Originally Posted By Bradd_D:

Originally Posted By ikor:
One thing that has often worked for me in such situations is to put the gun down and leave it alone for a day or two. When you return to it, you may see the problem in a whole new light...seriously.

Good luck



+1. If you continue to fool with it now, you will "F" it up.



Another +1. I took my Ruger P97 down like that when I first got it. Had lots of trouble getting all the trigger components back in. It took me a week messing with a few hours a day, but I got it back together and it worked. Or as others suggested take it to a gunsmith who is familiar with Sigs, I was almost to that point.
Link Posted: 12/18/2005 3:57:08 PM EST
Not familair with this particular part and how it sits in this pistol. So FWIW. I have removed pins that were not in a terrible bind or under pressure with compressed air and grease or pressurized water/liquid. If you can force something past it, it may just pop out. good luck
Link Posted: 12/18/2005 4:04:27 PM EST
Nuke from orbit it's the only way to be sure

really listen to him about taking a break I did the same thing with a trigger housing on
my pellet rifle. leave it be get a sammach,and beer come back when mojo is strong danya-son
Link Posted: 12/18/2005 4:13:08 PM EST
[Last Edit: 12/19/2005 5:20:00 AM EST by gotm4]
If you install the mag catch with it's retainer upside down, MOST of the time it has to be drilled out @ Sig.
Top Top