Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 9/5/2004 8:40:28 PM EST
[Last Edit: 9/5/2004 8:41:38 PM EST by CoyoteGray]
I jave a G21 that I clean in the kitchen sink, with hot water and dish soap using a plastic brush.
Works great..



C.g.
Link Posted: 9/5/2004 8:53:00 PM EST
[Last Edit: 9/5/2004 8:54:23 PM EST by twonami]
simple green, water rinse and towel dried followed by CLP.
I only stripped it apart completely once just out of curiosity, glad I had the disassembly/reassembly DVD
Link Posted: 9/6/2004 4:00:56 AM EST
[Last Edit: 9/6/2004 4:18:25 AM EST by Ronnies111]
300 RDS ???? b]Is that all ? What caliber ?

GLOCK 22C ...1000 IN BOX ...8 PRELOADED MAGS IN POUCH WITH SAFARILAND THIGH HOLSTER ......mixed between 185 gr. FMJ the rest 40 S/W 165 GRAIN
TACTICAL JACKETED HOLLOW POINT
LAW ENFORCEMENT AMMO

BERETTA TACTICAL 12 GA. ...75 - 500 GR. HOLLOW POINT SLUGS...50, 00 BUCK ...50 OF THESE ON A BANDOLEER...25 OF EACH

Better to much, than not enough !
Link Posted: 9/6/2004 5:16:54 AM EST

Originally Posted By Ronnies111:
300 RDS ???? b]Is that all ? What caliber ?

GLOCK 22C ...1000 IN BOX ...8 PRELOADED MAGS IN POUCH WITH SAFARILAND THIGH HOLSTER ......mixed between 185 gr. FMJ the rest 40 S/W 165 GRAIN
TACTICAL JACKETED HOLLOW POINT
LAW ENFORCEMENT AMMO

BERETTA TACTICAL 12 GA. ...75 - 500 GR. HOLLOW POINT SLUGS...50, 00 BUCK ...50 OF THESE ON A BANDOLEER...25 OF EACH

Better to much, than not enough !



WTF is this guy on? he has posted 3 times in 3 different threads with random BS. "lets see your green glocks " he posts " NO".... hey ASSHAT lay off the meth and stop licking your lips!


Anyway. back to the thread. After any amount of range time i strip the slide from the frame remove the rod and barrel. I usually don't remove the trigger housing from the frame when just doing a normal cleaning. I use hoppes #9 to remove any unburnt powder etc. Q-tip and rag usually. I use a boresnake on the barrel. I use CLP to lube it ( rails, barrel cam,barrel,inside of slide where the barrel makes contact, and one drop on the trigger bar connector. ). Put it back together and dry fire it with snap caps 3 or 4 times. I use simple green and a air compressor on my ARs.

J
Link Posted: 9/6/2004 7:37:10 PM EST

Originally Posted By CoyoteGray:
I jave a G21 that I clean in the kitchen sink, with hot water and dish soap using a plastic brush.
Works great..



C.g.



I do the same thing. Use hot water, plastic brush and let it air dry.
Link Posted: 9/7/2004 5:42:08 PM EST
I left mine in my pant pocket once. After I heard a clunking in the dryer, I pulled it out. It came out very nice with Snuggle fabric softner.
Link Posted: 9/7/2004 6:00:25 PM EST
I hardly ever do clean it... probably every 1000 rounds or so. I field strip, wipe down all parts in CLP, brush then patch out the bore with CLP, put a drop of CLP on the metal frame rails, re-assemble. Anything more than that is a waste of time.
Link Posted: 9/7/2004 6:13:07 PM EST
Link Posted: 9/7/2004 7:07:16 PM EST
Dishwasher
Link Posted: 9/8/2004 12:55:48 PM EST

Originally Posted By triburst1:
Dishwasher




I've read on the Glockfaq.com that the hi-temp water in a dishwasher can weaken the polymer.
Link Posted: 9/9/2004 3:24:42 AM EST
In 13 years I have cleaned my G17 four times, it has never failed me, when if ever it does fail, that's when I will clean it.
Link Posted: 9/9/2004 2:26:07 PM EST

Originally Posted By Boom_Stick:

Originally Posted By triburst1:
Dishwasher




I've read on the Glockfaq.com that the hi-temp water in a dishwasher can weaken the polymer.



Don't worry, I was only joking.
Link Posted: 9/9/2004 3:48:39 PM EST
I strip and clean throughly every 1000 rounds through my 19. But after every range session I at least completely clean the barrel, inside and out. That is mainly just to get rid of the carbon that will get all over everything the gun touches.
Link Posted: 9/9/2004 8:06:29 PM EST
I have a serious problem...I can't leave a gun uncleaned overnight. I know, I know, a Glock doesn't need it...but I do it anyways lol.
Link Posted: 9/9/2004 8:17:08 PM EST
Piss on it.
Link Posted: 9/10/2004 4:25:40 PM EST

Originally Posted By bvmjethead:
Piss on it.




...and it still won't rust.
Link Posted: 9/11/2004 2:24:32 PM EST
Link Posted: 9/11/2004 2:30:12 PM EST
I actually used the dishwasher...but then I got married
Link Posted: 9/11/2004 6:50:51 PM EST

Originally Posted By W-W:
I actually used the dishwasher...but then I got married


whipped
Link Posted: 9/11/2004 6:55:52 PM EST

Originally Posted By triburst1:
Dishwasher



Dude, I hope youre not doing dishes at the same time! Bleh!!!
Link Posted: 9/11/2004 6:58:21 PM EST
I use simple green, and a tooth brush. Followed by a good rinsing in the sink, and then air dry over night.

Lube it up real good, and put it all back together.

Seems to work for me.
Link Posted: 9/11/2004 7:00:33 PM EST

Originally Posted By W-W:
I actually used the dishwasher...but then I got married



Lead poisoning!
Link Posted: 9/12/2004 1:31:06 PM EST
new member here. Clean a Glock?
Link Posted: 9/12/2004 8:10:24 PM EST

Originally Posted By glcknsted:
new member here. Clean a Glock?



Welcome to the board...

Yeah.. some of us will clean them just to keep residue from getting on our clothes.
Link Posted: 9/24/2004 2:02:51 PM EST

Originally Posted By squeezecockerp7m8:
I have a serious problem...I can't leave a gun uncleaned overnight. I know, I know, a Glock doesn't need it...but I do it anyways lol.



Ditto here. Guilty as charged. Bring out the Q-tips and pipe cleaners.
Link Posted: 9/24/2004 2:03:26 PM EST

Originally Posted By squeezecockerp7m8:
I have a serious problem...I can't leave a gun uncleaned overnight. I know, I know, a Glock doesn't need it...but I do it anyways lol.



Ditto here. Guilty as charged. Bring out the Q-tips and pipe cleaners.
Link Posted: 9/24/2004 3:21:21 PM EST

Originally Posted By Aim4MyHead:

Anyway. back to the thread. After any amount of range time i strip the slide from the frame remove the rod and barrel. I usually don't remove the trigger housing from the frame when just doing a normal cleaning. I use hoppes #9 to remove any unburnt powder etc. Q-tip and rag usually. I use a boresnake on the barrel. I use CLP to lube it ( rails, barrel cam,barrel,inside of slide where the barrel makes contact, and one drop on the trigger bar connector. ). Put it back together and dry fire it with snap caps 3 or 4 times. I use simple green and a air compressor on my ARs.

J



That's what I do after every range trip, too. I can't imagine how gummed up mine would be if I didn't clean it. 13K+ rounds, and it still looks almost brand new when stripped.
Link Posted: 9/24/2004 3:51:56 PM EST
[Last Edit: 9/24/2004 3:53:16 PM EST by GTZ]
Well, because no one else said it yet, I use break clean, tooth brush and compressed air. I strip mine every 700 - 900 rounds. You can go longer, but I don't bother to find the limit. Mine is a G17, 16 years old. I clean the barrel, ramp, and oil it around every 200. I just kinda know when to do it I guess. I use it for IDPA so it sees about 400 rounds a month, not much.


And, the Q tip is the PERFECT tool for the extractor hole.
Link Posted: 9/27/2004 8:58:38 AM EST
Um, good question.
I need to think about cleaning my G19 some day. It's for range use only and has around 3500 rounds of Wolf through it.
It hasn't stopped working and I just want to see how far it will go before it does.
Link Posted: 9/28/2004 5:23:50 AM EST

Originally Posted By W-W:
I actually used the dishwasher...but then I got married



You know why, on the average, women have smaller feet than men don't you?...............So they can stand closer to the sink and stove.

I read that on a joke list somewhere. Use it with caution. Yea....it's sexist, but still some funny shit!

On topic..........I clean mine in the ordinary fashion after every range trip. Breakfree/FP-10, Gunscrubber (slide only), rod, Q-tips, etc. Probably not neccessary but, being a duty weapon, I am not taking chances. It gets a complete stripdown cleaning every six months during qual's. YMMV.
Top Top