Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/30/2006 3:26:08 PM EST
I was looking at a Ti receiver the other day and started wondering how you finish it.

Link Posted: 2/3/2006 6:49:25 AM EST
[Last Edit: 2/10/2006 10:07:28 AM EST by brickeyee]
Paint, but watch out for flourocarbons. They do not mix well with Ti. While CFCs are no longer used as aerosol propellants, related chemcals found in some markers can also cause Ti corrosion.
Chrome is another problem with Ti. no chrome plated tools should be used on Ti parts.
Some of the problems only occur at higher temps, but chrome is a no-no at any temp.

Cadmium is the problem metal for stress corrosion cracking of Ti.
Looked it up in my corrosion control manuals.
Cadmium can cause stress cracking if Ti without an underlying defect and without warning. The Cd enters the grain boundaries of the Ti and causes weakening.
Link Posted: 2/11/2006 5:05:12 AM EST
try www.metalfinishing.com
Top Top