Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/12/2003 7:17:37 PM EST
Made two sets of damascus 1911 grips just to see how they would turn out. They weigh in at 8.1 oz. each set. These are obviously not for everyday carry as they are heavy and need to be taken care of after use. They are pretty evil looking. Any thoughts?

Link Posted: 9/13/2003 5:56:34 AM EST
There may be a market for those or at least for HEAVY grips to help control recoil.
Link Posted: 9/13/2003 6:00:13 AM EST
Link Posted: 9/13/2003 7:02:38 AM EST
Me likey!
Link Posted: 9/13/2003 9:53:11 AM EST
sorry, but they don't trip my trigger
Link Posted: 9/13/2003 12:07:50 PM EST

can you checker them?
Link Posted: 9/13/2003 3:48:58 PM EST

All you need now is a Caspian damascus slide
Link Posted: 9/13/2003 4:32:55 PM EST
Wanna make some more????
Link Posted: 9/15/2003 10:30:21 AM EST
[Last Edit: 9/15/2003 10:32:20 AM EST by Green0]
Great idea but you can hardly see the Damascus figure as they have so much machining on them.

I would like to see a set of regular full length ambi safety grips in SMOOTH POLISHED. Or checkered classic double diamond 20LPI with the 2 Diamonds on each side polished polished.

I'm sure checkering would be a real bitch so thats why I said OR.

You could probably relieve the backside of the grips to lighten weight.

It's when you polish the Damascus that the figure shows up and they look bad ass

What special things have to be done to take care of them? Do they rust? Thanks for the pics though.

Link Posted: 9/15/2003 10:51:22 AM EST
Looks cool, kinda like snake skin.
Link Posted: 9/15/2003 6:14:14 PM EST
Well I need to say they were a pain in the A$$ to make. Had to slow the CNC machine down real slow. Drill and bore out screw holes. Mill ambi-safety cut. Sandblast, then etch in a light solution of acid. This is what actually brings out the appearance of the two steels. A light sanding w/ 600 grit and a light coat of militec. It may not seem like a long process but it is.

GreenO, I agree that the Gator back texture does not show off the damascus like I thought. There was only one way to find out though. Next time I have a days worth of nothing to do and $180 worth of damascus laying around I'll try a texture with some flats on them.

As for taking care of them, you would need to keep a light coat of oil on them when not in use. They will rust otherwise.

Like anything else, the more I play with them, the more I like them.
Link Posted: 9/16/2003 8:54:09 AM EST
Is there some type of clear epoxy that you can coat them with so that they won't rust? And I like the idea of hollowing out the back side so they won't be so heavy. GOOD JOB, BTW!!!
Link Posted: 9/16/2003 4:25:20 PM EST
So you will make me a set for $180 right

Could you perhaps make them out of two different grades of stainless so as not to be such a rust hazzard? I am showing what I know about metal now (not much).

I have a knife that has a layer of nickel in the carbon steel -- nice set of.

Please post pics if you do another set.
Link Posted: 9/18/2003 7:21:29 PM EST
I like the looks of those a lot. Too bad they are too cost prohibitive to make more of. If you decide to make up another set let me know.
Link Posted: 9/19/2003 4:22:53 AM EST
I really like the look of them. "Evil" is exactly right. The grain of the metal does kind of get lost in the machining, but that doesn't bother me much. I think Norrell's moly resin clear coat would be a good sealant to keep the rust off of them.

And regarding cost, there is no such thing as a firearm accessory that is too pricey. Look at all these people paying $1000 for a scope. When it comes to customization, people are looking for anything to set their guns apart from the rest. There is definitely a market for these.
Top Top