Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/19/2017 7:27:10 PM
Posted: 5/9/2003 3:33:32 AM EDT
Does anyone know where I can purchase a Beretta M92FS frame?

Thanks
Link Posted: 5/9/2003 5:37:32 AM EDT
Yeah, you get a free one with every 92FS purchase.
Link Posted: 5/9/2003 8:04:25 AM EDT
That is the "part" that requires an FFL as it is serial numbered.
Jim Dandy is basically correct, in his own way.
Link Posted: 5/9/2003 8:05:58 AM EDT

Originally Posted By Jim_Dandy:
Yeah, you get a free one with every 92FS purchase.



Thank you Captain Obvious. I have seen that .45 cal frames are available, was just wanting to know if there were M92s available.
Link Posted: 5/9/2003 8:32:07 AM EDT

Originally Posted By anothergene:
That is the "part" that requires an FFL as it is serial numbered.
Jim Dandy is basically correct, in his own way.



I figured that if I could purchase one it would have to be through a FFL. Just curious is all.
Link Posted: 5/9/2003 8:41:25 AM EDT
Unlike 1911s, Beretta and Taurus are the only manufacturers of that particular pistol design (unless of course the Chinese have reverse-engineered it like everything else) and they [Beretta and Taurus] have never sold anything but complete pistols.

The only way you'll get just a bare 92FS frame is to find one that has been stripped and parted out.
Link Posted: 5/9/2003 8:58:20 AM EDT
Thanks Jim, that's what I was looking for. So my intent of building a M92 is a pipe dream.

Oh well, on to other ideas for things to do.
Link Posted: 5/9/2003 9:14:24 AM EDT
Even if you did happen to find a 92 frame on the cheap, you're right back to having to get Beretta to sell you the parts.
Link Posted: 5/9/2003 10:30:33 AM EDT
Well, there were some 92FS 80% castings floating around a while back. In fact I just made a drill jig for an owner of one of these frames. I know of a couple guys who have finished them out, but they were more of a PT-99 design.

There should be some resellers out there of 92FS parts, like Numrich, etc. Buying the parts directly from Beretta is guaranteed to cost more than buying a gun.

Link Posted: 5/9/2003 11:20:32 AM EDT
See if you can contact Drew Ursin...head gunsmith...at Beretta USA. If there are any to be had, he should know.
Link Posted: 5/9/2003 11:51:36 AM EDT

Well, there were some 92FS 80% castings floating around a while back.

Tannery Shop?



There should be some resellers out there of 92FS parts, like Numrich, etc.

I don't think that there are a great deal of these out there and I believe most are used.
Link Posted: 5/9/2003 12:26:09 PM EDT


Tannery Shop?



Yes.


There should be some resellers out there of 92FS parts, like Numrich, etc.

I don't think that there are a great deal of these out there and I believe most are used.

I see them pop up on the auction sites every couple months.
Link Posted: 5/9/2003 5:41:11 PM EDT

Originally Posted By Stryker_11A:
Does anyone know where I can purchase a Beretta M92FS frame?

Thanks


I was just thinking that it was assumed the frame was an off the shelf part, like a firing pin or other part.
I also didn't know if you had a broken one and needed it replaced.
Everybody and their brother seems to make 1911 parts, including some frames...no such deal on the 92, unfortunately.
Would the next best choice be to find a beater 92, and work with that?
At least most of the parts would be included.
Link Posted: 5/11/2003 1:51:24 PM EDT

Originally Posted By Stryker_11A:
Thanks Jim, that's what I was looking for. So my intent of building a M92 is a pipe dream.

Were you just wanting to build one just for the sake of building one, or was there a special configuration you want that isn't normall available?
Link Posted: 5/12/2003 12:38:06 PM EDT
Pretty much just wanted to build one for the sake of doing it. I am going to turn my efforts to making a .45 now, thanks everyone for their input.
Link Posted: 5/12/2003 7:48:25 PM EDT
krititool.com has them, if you find a parts kit, could you let me know?
Link Posted: 5/13/2003 6:20:41 PM EDT
sorry, forgot the s, it is kristitool.com
Link Posted: 5/15/2003 3:10:17 PM EDT
Well, Patrick, here you go:

Parts

Frame

You're out $410 plus materials. You can just about buy a 92FS for that.
Link Posted: 5/15/2003 3:15:46 PM EDT
Thanks guys, everyone has been a big help. You are right, if I want a M92 I may as well just buy one.
Top Top