Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/16/2002 10:37:05 AM EST
Field strip a Lorcin pistol (besides hitting it with a rock)? A friend has one (yeah, I know, friends don't let friends shoot Lorcins, Bryco, etc), and it will not fire. He has cleared it, but cannot figure out how to remove the slide. Since he is in another state, I can't look at it to figure it out.

Does anyone know how?
Link Posted: 8/16/2002 11:09:37 AM EST

He's much better off not striping it. But there is a takedown button on it somewhere that is used to get the slide off.
Link Posted: 8/16/2002 2:39:51 PM EST
I told him to beat it with a brick until it was factory fresh. He didn'think it was funny.

So there is a takedown button? Hmmmm... That sounds hard to miss.
Link Posted: 8/16/2002 3:41:11 PM EST
If memory serves me, you push in the back of the firing pin as you pull back & up on the slide. The firing pin doubles as the ejector.

This is for either a Lorcin or Jennings, I cannot remember which.
Link Posted: 8/16/2002 5:44:24 PM EST
Link Posted: 8/17/2002 10:29:46 AM EST
There is a little button that fits into the rear of the slide, that holds the rear of the firing pin. It has a hook on its bottom that retains the slide. If you push this button in, you can remove the slide by lifting it up from the rear and then moving it forward off the barrel like the Walthers.

But be careful, the firing pin is springloaded and has a distinct tendency to launch itself right into your eye.
Link Posted: 8/17/2002 12:42:27 PM EST
Just go shoot it some more and it will "remove the slide" all by itself.
Top Top