Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/12/2006 4:22:18 PM EST
I think something may be wrong with the trigger on my 92FS Vertec. When the hammer is cocked back, there is about a half inch of loose pull in the trigger before there is any pressure on it and it fires. This makes it difficult to fire sometimes. I was under the impression that when the hammer is back the trigger shouldnt require much pull at all. I dont have easy access to another 92 at the moment so I dont know if this is normal or not, but I really dont like it. I dunno if this is a good description of the situation or not, but any input is appreciated.
Link Posted: 1/13/2006 12:42:17 AM EST
My 92 trigger does the same thing. A good gunsmith should be able to take out some of the slack.

This is the main reason I prefer single-action autos.

Link Posted: 1/14/2006 2:35:59 PM EST
The "loose pull" you describe is normally called "trigger take-up". This is normal in all traditional DA handguns. I have no problems with this system, personally.

One way to get used to this is to dry it over & over & over. If you cannot seem to get used to it, you may have to either buy the Beretta Target model which is single action only or move to another type gun.

My .o2
Top Top