Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Site Notices
Arrow Left Previous Page
Page / 4
Posted: 2/20/2011 11:34:28 PM EST
[Last Edit: SGB]
I thought it was about time we had a 1911 pay it forward thread. SGB was nice enough to allow this, so let's make the most of it.





Have any extra bits laying around that someone else could use? Here is your chance to earn some karma, and maybe pick up that item that you've been meaning to get
These are the rules.





- Post a 1911 related item you no longer need or use.





- The First to respond with an I'll take it posted in the thread has claim to the item.





- Keep ALL transactions legal and above board. All transactions to be conducted within the thread itself and NO IM/Email transactions other than shipping information. This keeps the back door snipers out of the picture and no one will get upset over a lost opportunity.





- Postage is to be worked out via IM or Email by the giver and the receiver.





- Multiple items are allowed in such that ... "I have 5 of these who wants ONE ?" This gives 5 different people involved in the process. Not someone grabbing all 5 of the items. Lets be friendly AND fair in this.





- FEEDBACK, this is a friendly giveaway/trade transaction and not a buy/sell transaction. So feedback isn't necessarily required by EE standards. So if feedback is posted by some and not by others don't get your whitey tighties in a bunch if it doesn't happen.





THERE IS TO BE NO SELLING OR TRADING OF ITEMS.



ETA: 03-18-2011 -Gentlemen
if you offer an item up as available and then fail to follow through on
delivering the item to the member who claims it you will at minimum be
locked out of this forum.- SGB





Link Posted: 2/20/2011 11:36:25 PM EST
[#1]
Figure since this is my thread, I'll be the first up.

2 Tripp 45Flex followers. FOL-FLX-45 Brandy new, bought on mistake. First I'll take it, gets them.
Link Posted: 2/21/2011 11:40:33 AM EST
[#2]
I've got an STI FLGR and plug from an STI Trojan.
Link Posted: 2/21/2011 2:20:34 PM EST
[#3]
I'll take the FLGR if it's for a 5"  




I'd like to offer up a Novak rear night site (takeoff from a Springfield Champion 4") and a stainless single side safety lever (takeoff from a Colt Delta Elite)
Link Posted: 2/21/2011 4:50:07 PM EST
[Last Edit: DoubleARon] [#4]
It's for a 5". IM me with your address.

ETA: Just noticed you're USAF retired. I won't hold that against you.
Link Posted: 2/21/2011 7:22:05 PM EST
[#5]
Originally Posted By Colt45guy:
I'll take the FLGR if it's for a 5"  




I'd like to offer up a Novak rear night site (takeoff from a Springfield Champion 4") and a stainless single side safety lever (takeoff from a Colt Delta Elite)


I would like these please.   As a New 1911 guy I do not have much BUT if some one wants a either a Tapco AK grip or a standard AR grip just PM me.
Link Posted: 2/21/2011 9:32:20 PM EST
[Last Edit: LittleMagic] [#6]
Link Posted: 2/21/2011 10:59:35 PM EST
[#7]
I'll Take the Tripp Followers CombatMP.

And I will offer up a Wilson Drop In Bevertail.  Should still have the bag and everything. . .
Link Posted: 2/21/2011 11:02:57 PM EST
[Last Edit: CodeSeven] [#8]
I could really use the stainless thumb safety if it's still up for grabs. I would also like to throw in a blued serrated full size mainspring housing. claimed by WindRiver78
Link Posted: 2/21/2011 11:31:03 PM EST
[Last Edit: irag2362] [#9]
Originally Posted By LittleMagic:
Originally Posted By Colt45guy:
I'll take the FLGR if it's for a 5"  




I'd like to offer up a Novak rear night site (takeoff from a Springfield Champion 4") and a stainless single side safety lever (takeoff from a Colt Delta Elite)



I'll take the rear novak sight.

Since someone failed to read the rules (#5) ;)



I disagree, I read the rules and feel I was following them. the rule(#5) states Multiple items which I take for example "5 sets of grips"  , the post was for 2 different items of 1 qty each.   I requested both items which is in my interpretation following the rules. I have also emailed the poster requesting his address so I may send postage along with my address for the items.


and CombatMP great idea for the 1911 section.


Link Posted: 2/22/2011 2:58:28 AM EST
[#10]
Originally Posted By MercuryHayze:
I'll Take the Tripp Followers CombatMP.

And I will offer up a Wilson Drop In Bevertail.  Should still have the bag and everything. . .


i'll take the beavertail if its still up for grabs
Link Posted: 2/22/2011 5:38:15 AM EST
[#11]
Originally Posted By irag2362:
Originally Posted By LittleMagic:
Originally Posted By Colt45guy:
I'll take the FLGR if it's for a 5"  




I'd like to offer up a Novak rear night site (takeoff from a Springfield Champion 4") and a stainless single side safety lever (takeoff from a Colt Delta Elite)



I'll take the rear novak sight.

Since someone failed to read the rules (#5) ;)



I disagree, I read the rules and feel I was following them. the rule(#5) states Multiple items which I take for example "5 sets of grips"  , the post was for 2 different items of 1 qty each.   I requested both items which is in my interpretation following the rules. I have also emailed the poster requesting his address so I may send postage along with my address for the items.


and CombatMP great idea for the 1911 section.




Sorry LittleMagic––-I've gotta go with irag2362 on this one.  First to post, and it is for single items.  

Just so both irag2362 and LittleMagic know, this Novak only works on the short 1911s.  It'll shoot really high on a 5".
Link Posted: 2/22/2011 5:50:32 AM EST
[#12]
thanks for the reply on the sight.. I do have a 5" SA GI but would still like the safety if I could please.
Link Posted: 2/24/2011 12:30:35 AM EST
[#13]
Originally Posted By lostman518:
Originally Posted By MercuryHayze:
I'll Take the Tripp Followers CombatMP.
And I will offer up a Wilson Drop In Bevertail.  Should still have the bag and everything. . .

i'll take the beavertail if its still up for grabs

Damn...I should check here more often.

Well I have some Mil Spec parts, mainspring housing, thumb safety, hammer, etc.

Looking for a Drop in Beavertail, loop hammer, stainless trigger....
Link Posted: 2/25/2011 12:13:11 AM EST
[#14]
Originally Posted By wrightone:
Originally Posted By lostman518:
Originally Posted By MercuryHayze:
I'll Take the Tripp Followers CombatMP.
And I will offer up a Wilson Drop In Bevertail.  Should still have the bag and everything. . .

i'll take the beavertail if its still up for grabs

Damn...I should check here more often.

Well I have some Mil Spec parts, mainspring housing, thumb safety, hammer, etc.

Looking for a Drop in Beavertail, loop hammer, stainless trigger....


I could use the mil spec parts.  

I have an unknown maker stainless extended slide stop and safety.
Link Posted: 3/18/2011 3:11:04 PM EST
[#15]



Originally Posted By Colt45guy:


I'll take the FLGR if it's for a 5"  
I'd like to offer up a Novak rear night site (takeoff from a Springfield Champion 4") and a stainless single side safety lever (takeoff from a Colt Delta Elite)


Did you get the package?



 
Link Posted: 3/18/2011 4:27:21 PM EST
[Last Edit: SGB] [#16]
Link Posted: 3/18/2011 7:54:48 PM EST
[#17]
has anyone heard from Colt45guy? he was going to send me some stuff but nothing showed and he hasn't answered emails, anyone know him? is he ok?
Link Posted: 3/18/2011 9:04:01 PM EST
[#18]
Link Posted: 3/18/2011 9:06:26 PM EST
[#19]
Link Posted: 4/4/2011 1:56:01 PM EST
[Last Edit: azlester] [#20]
t is a shame that this thread has not been better received. When these pay it forward threads work they work very well indeed. Unfortunately the only extra/spare 1911 stuff I had sold at the last garage sale I had or I would be putting up some items.
If you offer up something, please make sure that you follow through. On other forums when I have offered up items and followed through the payback I received far outweighed the value of the items. Payback isn't always going to be something you can put your hands on...more times then not it is the good feeling you get by  helping a person achieve something they may not or couldn't have done on their own.
Just my $.02 worth for a Monday morning
Link Posted: 4/4/2011 2:47:04 PM EST
[#21]
Let's get this thread back on track.

I have a stainless steel Wilson Combat drop-in beavertail intended to fit a Colt Government.  

I may have some other stuff I have no use for, will update when I get home.
Link Posted: 4/4/2011 3:01:47 PM EST
[Last Edit: jdubya87] [#22]
I have a set of wraparound hogue grips lying around in my garage, govt size. They are kind of dry, but for a range gun, should suffice for anybody who wants them.
Link Posted: 4/4/2011 7:47:33 PM EST
[Last Edit: irag2362] [#23]
Originally Posted By ken_mays:
Let's get this thread back on track.

I have a stainless steel Wilson Combat drop-in beavertail intended to fit a Colt Government.  

I may have some other stuff I have no use for, will update when I get home.


was it modified already? if not I will take it! if there is a matching hammer,I wont be shy and request it too..lol .

I have a SA GI trigger, MSH and slide release I can offer up.
Link Posted: 4/4/2011 8:21:44 PM EST
[#24]
Originally Posted By irag2362:

I have a SA GI trigger, MSH and slide release I can offer up.


If the slide stop is blued, and GI short style I would like it please.
Link Posted: 4/4/2011 8:25:05 PM EST
[#25]
Originally Posted By irag2362:
Originally Posted By ken_mays:
Let's get this thread back on track.

I have a stainless steel Wilson Combat drop-in beavertail intended to fit a Colt Government.  

I may have some other stuff I have no use for, will update when I get home.


was it modified already? if not I will take it! if there is a matching hammer,I wont be shy and request it too..lol .

I have a SA GI trigger, MSH and slide release I can offer up.


It hasn't been fitted.   PM me your address and I'll get it out to you.
Link Posted: 4/4/2011 8:31:16 PM EST
[Last Edit: irag2362] [#26]
awesome thanks...

as I said before

I have a SA GI trigger, MSH and slide release I can offer up. as well as a AR grip and a AK grip.
Link Posted: 4/4/2011 10:13:54 PM EST
[Last Edit: THOLL223] [#27]
Got a Wilson Extended Slide Release, stainless glass beaded up for grabs.  Headed out to johnnypantz!







 
Link Posted: 4/5/2011 5:52:19 AM EST
[Last Edit: johnnypantz] [#28]
Originally Posted By THOLL223:
Got a Wilson Extended Slide Release, stainless glass beaded up for grabs.  

]



I'll take this please,


recieved it today! thanks THoll223

Posted Via AR15.Com Mobile
Link Posted: 4/5/2011 1:56:16 PM EST
[#29]
Originally Posted By CodeSeven:
I could really use the stainless thumb safety if it's still up for grabs.  I would also like to throw in a blued serrated full size mainspring housing.


I could use the blued serrated MSH if it's still available.

I have a govt. slide stop of unknown origin if anyone would like to have it.
Link Posted: 4/9/2011 11:47:24 PM EST
[#30]
Originally Posted By irag2362:
awesome thanks...

as I said before

I have a SA GI trigger, MSH and slide release I can offer up. as well as a AR grip and a AK grip.


I could really use the trigger.

I still have a stainless extended slide stop and safety available
Link Posted: 4/10/2011 4:17:58 AM EST
[#31]
Originally Posted By KJB:
Originally Posted By irag2362:
awesome thanks...

as I said before

I have a SA GI trigger, MSH and slide release I can offer up. as well as a AR grip and a AK grip.


I could really use the trigger.

I still have a stainless extended slide stop and safety available


trigger is on the way ..
Link Posted: 4/12/2011 2:40:51 PM EST
[Last Edit: THOLL223] [#32]


 
Link Posted: 4/12/2011 5:25:15 PM EST
[#33]
Originally Posted By KJB:
Originally Posted By irag2362:
awesome thanks...

as I said before

I have a SA GI trigger, MSH and slide release I can offer up. as well as a AR grip and a AK grip.


I could really use the trigger.

I still have a stainless extended slide stop and safety available


I will take both of those if they are still available.
Link Posted: 4/14/2011 3:58:11 AM EST
[#34]
NVG dude, sorry the parts are gone.. I didnt see your post till now.
Link Posted: 11/19/2012 7:17:01 PM EST
[#35]
I have a like new set of Hogue finger grove grips of a Colt Defender
Link Posted: 11/19/2012 9:23:29 PM EST
[#36]
I'll take the defender grips if still available PM sent
Link Posted: 11/19/2012 9:30:23 PM EST
[Last Edit: SleeperShooter] [#37]
-SleeperShooter

ETA:  Damn that was quick!!  They're spoken for.
Link Posted: 12/6/2012 8:06:09 AM EST
[Last Edit: UNIT6639] [#38]
I have some stuff in my basement taking up space.

Stainless grip screws, slotted

Plastic flat MSH, looks to have been painted black, no internals

Stainless Arched MSH

Plastic short trigger

Faux stag head grips for full size frame

I could use a right hand holster and a beavertail for a full size frame.
Link Posted: 12/6/2012 10:43:43 AM EST
[#39]
I could us a flat  govt MSH and even anyone base any govt ambi grips laying around I could use some badly.. I don't have much for 1911 but I have some ar a2 grips laying sound if anyone Need's some
Link Posted: 12/7/2012 11:25:21 PM EST
[#40]
Originally Posted By UNIT6639:
I have some stuff in my basement taking up space.

Stainless grip screws, slotted

Stainless Arched MSH

Plastic short trigger

Faux stag head grips for full size frame

I could use a right hand holster and a beavertail for a full size frame.


id like this if still available. .
Link Posted: 12/7/2012 11:46:25 PM EST
[#41]
Originally Posted By leveractionjackson:
I have a like new set of Hogue finger grove grips of a Colt Defender


Holy year and a half bump batman!!!

I have some stuff in the parts box.  I need to go through it tomorrow but I'll put them up here.
Link Posted: 12/8/2012 5:19:33 AM EST
[#42]
Sorry, I didnt realize this thread was that old. JM2, the MSH is yours.
Link Posted: 12/8/2012 6:11:08 AM EST
[#43]
Originally Posted By UNIT6639:
I have some stuff in my basement taking up space.

Stainless grip screws, slotted

Stainless Arched MSH

Plastic short trigger

Faux stag head grips for full size frame

I could use a right hand holster and a beavertail for a full size frame.




I could use the Faux Stag grips and I have a Wilson drop in stainless beavertail..... It has been bead blasted but its in great shape.....
Link Posted: 12/8/2012 6:39:46 AM EST
[#44]
IM sent rod, grips are yours! And I will take the wilson grip safety.
Link Posted: 12/8/2012 6:49:54 AM EST
[Last Edit: UNIT6639] [#45]
Ok, Faux stag grips are gone to Rod727

MSH is gone to JM2

I also could use a stainless bushing and a set of thin grips for a full size if anyone has some they dont need.

I also have a set of full size cocobolo non ambi grips I wont be using , anybody is welcome to any of the stuff I listed.
Link Posted: 12/8/2012 4:28:58 PM EST
[Last Edit: 1969GTX] [#46]


#1  Springfield Mil-Spec trigger, circa 2002.

#2  Springfield Mil-Spec arched msh w/ ILS, no guts.  Serrations removed, checkering added.

#3  Wilson SS barrel bushing. UNIT6639 has dibs

#4  Group Gripper spring guide and link.  Originally purchased from WC back around 2004.  Helps lock-up on loose fitting barrels

One item per member please.  If you want something, post it below and send me an im w/ shipping info.

Merry Christmas
Link Posted: 12/8/2012 10:51:47 PM EST
[#47]
Originally Posted By UNIT6639:
Ok, Faux stag grips are gone to Rod727

MSH is gone to JM2

I also could use a stainless bushing and a set of thin grips for a full size if anyone has some they dont need.

I also have a set of full size cocobolo non ambi grips I wont be using , anybody is welcome to any of the stuff I listed.


i hate to ask for so much but i could really use the non ambi grips too.   i hate the ambi grips on my non ambi gun!
Link Posted: 12/9/2012 9:57:56 AM EST
[#48]
JM2, I will throw the grips in with the MSH.
Link Posted: 12/9/2012 9:59:55 AM EST
[#49]
IM sent on the SS Wilson Bushing.
Link Posted: 12/9/2012 11:19:44 AM EST
[#50]
i appreciate it.  

anyone want a set a smith and wesson j frame uncle mikes rubber grips let me know
Arrow Left Previous Page
Page / 4
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top