Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/16/2003 10:07:30 AM EST
What do you use to neutralize copper cleaners with ammonia with? Is it vinegar and hpwe do you do this ?

Link Posted: 12/16/2003 10:17:59 AM EST
A couple passes with an oil soaked patch, has worked for years see no sense in trying to re-invent the wheel.
Link Posted: 12/16/2003 11:22:39 AM EST
Some folks like to use isopropyl alcohol for reasons that I’ve never understood. It typically has water in it, so I don’t like the idea myself. Personally, I patch the solvent out as best as I can and then run a couple of Kroil soaked patches down the bore for that purpose. I then patch that out and then use CLP or whatever in the bore.
Link Posted: 12/16/2003 2:47:48 PM EST
thanks, I have the kroil and other lubes including clp and I will stick to those
Link Posted: 12/16/2003 5:12:20 PM EST
After using sweets, a very strong ammonia based copper cleaner, I hit it again with a few patches of MPro7, works great. I'll even brush it again to just make sure it's all out. I use to use 'gunscrubber' in the past, but.. it's expensive and smelly.
Top Top