Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/6/2001 10:10:38 AM EST
I have a post ban upper that has a muzzle brake attached. It looks similar to the standard brake, with cut slots (not "fake ones") and is attached to what appears to be my threaded barrel. It looks like there is a lock washer in between-and also is pinned in the bottom-but not welded or soldered. It is also "oversized" so that a bayonet could not fit over it, and also the end is closed except for the hole for the bullet-not open like military type. Is this legal to use on a post ban rifle? I have heard as long as it is pinned you are ok and as long as it is pinned and soldered over you are ok, and as long as it is pinned, but not a actual muzzle brake(no 'real' slots) you are ok... Does anybody know what is ok? Ok? I have looked arund on this site but have only found many different, not absolute opinions. Does soldering the brake on affect the barrel having to heat it that high-and is it absolutely necessary if it is already pinned? Thanks.
Link Posted: 11/6/2001 12:28:30 PM EST
Link Posted: 11/7/2001 5:06:44 AM EST
Thanks, I dont think my pin is welded over-I will check and do it if not!
Link Posted: 11/7/2001 9:24:32 PM EST
Troy, I wonder what you meant by saying "As for the muzzle brake itself, it should be fine". Are you saying the way the brake's attached is okay for a postban??? plz advise, thanks.
Link Posted: 11/8/2001 6:53:12 AM EST
[Last Edit: 11/8/2001 6:46:49 AM EST by SBR7_11]
Brake/flash enhancers are legal on a "Post-Ban". If installed to a threaded barrel, must be permantly attached to be legal via the threaded barrel. NO flash suppressor/muzzle cans allowed on a post ban.
Link Posted: 11/8/2001 11:45:30 AM EST
Top Top